On 18/04/2010 08:19, william wrote:
Hello Paul, I know what is happening but i have no solution. The message: dw2102: query RC enter is a message from the ir receiver in the device. I noticed by accident that when you push some buttons on the remote (which came with the tevii box) while tailing the log file you will see the buttons on the remote. i'm not sure because my device did not work at all so i send it back to my supplier but i think the lib-s2planin drivers could fix it but i had no chance to test it myself. If you are going to try the s2planin drivers please let me know how it works! With kind regards William
I also discovered that RC is remote control. Tried the v4l-dvb in various combos which looked promising for a period but usually ended up with either the s660 or my nova dvb-t usb flooding the system and rendering the usb keyboard unsable. Tried increasing the query time on the RC which seemed to help but still had problems.
Then tried s2-liplianin code at your suggestion which looked promising but it was strangely requesting a 2nd upload dvb-fe-ds3000.fw which although present in /lib/firmware didn't occur. Later it crashed:
Apr 18 23:23:12 antec300 kernel: [ 324.866653] usb 1-1: new high speed USB device using ehci_hcd and address 4 Apr 18 23:23:12 antec300 kernel: [ 325.458058] usb 1-1: new high speed USB device using ehci_hcd and address 5 Apr 18 23:23:12 antec300 kernel: [ 325.590133] usb 1-1: configuration #1 chosen from 1 choice Apr 18 23:23:12 antec300 kernel: [ 325.590330] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 18 23:23:12 antec300 kernel: [ 325.590339] usb 1-1: firmware: requesting dvb-usb-s660.fw Apr 18 23:23:12 antec300 kernel: [ 325.595031] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' Apr 18 23:23:12 antec300 kernel: [ 325.595037] dw2102: start downloading DW210X firmware Apr 18 23:23:12 antec300 kernel: [ 325.713426] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 18 23:23:12 antec300 kernel: [ 325.713479] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 18 23:23:12 antec300 kernel: [ 325.717592] DVB: registering new adapter (TeVii S660 USB) Apr 18 23:23:18 antec300 kernel: [ 331.716487] dvb-usb: MAC address: 00:00:a0:00:00:00 Apr 18 23:23:18 antec300 kernel: [ 331.780801] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input7 Apr 18 23:23:18 antec300 kernel: [ 331.780862] dvb-usb: schedule remote query interval to 150 msecs. Apr 18 23:23:18 antec300 kernel: [ 331.780866] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 18 23:23:18 antec300 kernel: [ 331.780905] usb 1-1: USB disconnect, address 5 Apr 18 23:23:18 antec300 kernel: [ 331.813419] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected. Apr 18 23:23:19 antec300 kernel: [ 332.051995] usb 1-1: new high speed USB device using ehci_hcd and address 6 Apr 18 23:23:19 antec300 kernel: [ 332.184522] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2 Apr 18 23:23:19 antec300 kernel: [ 332.185114] usb 1-1: configuration #1 chosen from 1 choice Apr 18 23:23:19 antec300 kernel: [ 332.185298] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 18 23:23:19 antec300 kernel: [ 332.185304] usb 1-1: firmware: requesting dvb-usb-s660.fw Apr 18 23:23:19 antec300 kernel: [ 332.190277] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' Apr 18 23:23:19 antec300 kernel: [ 332.190282] dw2102: start downloading DW210X firmware Apr 18 23:23:19 antec300 kernel: [ 332.307623] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 18 23:23:19 antec300 kernel: [ 332.307676] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 18 23:23:19 antec300 kernel: [ 332.307818] DVB: registering new adapter (TeVii S660 USB) Apr 18 23:23:23 antec300 kernel: [ 336.413508] dvb-usb: MAC address: 00:18:bd:5c:60:b0 Apr 18 23:23:23 antec300 kernel: [ 336.462191] DS3000 chip version: 0.192 attached. Apr 18 23:23:23 antec300 kernel: [ 336.462195] dw2102: Attached ds3000+ds2020! Apr 18 23:23:23 antec300 kernel: [ 336.462197] Apr 18 23:23:23 antec300 kernel: [ 336.462202] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)... Apr 18 23:23:23 antec300 kernel: [ 336.463198] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input8 Apr 18 23:23:23 antec300 kernel: [ 336.463244] dvb-usb: schedule remote query interval to 150 msecs. Apr 18 23:23:23 antec300 kernel: [ 336.463250] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 18 23:24:00 antec300 kernel: [ 373.534616] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)... Apr 18 23:24:00 antec300 kernel: [ 373.534625] usb 1-1: firmware: requesting dvb-fe-ds3000.fw Apr 18 23:24:00 antec300 kernel: [ 373.568629] ds3000_firmware_ondemand: Waiting for