Hi Laurent,
On Mon, Feb 15, 2021 at 02:12:23AM +0200, Laurent Pinchart wrote:
> Hi Sakari,
>
> Replying to an old thread.
>
> On Wed, Oct 14, 2020 at 11:30:15AM +0300, Sakari Ailus wrote:
> > Use v4l2_get_link_freq helper and add support for sensor drivers
> > implementing only V4L2_CID_PIXEL_RATE.
> >
> > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > ---
> > since v1:
> >
> > - Use %lld for printing long long int
> >
> > - Remove r (unused variable)
> >
> > drivers/media/pci/intel/ipu3/ipu3-cio2.c | 34 +++++++++---------------
> > 1 file changed, 12 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
> > index c557d189200b..d060cfe473d8 100644
> > --- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c
> > +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
> > @@ -33,6 +33,7 @@ struct ipu3_cio2_fmt {
> > u32 mbus_code;
> > u32 fourcc;
> > u8 mipicode;
> > + u8 bpp;
> > };
> >
> > /*
> > @@ -46,18 +47,22 @@ static const struct ipu3_cio2_fmt formats[] = {
> > .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
> > .fourcc = V4L2_PIX_FMT_IPU3_SGRBG10,
> > .mipicode = 0x2b,
> > + .bpp = 10,
> > }, {
> > .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
> > .fourcc = V4L2_PIX_FMT_IPU3_SGBRG10,
> > .mipicode = 0x2b,
> > + .bpp = 10,
> > }, {
> > .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
> > .fourcc = V4L2_PIX_FMT_IPU3_SBGGR10,
> > .mipicode = 0x2b,
> > + .bpp = 10,
> > }, {
> > .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
> > .fourcc = V4L2_PIX_FMT_IPU3_SRGGB10,
> > .mipicode = 0x2b,
> > + .bpp = 10,
> > },
> > };
> >
> > @@ -288,35 +293,20 @@ static s32 cio2_rx_timing(s32 a, s32 b, s64 freq, int def)
> >
> > /* Calculate the the delay value for termination enable of clock lane HS Rx */
> > static int cio2_csi2_calc_timing(struct cio2_device *cio2, struct cio2_queue *q,
> > - struct cio2_csi2_timing *timing)
> > + struct cio2_csi2_timing *timing,
> > + unsigned int bpp, unsigned int lanes)
> > {
> > struct device *dev = &cio2->pci_dev->dev;
> > - struct v4l2_querymenu qm = { .id = V4L2_CID_LINK_FREQ };
> > - struct v4l2_ctrl *link_freq;
> > s64 freq;
> > - int r;
> >
> > if (!q->sensor)
> > return -ENODEV;
> >
> > - link_freq = v4l2_ctrl_find(q->sensor->ctrl_handler, V4L2_CID_LINK_FREQ);
> > - if (!link_freq) {
> > - dev_err(dev, "failed to find LINK_FREQ\n");
> > - return -EPIPE;
> > - }
> > -
> > - qm.index = v4l2_ctrl_g_ctrl(link_freq);
> > - r = v4l2_querymenu(q->sensor->ctrl_handler, &qm);
> > - if (r) {
> > - dev_err(dev, "failed to get menu item\n");
> > - return r;
> > - }
> > -
> > - if (!qm.value) {
> > - dev_err(dev, "error invalid link_freq\n");
> > - return -EINVAL;
> > + freq = v4l2_get_link_rate(q->sensor->ctrl_handler, bpp, lanes);
>
> Shouldn't this use lanes * 2 ?
Yes, it should. Good catch!
I'll send a patch...
>
> > + if (freq < 0) {
> > + dev_err(dev, "error %lld, invalid link_freq\n", freq);
> > + return freq;
> > }
> > - freq = qm.value;
> >
> > timing->clk_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A,
> > CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B,
> > @@ -364,7 +354,7 @@ static int cio2_hw_init(struct cio2_device *cio2, struct cio2_queue *q)
> >
> > lanes = q->csi2.lanes;
> >
> > - r = cio2_csi2_calc_timing(cio2, q, &timing);
> > + r = cio2_csi2_calc_timing(cio2, q, &timing, fmt->bpp, lanes);
> > if (r)
> > return r;
> >
>
> --
> Regards,
>
> Laurent Pinchart
--
Sakari Ailus
