The driver uses v4l2_get_link_freq() helper to obtain the link frequency
using the LINK_FREQ but also the PIXEL_RATE control. The divisor for the
pixel rate derived link frequency was wrong, missing the bus uses double
data rate. Fix this.
Reported-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Fixes: 4b6c129e87a3 ("media: ipu3-cio2: Use v4l2_get_link_freq helper")
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
index 6e8c0c230e11..fecef85bd62e 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
@@ -302,7 +302,7 @@ static int cio2_csi2_calc_timing(struct cio2_device *cio2, struct cio2_queue *q,
if (!q->sensor)
return -ENODEV;
- freq = v4l2_get_link_freq(q->sensor->ctrl_handler, bpp, lanes);
+ freq = v4l2_get_link_freq(q->sensor->ctrl_handler, bpp, lanes * 2);
if (freq < 0) {
dev_err(dev, "error %lld, invalid link_freq\n", freq);
return freq;
--
2.29.2
