Hello Paul,
I know what is happening but i have no solution.
The message: dw2102: query RC enter
is a message from the ir receiver in the device.
I noticed by accident that when you push some buttons on the remote
(which came with the tevii box) while tailing the log file you will see
the buttons on the remote.
i'm not sure because my device did not work at all so i send it back to
my supplier but i think the lib-s2planin drivers could fix it but i had
no chance to test it myself.
If you are going to try the s2planin drivers please let me know how it
works!
With kind regards
William
On 04/16/2010 07:43 PM, Paul Shepherd wrote:
Josu,
mythtv version 0.22-fixes [22594] however I don't think it's mythtv
problem but an interaction somewhere between the S660 h/w, firmware
and the kernel (vl4-dvb etc)
paul
On 16/04/2010 10:34, Josu Lazkano wrote:
Which version of mythtv are you using?
Josu Lazkano
El 16/04/2010 10:58, "Paul Shepherd" <paul@xxxxxxxxxxxxxxxxx
<mailto:paul@xxxxxxxxxxxxxxxxx>> escribió:
I have a Tevii S660 (a usb dvb-s2 device) which is causing a problem.
After the S660 is attached to a USB 2 socket, the firmware is d/l and
everything looks fine but then there are continual RC (check/debug?)
messages every 150 ms, then some time later everything goes pear
shaped:
Apr 9 22:15:49 antec300 kernel: [ 16.801141] EXT3 FS on sdd1,
internal journal
Apr 9 22:15:49 antec300 kernel: [ 16.801144] EXT3-fs: mounted
filesystem with writeback data mode.
Apr 9 22:15:49 antec300 kernel: [ 17.490262] hda-intel: Codec
#3 probe error; disabling it...
Apr 9 22:15:50 antec300 kernel: [ 17.568264] hda_codec: Unknown
model for ALC889, trying auto-probe from BIOS...
Apr 9 22:15:50 antec300 kernel: [ 17.568513] input: HDA Digital
PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
Apr 9 22:15:55 antec300 kernel: [ 22.697708] __ratelimit: 24
callbacks suppressed
Apr 9 22:15:55 antec300 kernel: [ 22.697711] type=1503
audit(1270847755.406:33): operation="open" pid=2328 parent=1870
profile="/usr/sbin/mysqld" requested_mask="::r" denied_mask="::r"
fsuid=119 ouid=0 name="/sys/devices/system/cpu/"
.
# plug the S660 in ...
.
Apr 9 22:24:52 antec300 kernel: [ 559.078860] usb 1-1: new high
speed USB device using ehci_hcd and address 7
Apr 9 22:24:52 antec300 kernel: [ 559.211222] usb 1-1:
configuration #1 chosen from 1 choice
Apr 9 22:24:52 antec300 kernel: [ 559.211390] dvb-usb: found a
'TeVii S660 USB' in cold state, will try to load a firmware
Apr 9 22:24:52 antec300 kernel: [ 559.211396] usb 1-1: firmware:
requesting dvb-usb-teviis660.fw
Apr 9 22:24:52 antec300 kernel: [ 559.224426] dvb-usb:
downloading firmware from file 'dvb-usb-teviis660.fw'
Apr 9 22:24:52 antec300 kernel: [ 559.224431] dw2102: start
downloading DW210X firmware
Apr 9 22:24:52 antec300 kernel: [ 559.342492] dvb-usb: found a
'TeVii S660 USB' in warm state.
Apr 9 22:24:52 antec300 kernel: [ 559.342561] dvb-usb: will pass
the complete MPEG2 transport stream to the software demuxer.
Apr 9 22:24:52 antec300 kernel: [ 559.346560] DVB: registering
new adapter (TeVii S660 USB)
Apr 9 22:24:58 antec300 kernel: [ 565.369380] dvb-usb: MAC
address: d0:d0:d0:d0:d0:d0
Apr 9 22:24:58 antec300 kernel: [ 565.394061] Only Zarlink
VP310/MT312/ZL10313 are supported chips.
Apr 9 22:24:59 antec300 kernel: [ 565.665303] input: IR-receiver
inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input11
Apr 9 22:24:59 antec300 kernel: [ 565.665361] dvb-usb: schedule
remote query interval to 150 msecs.
Apr 9 22:24:59 antec300 kernel: [ 565.665366] dvb-usb: TeVii
S660 USB successfully initialized and connected.
Apr 9 22:24:59 antec300 kernel: [ 565.665817] usb 1-1: USB
disconnect, address 7
Apr 9 22:24:59 antec300 kernel: [ 565.693209] dvb-usb: TeVii
S660 USB successfully deinitialized and disconnected.
