[PATCH v5 12/15] media: i2c: rdacm20: Embed 'serializer' field

[Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>]

There's no reason to allocate dynamically the 'serializer' field in
the driver structure.

Embed the field and adjust all its users in the driver.

Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 drivers/media/i2c/rdacm20.c | 36 +++++++++++++++---------------------
 1 file changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
index 5e0314a2b1ca..029af8fd7485 100644
--- a/drivers/media/i2c/rdacm20.c
+++ b/drivers/media/i2c/rdacm20.c
@@ -312,7 +312,7 @@ static const struct ov10635_reg {
 
 struct rdacm20_device {
 	struct device			*dev;
-	struct max9271_device		*serializer;
+	struct max9271_device		serializer;
 	struct i2c_client		*sensor;
 	struct v4l2_subdev		sd;
 	struct media_pad		pad;
@@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct rdacm20_device *dev = sd_to_rdacm20(sd);
 
-	return max9271_set_serial_link(dev->serializer, enable);
+	return max9271_set_serial_link(&dev->serializer, enable);
 }
 
 static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
@@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
 	unsigned int retry = 3;
 	int ret;
 
-	max9271_wake_up(dev->serializer);
+	max9271_wake_up(&dev->serializer);
 
 	/* Serial link disabled during config as it needs a valid pixel clock. */
-	ret = max9271_set_serial_link(dev->serializer, false);
+	ret = max9271_set_serial_link(&dev->serializer, false);
 	if (ret)
 		return ret;
 
@@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
 	 *  Ensure that we have a good link configuration before attempting to
 	 *  identify the device.
 	 */
-	max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
-					       MAX9271_I2CSLVTO_1024US |
-					       MAX9271_I2CMSTBT_105KBPS);
+	max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
+						MAX9271_I2CSLVTO_1024US |
+						MAX9271_I2CMSTBT_105KBPS);
 
-	max9271_configure_gmsl_link(dev->serializer);
+	max9271_configure_gmsl_link(&dev->serializer);
 
-	ret = max9271_verify_id(dev->serializer);
+	ret = max9271_verify_id(&dev->serializer);
 	if (ret < 0)
 		return ret;
 
-	ret = max9271_set_address(dev->serializer, dev->addrs[0]);
+	ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
 	if (ret < 0)
 		return ret;
-	dev->serializer->client->addr = dev->addrs[0];
+	dev->serializer.client->addr = dev->addrs[0];
 
 	/*
 	 * Reset the sensor by cycling the OV10635 reset signal connected to the
 	 * MAX9271 GPIO1 and verify communication with the OV10635.
 	 */
-	ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
+	ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
 	if (ret)
 		return ret;
 
-	ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
+	ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
 	if (ret)
 		return ret;
 	usleep_range(10000, 15000);
 
-	ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
+	ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
 	if (ret)
 		return ret;
 	usleep_range(10000, 15000);
@@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client)
 	if (!dev)
 		return -ENOMEM;
 	dev->dev = &client->dev;
-
-	dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
-				       GFP_KERNEL);
-	if (!dev->serializer)
-		return -ENOMEM;
-
-	dev->serializer->client = client;
+	dev->serializer.client = client;
 
 	ret = of_property_read_u32_array(client->dev.of_node, "reg",
 					 dev->addrs, 2);
-- 
2.31.1