On Thu, Jun 17, 2021 at 10:12:26AM +0200, Hans Verkuil wrote:
> On 17/06/2021 09:42, Jacopo Mondi wrote:
> > Hello,
> >
> > On Thu, Jun 17, 2021 at 08:18:42AM +0200, Hans Verkuil wrote:
> >> On 17/06/2021 02:14, Laurent Pinchart wrote:
> >>> Hi Jacopo,
> >>>
> >>> Thank you for the patch.
> >>>
> >>> This should be moved before 11/15 to avoid a bisection breakage (or
> >>> 11/15 should be fixed, and this patch updated accordingly).
> >>
> >> Good catch!
> >
> > Good catch indeed... Sorry about this I shuffled patches around
> > multiple times and missed this one
> >
> >>
> >> Jacopo, I dropped the PR I made. It you just want to swap patch 11 and 12,
> >> then I can do that, if you want more extensive changes, then I need a v6.
> >>
> >> Let me know what you want.
> >
> > I think swapping 11 and 12 is enough, thanks for handling it.
> > (BTW there's one additional tag from Kieran to collect which is not in
> > v5. Would you like a v6 for that ?)
>
> Updated the PR and added Kieran's tag. So no need for you to do anything.
Thanks a lot then and sorry for hiccup
>
> Regards,
>
> Hans
>
> >
> > Thanks
> > j
> >
> >>
> >> Hans
> >>
> >>>
> >>> On Wed, Jun 16, 2021 at 02:46:13PM +0200, Jacopo Mondi wrote:
> >>>> There's no reason to allocate dynamically the 'serializer' field in
> >>>> the driver structure.
> >>>>
> >>>> Embed the field and adjust all its users in the driver.
> >>>>
> >>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> >>>> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
> >>>> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >>>> ---
> >>>> drivers/media/i2c/rdacm20.c | 36 +++++++++++++++---------------------
> >>>> 1 file changed, 15 insertions(+), 21 deletions(-)
> >>>>
> >>>> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
> >>>> index 5e0314a2b1ca..029af8fd7485 100644
> >>>> --- a/drivers/media/i2c/rdacm20.c
> >>>> +++ b/drivers/media/i2c/rdacm20.c
> >>>> @@ -312,7 +312,7 @@ static const struct ov10635_reg {
> >>>>
> >>>> struct rdacm20_device {
> >>>> struct device *dev;
> >>>> - struct max9271_device *serializer;
> >>>> + struct max9271_device serializer;
> >>>> struct i2c_client *sensor;
> >>>> struct v4l2_subdev sd;
> >>>> struct media_pad pad;
> >>>> @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
> >>>> {
> >>>> struct rdacm20_device *dev = sd_to_rdacm20(sd);
> >>>>
> >>>> - return max9271_set_serial_link(dev->serializer, enable);
> >>>> + return max9271_set_serial_link(&dev->serializer, enable);
> >>>> }
> >>>>
> >>>> static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
> >>>> @@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
> >>>> unsigned int retry = 3;
> >>>> int ret;
> >>>>
> >>>> - max9271_wake_up(dev->serializer);
> >>>> + max9271_wake_up(&dev->serializer);
> >>>>
> >>>> /* Serial link disabled during config as it needs a valid pixel clock. */
> >>>> - ret = max9271_set_serial_link(dev->serializer, false);
> >>>> + ret = max9271_set_serial_link(&dev->serializer, false);
> >>>> if (ret)
> >>>> return ret;
> >>>>
> >>>> @@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
> >>>> * Ensure that we have a good link configuration before attempting to
> >>>> * identify the device.
> >>>> */
> >>>> - max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
> >>>> - MAX9271_I2CSLVTO_1024US |
> >>>> - MAX9271_I2CMSTBT_105KBPS);
> >>>> + max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
> >>>> + MAX9271_I2CSLVTO_1024US |
> >>>> + MAX9271_I2CMSTBT_105KBPS);
> >>>>
> >>>> - max9271_configure_gmsl_link(dev->serializer);
> >>>> + max9271_configure_gmsl_link(&dev->serializer);
> >>>>
> >>>> - ret = max9271_verify_id(dev->serializer);
> >>>> + ret = max9271_verify_id(&dev->serializer);
> >>>> if (ret < 0)
> >>>> return ret;
> >>>>
> >>>> - ret = max9271_set_address(dev->serializer, dev->addrs[0]);
> >>>> + ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
> >>>> if (ret < 0)
> >>>> return ret;
> >>>> - dev->serializer->client->addr = dev->addrs[0];
> >>>> + dev->serializer.client->addr = dev->addrs[0];
> >>>>
> >>>> /*
> >>>> * Reset the sensor by cycling the OV10635 reset signal connected to the
> >>>> * MAX9271 GPIO1 and verify communication with the OV10635.
> >>>> */
> >>>> - ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
> >>>> + ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
> >>>> if (ret)
> >>>> return ret;
> >>>>
> >>>> - ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
> >>>> + ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
> >>>> if (ret)
> >>>> return ret;
> >>>> usleep_range(10000, 15000);
> >>>>
> >>>> - ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
> >>>> + ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
> >>>> if (ret)
> >>>> return ret;
> >>>> usleep_range(10000, 15000);
> >>>> @@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client)
> >>>> if (!dev)
> >>>> return -ENOMEM;
> >>>> dev->dev = &client->dev;
> >>>> -
> >>>> - dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
> >>>> - GFP_KERNEL);
> >>>> - if (!dev->serializer)
> >>>> - return -ENOMEM;
> >>>> -
> >>>> - dev->serializer->client = client;
> >>>> + dev->serializer.client = client;
> >>>>
> >>>> ret = of_property_read_u32_array(client->dev.of_node, "reg",
> >>>> dev->addrs, 2);
> >>>
> >>
>