Apr 9 22:24:59 antec300 kernel: [ 565.932522] usb 1-1: new high
speed USB device using ehci_hcd and address 8
Apr 9 22:24:59 antec300 kernel: [ 566.064970] usb 1-1: config 1
interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
Apr 9 22:24:59 antec300 kernel: [ 566.065590] usb 1-1:
configuration #1 chosen from 1 choice
Apr 9 22:24:59 antec300 kernel: [ 566.066164] dvb-usb: found a
'TeVii S660 USB' in cold state, will try to load a firmware
Apr 9 22:24:59 antec300 kernel: [ 566.066171] usb 1-1: firmware:
requesting dvb-usb-teviis660.fw
Apr 9 22:24:59 antec300 kernel: [ 566.072788] dvb-usb:
downloading firmware from file 'dvb-usb-teviis660.fw'
Apr 9 22:24:59 antec300 kernel: [ 566.072792] dw2102: start
downloading DW210X firmware
Apr 9 22:24:59 antec300 kernel: [ 566.192150] dvb-usb: found a
'TeVii S660 USB' in warm state.
Apr 9 22:24:59 antec300 kernel: [ 566.192213] dvb-usb: will pass
the complete MPEG2 transport stream to the software demuxer.
Apr 9 22:24:59 antec300 kernel: [ 566.192644] DVB: registering
new adapter (TeVii S660 USB)
Apr 9 22:25:03 antec300 kernel: [ 570.298170] dvb-usb: MAC
address: 00:18:bd:5c:60:b0
Apr 9 22:25:03 antec300 kernel: [ 570.314148] Only Zarlink
VP310/MT312/ZL10313 are supported chips.
Apr 9 22:25:04 antec300 kernel: [ 570.589497] DS3000 chip
version: 0.192 attached.
Apr 9 22:25:04 antec300 kernel: [ 570.589501] dw2102: Attached
ds3000+ds2020!
Apr 9 22:25:04 antec300 kernel: [ 570.589503]
Apr 9 22:25:04 antec300 kernel: [ 570.589707] DVB: registering
adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
Apr 9 22:25:04 antec300 kernel: [ 570.590909] input: IR-receiver
inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input12
Apr 9 22:25:04 antec300 kernel: [ 570.590965] dvb-usb: schedule
remote query interval to 150 msecs.
Apr 9 22:25:04 antec300 kernel: [ 570.590971] dvb-usb: TeVii
S660 USB successfully initialized and connected.
Apr 9 22:25:04 antec300 kernel: [ 570.741992] dw2102: query RC
enter
Apr 9 22:25:04 antec300 kernel: [ 570.741996] dw2102: query RC
start
Apr 9 22:25:04 antec300 kernel: [ 570.761941] dw2102: query RC
end
Apr 9 22:25:04 antec300 kernel: [ 570.912988] dw2102: query RC
enter
Apr 9 22:25:04 antec300 kernel: [ 570.912993] dw2102: query RC
start
Apr 9 22:25:04 antec300 kernel: [ 570.920950] dw2102: query RC
end
Apr 9 22:25:04 antec300 kernel: [ 571.072756] dw2102: query RC
enter
Apr 9 22:25:04 antec300 kernel: [ 571.072761] dw2102: query RC
start
Apr 9 22:25:04 antec300 kernel: [ 571.080742] dw2102: query RC
end
Apr 9 22:25:04 antec300 kernel: [ 571.232512] dw2102: query RC
enter
Apr 9 22:25:04 antec300 kernel: [ 571.232517] dw2102: query RC
start
Apr 9 22:25:04 antec300 kernel: [ 571.240503] dw2102: query RC
end
Apr 9 22:25:04 antec300 kernel: [ 571.393004] dw2102: query RC
enter
Apr 9 22:25:04 antec300 kernel: [ 571.393009] dw2102: query RC
start
Apr 9 22:25:04 antec300 kernel: [ 571.400998] dw2102: query RC
end
Apr 9 22:25:05 antec300 kernel: [ 571.552774] dw2102: query RC
enter
Apr 9 22:25:05 antec300 kernel: [ 571.552778] dw2102: query RC
start
Apr 9 22:25:05 antec300 kernel: [ 571.560764] dw2102: query RC
end
Apr 9 22:25:05 antec300 kernel: [ 571.711791] dw2102: query RC
enter
Apr 9 22:25:05 antec300 kernel: [ 571.711796] dw2102: query RC
start
Apr 9 22:25:05 antec300 kernel: [ 571.719776] dw2102: query RC
end
Apr 9 22:25:05 antec300 kernel: [ 571.871529] dw2102: query RC
enter
Apr 9 22:25:05 antec300 kernel: [ 571.871535] dw2102: query RC
start
Apr 9 22:25:05 antec300 kernel: [ 571.879506] dw2102: query RC
end
Apr 9 22:25:05 antec300 kernel: [ 572.031296] dw2102: query RC
enter
Apr 9 22:25:05 antec300 kernel: [ 572.031301] dw2102: query RC
start
Apr 9 22:25:05 antec300 kernel: [ 572.039283] dw2102: query RC
end
Apr 9 22:25:05 antec300 kernel: [ 572.191370] dw2102: query RC
enter
Apr 9 22:25:05 antec300 kernel: [ 572.191374] dw2102: query RC
start
Apr 9 22:25:05 antec300 kernel: [ 572.199064] dw2102: query RC
end
Apr 9 22:25:05 antec300 kernel: [ 572.351564] dw2102: query RC
enter
Apr 9 22:25:05 antec300 kernel: [ 572.351569] dw2102: query RC
start
Apr 9 22:25:05 antec300 kernel: [ 572.359550] dw2102: query RC
end
Apr 9 22:25:06 antec300 kernel: [ 572.510583] dw2102: query RC
enter
Apr 9 22:25:06 antec300 kernel: [ 572.510587] dw2102: query RC
start
Apr 9 22:25:06 antec300 kernel: [ 572.518557] dw2102: query RC
end
Apr 9 22:25:06 antec300 kernel: [ 572.670334] dw2102: query RC
enter
Apr 9 22:25:06 antec300 kernel: [ 572.670339] dw2102: query RC
start
Apr 9 22:25:06 antec300 kernel: [ 572.679070] dw2102: query RC
end
Apr 9 22:25:06 antec300 kernel: [ 572.830080] dw2102: query RC
enter
Apr 9 22:25:06 antec300 kernel: [ 572.830084] dw2102: query RC
start
Apr 9 22:25:06 antec300 kernel: [ 572.838076] dw2102: query RC
end
.
