Re: [PATCH v2 06/12] media: hantro: add support for Rockchip RK3066

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ezequiel,

Am 11.06.21 um 17:50 schrieb Ezequiel Garcia:
Hi Alex,

On Thu, 2021-05-27 at 17:44 +0200, Alex Bee wrote:
RK3066's VPU IP block is the predecessor from what RK3288 has.
The hardware differences are:
   - supports decoding frame sizes up to 1920x1088 only
   - doesn't have the 'G1_REG_SOFT_RESET' register
     (requires another .reset callback for hantro_codec_ops,
      since writing this register will result in non-working
      IP block)
   - has one ACLK/HCLK per vdpu/vepu
   - ACLKs can be clocked up to 300 MHz only
Have you tested trying 400 MHz (or more) ?

Yes, I've tried this on both RK3066 and RK3036 variants - everything above  300 MHz results in non-functioning IP block.

See comment in RK3036 devicetree in vendor kernel at [1].

[1] https://github.com/rockchip-linux/kernel/blob/develop-4.4/arch/arm/boot/dts/rk3036.dtsi#L246-L248


   - no MMU
     (no changes required: CMA will be transparently used)

Add a new RK3066 variant which reflect this differences. This variant
can be used for RK3188 as well.

Reviewed-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>

Thanks!
Ezequiel




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux