Issue loading SAA7134 module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I've got a couple of boxes that have two no-name 8-chip SAA713X cards. Both have the same issue: the kernel will only set up the first eight on one board and only two on the second. It leaves the other six unusable with error -23. I am unable to figure out what that means.

Sample dmesg as follows. More (/proc/ioports, /proc/interrupts, etc) can be posted if requested. Tried kernels 2.6.18 and 2.6.33.2 on CentOS 5.4 and Fedora 11 fully updated. The module is loaded as card=0. The following is output for chips 11 through 16.

saa7130[10]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7130[10]: board init: gpio is 10000
saa7130[10]: Huh, no eeprom present (err=-5)?
saa7130[10]: can't register video device
saa7134: probe of 0000:05:0f.0 failed with error -23

Thanks in advance,

Donald Bailey
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux