Am Mittwoch, den 21.04.2010, 13:22 -0300 schrieb Donald Bailey: > I've got a couple of boxes that have two no-name 8-chip SAA713X cards. > Both have the same issue: the kernel will only set up the first eight on > one board and only two on the second. It leaves the other six unusable > with error -23. I am unable to figure out what that means. > > Sample dmesg as follows. More (/proc/ioports, /proc/interrupts, etc) > can be posted if requested. Tried kernels 2.6.18 and 2.6.33.2 on CentOS > 5.4 and Fedora 11 fully updated. The module is loaded as card=0. The > following is output for chips 11 through 16. > > saa7130[10]: subsystem: 1131:0000, board: UNKNOWN/GENERIC > [card=0,autodetected] > saa7130[10]: board init: gpio is 10000 > saa7130[10]: Huh, no eeprom present (err=-5)? > saa7130[10]: can't register video device > saa7134: probe of 0000:05:0f.0 failed with error -23 > Due to some unknown bug we have ;), it likely works only perfectly with unidentified devices with more than 128 saa713x chips in a single PCI slot. Read on the wiki, about how to add a new device, and feel free to improve it. China is going totally mad. (or is it from somewhere else?) Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
