Fix kerneldoc syntax in v4l2-async. The references were not produced
correctly.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
---
Documentation/driver-api/media/tx-rx.rst | 8 ++---
.../media/v4l/ext-ctrls-image-process.rst | 2 ++
include/media/v4l2-async.h | 30 +++++++++----------
3 files changed, 21 insertions(+), 19 deletions(-)
diff --git a/Documentation/driver-api/media/tx-rx.rst b/Documentation/driver-api/media/tx-rx.rst
index 4c8584e7b6f2..12d492d25df2 100644
--- a/Documentation/driver-api/media/tx-rx.rst
+++ b/Documentation/driver-api/media/tx-rx.rst
@@ -5,7 +5,7 @@
Pixel data transmitter and receiver drivers
===========================================
-V4L2 supports various devices that transmit and receiver pixel data. Examples of
+V4L2 supports various devices that transmit and receive pixel data. Examples of
these devices include a camera sensor, a TV tuner and a parallel or a CSI-2
receiver in an SoC.
@@ -95,9 +95,9 @@ LP-11 and LP-111 modes
The transmitter drivers must, if possible, configure the CSI-2 transmitter to
*LP-11 or LP-111 mode* whenever the transmitter is powered on but not active,
-and maintain *LP-11 or LP-111 mode* until stream on. Only at stream on should
-the transmitter activate the clock on the clock lane and transition to *HS
-mode*.
+and maintain *LP-11 or LP-111 mode* until stream on. Only at stream on time
+should the transmitter activate the clock on the clock lane and transition to
+*HS mode*.
Some transmitters do this automatically but some have to be explicitly
programmed to do so, and some are unable to do so altogether due to
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
index 37dad2f4df8c..ed65fb594cc8 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
@@ -37,6 +37,8 @@ Image Process Control IDs
by selecting the desired horizontal and vertical blanking. The unit
of this control is Hz.
+.. _v4l2-cid-pixel-rate:
+
``V4L2_CID_PIXEL_RATE (64-bit integer)``
Pixel rate in the source pads of the subdev. This control is
read-only and its unit is pixels / second.
diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h
index 5b275a845c20..fa4901162663 100644
--- a/include/media/v4l2-async.h
+++ b/include/media/v4l2-async.h
@@ -129,11 +129,11 @@ void v4l2_async_debug_init(struct dentry *debugfs_dir);
*
* This function initializes the notifier @asd_list. It must be called
* before adding a subdevice to a notifier, using one of:
- * @v4l2_async_notifier_add_fwnode_remote_subdev,
- * @v4l2_async_notifier_add_fwnode_subdev,
- * @v4l2_async_notifier_add_i2c_subdev,
- * @__v4l2_async_notifier_add_subdev or
- * @v4l2_async_notifier_parse_fwnode_endpoints.
+ * v4l2_async_notifier_add_fwnode_remote_subdev(),
+ * v4l2_async_notifier_add_fwnode_subdev(),
+ * v4l2_async_notifier_add_i2c_subdev(),
+ * __v4l2_async_notifier_add_subdev() or
+ * v4l2_async_notifier_parse_fwnode_endpoints().
*/
void v4l2_async_notifier_init(struct v4l2_async_notifier *notifier);
@@ -145,9 +145,9 @@ void v4l2_async_notifier_init(struct v4l2_async_notifier *notifier);
* @asd: pointer to &struct v4l2_async_subdev
*
* \warning: Drivers should avoid using this function and instead use one of:
- * @v4l2_async_notifier_add_fwnode_subdev,
- * @v4l2_async_notifier_add_fwnode_remote_subdev or
- * @v4l2_async_notifier_add_i2c_subdev.
+ * v4l2_async_notifier_add_fwnode_subdev(),
+ * v4l2_async_notifier_add_fwnode_remote_subdev() or
+ * v4l2_async_notifier_add_i2c_subdev().
*
* Call this function before registering a notifier to link the provided @asd to
* the notifiers master @asd_list. The @asd must be allocated with k*alloc() as
@@ -200,7 +200,7 @@ __v4l2_async_notifier_add_fwnode_remote_subdev(struct v4l2_async_notifier *notif
* function also gets a reference of the fwnode which is released later at
* notifier cleanup time.
*
- * This is just like @v4l2_async_notifier_add_fwnode_subdev, but with the
+ * This is just like v4l2_async_notifier_add_fwnode_subdev(), but with the
* exception that the fwnode refers to a local endpoint, not the remote one.
*/
#define v4l2_async_notifier_add_fwnode_remote_subdev(notifier, ep, type) \
@@ -265,13 +265,13 @@ void v4l2_async_notifier_unregister(struct v4l2_async_notifier *notifier);
* sub-devices allocated for the purposes of the notifier but not the notifier
* itself. The user is responsible for calling this function to clean up the
* notifier after calling
- * @v4l2_async_notifier_add_fwnode_remote_subdev,
- * @v4l2_async_notifier_add_fwnode_subdev,
- * @v4l2_async_notifier_add_i2c_subdev,
- * @__v4l2_async_notifier_add_subdev or
- * @v4l2_async_notifier_parse_fwnode_endpoints.
+ * v4l2_async_notifier_add_fwnode_remote_subdev(),
+ * v4l2_async_notifier_add_fwnode_subdev(),
+ * v4l2_async_notifier_add_i2c_subdev(),
+ * __v4l2_async_notifier_add_subdev() or
+ * v4l2_async_notifier_parse_fwnode_endpoints().
*
- * There is no harm from calling v4l2_async_notifier_cleanup in other
+ * There is no harm from calling v4l2_async_notifier_cleanup() in other
* cases as long as its memory has been zeroed after it has been
* allocated.
*/
--
2.30.2
