Add the power controller node and the correspondending qos nodes for
RK3036.
Also add the power-domain property to the nodes that are already
present.
Note: Since the regiser offsets of the axi interconnect QoS are missing
in the TRM (RK3036 TRM V1.0), they have been taken from vendor kernel.
Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
---
Changes in v2:
- moved power-domains property after iommus-property
arch/arm/boot/dts/rk3036.dtsi | 51 +++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 9ccefa8282ba..76ab663eccf7 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3036-cru.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/power/rk3036-power.h>
/ {
#address-cells = <1>;
@@ -111,6 +112,7 @@ gpu: gpu@10090000 {
assigned-clock-rates = <100000000>;
clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
clock-names = "bus", "core";
+ power-domains = <&power RK3036_PD_GPU>;
resets = <&cru SRST_GPU>;
status = "disabled";
};
@@ -124,6 +126,7 @@ vop: vop@10118000 {
resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vop_mmu>;
+ power-domains = <&power RK3036_PD_VIO>;
status = "disabled";
vop_out: port {
@@ -142,10 +145,26 @@ vop_mmu: iommu@10118300 {
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
clock-names = "aclk", "iface";
+ power-domains = <&power RK3036_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
+ qos_gpu: qos@1012d000 {
+ compatible = "rockchip,rk3036-qos", "syscon";
+ reg = <0x1012d000 0x20>;
+ };
+
+ qos_vpu: qos@1012e000 {
+ compatible = "rockchip,rk3036-qos", "syscon";
+ reg = <0x1012e000 0x20>;
+ };
+
+ qos_vio: qos@1012f000 {
+ compatible = "rockchip,rk3036-qos", "syscon";
+ reg = <0x1012f000 0x20>;
+ };
+
gic: interrupt-controller@10139000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -301,6 +320,38 @@ grf: syscon@20008000 {
compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
reg = <0x20008000 0x1000>;
+ power: power-controller {
+ compatible = "rockchip,rk3036-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3036_PD_VIO {
+ reg = <RK3036_PD_VIO>;
+ clocks = <&cru ACLK_LCDC>,
+ <&cru HCLK_LCDC>,
+ <&cru SCLK_LCDC>;
+ pm_qos = <&qos_vio>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3036_PD_VPU {
+ reg = <RK3036_PD_VPU>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3036_PD_GPU {
+ reg = <RK3036_PD_GPU>;
+ clocks = <&cru SCLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
+ };
+
+ };
+
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x1d8>;
--
2.27.0
