On Sat, Jan 2, 2021 at 9:55 AM Steve Longerbeam <slongerbeam@xxxxxxxxx> wrote: > > Hi Tim, > > I gave this a shot a while ago, but I recall struggling with some > locking problems. I haven't been able to return to it. I've updated the > imx/add-fim-to-prpencvf branch to latest media-tree master branch > (5.11.0-rc1), in my github fork [1]. The patches against master are: > > 0001-media-imx.rst-update-doc-to-reflect-FIM-changes.patch > 0002-media-imx-prpencvf-attach-FIM.patch > 0003-WIP.patch > > The last patch was my first attempts to debug the locking problems. > > I don't have access to imx6 hardware any longer, so I can't progress any > further on it at this point. > > Steve > > [1] git@xxxxxxxxxx:slongerbeam/mediatree.git Steve, Thanks for the patches! I have found via experimentation that if you are using the VDIC to de-interlace and you loose/regain the signal to the adv7180 it will roll endlesslessly. However if you are doing raw capture the video will sync up within a few seconds (240 lines * 16.6ms-per-frame = 3.8secs max I suspect). Thus the simplest solution for users who suffer from this may just be to capture raw and upscale. Best regards, Tim
