Hi Laurent On Fri, Mar 12, 2021 at 12:30 AM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > Hi Ricardo, > > On Thu, Mar 11, 2021 at 11:59:27PM +0100, Ricardo Ribalda Delgado wrote: > > On Thu, Mar 11, 2021 at 11:53 PM Laurent Pinchart wrote: > > > On Thu, Mar 11, 2021 at 11:19:43PM +0100, Ricardo Ribalda wrote: > > > > The device is doing something unspected with the control. Either because > > > > the protocol is not properly implemented or there has been a HW error. > > > > > > > > Fixes v4l2-compliance: > > > > > > > > Control ioctls (Input 0): > > > > fail: v4l2-test-controls.cpp(448): s_ctrl returned an error (22) > > > > test VIDIOC_G/S_CTRL: FAIL > > > > fail: v4l2-test-controls.cpp(698): s_ext_ctrls returned an error (22) > > > > test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL > > > > > > > > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx> > > > > > > The change looks good to me. > > > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > > > > Which of the error codes below do you get with your camera, and for > > > which control ? > > > > Bus 001 Device 003: ID 05c8:03a2 Cheng Uei Precision Industry Co., Ltd > > (Foxlink) XiaoMi USB 2.0 Webcam > > > > info: checking extended control 'White Balance Temperature' (0x0098091a) > > Control error 7 > > info: checking extended control 'Exposure (Absolute)' (0x009a0902) > > Control error 6 > > :-S And what's the request (GET_CUR, GET_INFO, ...) ? Failed to query (SET_CUR) UVC control 10 on unit 2: -32 (exp. 2). Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4) > > > > > --- > > > > drivers/media/usb/uvc/uvc_video.c | 5 +++++ > > > > 1 file changed, 5 insertions(+) > > > > > > > > diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c > > > > index f2f565281e63..25fd8aa23529 100644 > > > > --- a/drivers/media/usb/uvc/uvc_video.c > > > > +++ b/drivers/media/usb/uvc/uvc_video.c > > > > @@ -112,6 +112,11 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit, > > > > case 5: /* Invalid unit */ > > > > case 6: /* Invalid control */ > > > > case 7: /* Invalid Request */ > > > > + /* > > > > + * The firmware has not properly implemented > > > > + * the control or there has been a HW error. > > > > + */ > > > > + return -EIO; > > > > case 8: /* Invalid value within range */ > > > > return -EINVAL; > > > > default: /* reserved or unknown */ > > -- > Regards, > > Laurent Pinchart -- Ricardo Ribalda