firmware upload(2)... Apr 19 07:42:02 antec300 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="979" x-info="http://www.rsyslog.com";] rsyslogd was HUPed, type 'lightweight'. Apr 19 07:42:02 antec300 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="979" x-info="http://www.rsyslog.com";] rsyslogd was HUPed, type 'lightweight'. Apr 19 13:58:51 antec300 kernel: [52785.475150] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)... Apr 19 13:58:51 antec300 kernel: [52785.475159] usb 1-1: firmware: requesting dvb-fe-ds3000.fw Apr 19 13:58:51 antec300 kernel: [52785.479716] ds3000_firmware_ondemand: Waiting for firmware upload(2)... Apr 19 17:46:30 antec300 kernel: [66424.255594] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)... Apr 19 17:46:30 antec300 kernel: [66424.255602] usb 1-1: firmware: requesting dvb-fe-ds3000.fw Apr 19 17:46:30 antec300 kernel: [66424.260652] ds3000_firmware_ondemand: Waiting for firmware upload(2)... Apr 19 19:06:34 antec300 kernel: [71220.731748] usb 1-1: USB disconnect, address 6 Apr 19 19:09:44 antec300 kernel: [71410.033797] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected. Apr 19 19:10:23 antec300 kernel: [71448.827499] usb 1-2: USB disconnect, address 2 Apr 19 19:13:47 antec300 kernel: [71652.872116] khubd D c08185c0 0 40 2 0x00000000 Apr 19 19:13:47 antec300 kernel: [71652.872126] f71a9da8 00000046 f2d58000 c08185c0 f7194168 c08185c0 85a47f55 000040fb Apr 19 19:13:47 antec300 kernel: [71652.872140] c08185c0 c08185c0 f7194168 c08185c0 00000000 000040fb c08185c0 f2d46300 Apr 19 19:13:47 antec300 kernel: [71652.872153] f7193ed0 f43f5000 f71a9db8 f6b727f4 f71a9dd4 f830d4fd f71a9dbc c03a4552 Apr 19 19:13:47 antec300 kernel: [71652.872166] Call Trace: Apr 19 19:13:47 antec300 kernel: [71652.872195] [<f830d4fd>] dvb_unregister_frontend+0x9d/0xe0 [dvb_core] Apr 19 19:13:47 antec300 kernel: [71652.872207] [<c03a4552>] ? device_unregister+0x12/0x20 Apr 19 19:13:47 antec300 kernel: [71652.872216] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 19 19:13:47 antec300 kernel: [71652.872229] [<f80eb095>] dvb_usb_adapter_frontend_exit+0x15/0x30 [dvb_usb] Apr 19 19:13:47 antec300 kernel: [71652.872240] [<f80ea485>] dvb_usb_exit+0x45/0xf0 [dvb_usb] Apr 19 19:13:47 antec300 kernel: [71652.872249] [<c0572da4>] ? mutex_lock+0x14/0x40 Apr 19 19:13:47 antec300 kernel: [71652.872260] [<f80ea55d>] dvb_usb_device_exit+0x2d/0x50 [dvb_usb] Apr 19 19:13:47 antec300 kernel: [71652.872272] [<c0418ab9>] usb_unbind_interface+0xe9/0x120 Apr 19 19:13:47 antec300 kernel: [71652.872280] [<c03a691e>] __device_release_driver+0x3e/0x90 Apr 19 19:13:47 antec300 kernel: [71652.872287] [<c03a6a30>] device_release_driver+0x20/0x40 Apr 19 19:13:47 antec300 kernel: [71652.872295] [<c03a5d73>] bus_remove_device+0x73/0x90 Apr 19 19:13:47 antec300 kernel: [71652.872302] [<c03a44df>] device_del+0xef/0x150 Apr 19 19:13:47 antec300 kernel: [71652.872310] [<c041596d>] usb_disable_device+0x7d/0xf0 Apr 19 19:13:47 antec300 kernel: [71652.872328] [<c04105be>] usb_disconnect+0x9e/0x110 Apr 19 19:13:47 antec300 kernel: [71652.872336] [<c0410973>] hub_port_connect_change+0x83/0x830 Apr 19 19:13:47 antec300 kernel: [71652.872344] [<c0416640>] ? usb_control_msg+0xd0/0x120 Apr 19 19:13:47 antec300 kernel: [71652.872352] [<c040e7bb>] ? clear_port_feature+0x4b/0x60 Apr 19 19:13:47 antec300 kernel: [71652.872359] [<c04121d5>] hub_events+0x1f5/0x500 Apr 19 19:13:47 antec300 kernel: [71652.872366] [<c057209c>] ? schedule+0x40c/0x730 Apr 19 19:13:47 antec300 kernel: [71652.872373] [<c015c2da>] ? finish_wait+0x4a/0x70 Apr 19 19:13:47 antec300 kernel: [71652.872380] [<c04124e0>] ? hub_thread+0x0/0x150 Apr 19 19:13:47 antec300 kernel: [71652.872387] [<c0412515>] hub_thread+0x35/0x150 Apr 19 19:13:47 antec300 kernel: [71652.872394] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 19 19:13:47 antec300 kernel: [71652.872402] [<c015be8c>] kthread+0x7c/0x90 Apr 19 19:13:47 antec300 kernel: [71652.872408] [<c015be10>] ? kthread+0x0/0x90 Apr 19 19:13:47 antec300 kernel: [71652.872417] [<c0104047>] kernel_thread_helper+0x7/0x10 Apr 19 19:15:47 antec300 kernel: [71772.692034] khubd D c08185c0 0 40 2 0x00000000
Not even really sure whether it's the h/w, the firmware, the linux code or a combination; may even be an interaction with my existing nova usb device. Also don't know whether others have a working Ubuntu+S660 combination.
I've wasted too many evenings on this and decided that the S660 on my pc is unlikely to be workable in the near term so have bought a Nova-HD-S2 PCI card. I'll probably have another go later perhaps on another pc.
paul -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
