On Mon, May 17, 2021 at 8:48 PM Fabio Estevam <festevam@xxxxxxxxx> wrote: > Setting pipeline to PAUSED ... > Pipeline is live and does not need PREROLL ... > Pipeline is PREROLLED ... > Setting pipeline to PLAYING ... > New clock: GstSystemClock > [ 11.745511] imx6-mipi-csi2: LP-11 wait timeout, likely a sensor > driver bug, expect capture failures. > [ 11.754956] imx6-mipi-csi2: phy_state = 0x00000200 > [ 12.259957] imx6-mipi-csi2: clock lane timeout, phy_state = 0x00000200 > [ 12.266630] ipu1_ic_prpvf: upstream stream on failed: -110 > [ 12.274082] ipu1_ic_prpvf: pipeline start failed with -110 > ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed > to allocate required memory. > Additional debug info: > ../sys/v4l2/gstv4l2src.c(659): gst_v4l2src_decide_allocation (): > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: > Buffer pool activation failed > Execution ended after 0:00:01.072478334 > Setting pipeline to NULL ... > Freeing pipeline ... > > Not sure why I am getting LP-11 and clock lane timeouts though. I saw this post: https://ez.analog.com/linux-software-drivers/f/q-a/535279/adv7282-m-dts-how-to-connect-adv-to-ipu1_csi0 and Frieder's patch: https://git.kontron-electronics.de/linux/linux/-/commit/0d90331a44d0f718b7327a94fc72612ddcb4ac0f.patch I applied Frieder's patch, but still getting the same errors below upon launching Gstreamer.: New clock: GstSystemClock [ 11.745511] imx6-mipi-csi2: LP-11 wait timeout, likely a sensor driver bug, expect capture failures. [ 11.754956] imx6-mipi-csi2: phy_state = 0x00000200 [ 12.259957] imx6-mipi-csi2: clock lane timeout, phy_state = 0x00000200 [ 12.266630] ipu1_ic_prpvf: upstream stream on failed: -110 [ 12.274082] ipu1_ic_prpvf: pipeline start failed with -110 Does anyone know what needs to be done to avoid the LP-11 timeout error? Thanks