# 15 hrs later ...
.
Apr 10 13:01:27 antec300 kernel: [53074.896764] dw2102: query RC
enter
Apr 10 13:01:27 antec300 kernel: [53074.896768] dw2102: query RC
start
Apr 10 13:01:27 antec300 kernel: [53074.904732] dw2102: query RC
end
Apr 10 13:01:27 antec300 kernel: [53075.055779] dw2102: query RC
enter
Apr 10 13:01:27 antec300 kernel: [53075.055784] dw2102: query RC
start
Apr 10 13:01:27 antec300 kernel: [53075.064511] dw2102: query RC
end
Apr 10 13:01:27 antec300 kernel: [53075.215544] dw2102: query RC
enter
Apr 10 13:01:27 antec300 kernel: [53075.215550] dw2102: query RC
start
Apr 10 13:01:27 antec300 kernel: [53075.224272] dw2102: query RC
end
Apr 10 13:01:27 antec300 kernel: [53075.375283] dw2102: query RC
enter
Apr 10 13:01:27 antec300 kernel: [53075.375288] dw2102: query RC
start
Apr 10 13:01:27 antec300 kernel: [53075.400123] usb 1-1: USB
disconnect, address 8
Apr 10 13:01:27 antec300 kernel: [53075.407986] dw2102:
dw2102_rc_query: unknown rc key: f7, ec
Apr 10 13:01:27 antec300 kernel: [53075.407988]
Apr 10 13:01:27 antec300 kernel: [53075.407990] dw2102: query RC
end
Apr 10 13:03:33 antec300 kernel: [53200.638775] khubd D
c08185c0 0 40 2 0x00000000
Apr 10 13:03:33 antec300 kernel: [53200.638782] f71a9da8 00000046
f7193ed0 c08185c0 f7194168 c08185c0 96b72f6a 00003045
Apr 10 13:03:33 antec300 kernel: [53200.638792] c08185c0 c08185c0
f7194168 c08185c0 96b724c4 00003045 c08185c0 f6b19880
Apr 10 13:03:33 antec300 kernel: [53200.638800] f7193ed0 f1ed7000
f71a9db8 f1f867f4 f71a9dd4 f822b50d f71a9dbc c03a4552
Apr 10 13:03:33 antec300 kernel: [53200.638809] Call Trace:
Apr 10 13:03:33 antec300 kernel: [53200.638836] [<f822b50d>]
dvb_unregister_frontend+0x9d/0xe0 [dvb_core]
Apr 10 13:03:33 antec300 kernel: [53200.638845] [<c03a4552>] ?
device_unregister+0x12/0x20
Apr 10 13:03:33 antec300 kernel: [53200.638852] [<c015c180>] ?
autoremove_wake_function+0x0/0x40
Apr 10 13:03:33 antec300 kernel: [53200.638862] [<f8145095>]
dvb_usb_adapter_frontend_exit+0x15/0x30 [dvb_usb]
Apr 10 13:03:33 antec300 kernel: [53200.638870] [<f8144485>]
dvb_usb_exit+0x45/0xf0 [dvb_usb]
Apr 10 13:03:33 antec300 kernel: [53200.638876] [<c0572da4>] ?
mutex_lock+0x14/0x40
Apr 10 13:03:33 antec300 kernel: [53200.638883] [<f814455d>]
dvb_usb_device_exit+0x2d/0x50 [dvb_usb]
Apr 10 13:03:33 antec300 kernel: [53200.638892] [<c0418ab9>]
usb_unbind_interface+0xe9/0x120
Apr 10 13:03:33 antec300 kernel: [53200.638897] [<c03a691e>]
__device_release_driver+0x3e/0x90
Apr 10 13:03:33 antec300 kernel: [53200.638902] [<c03a6a30>]
device_release_driver+0x20/0x40
Apr 10 13:03:33 antec300 kernel: [53200.638908] [<c03a5d73>]
bus_remove_device+0x73/0x90
Apr 10 13:03:33 antec300 kernel: [53200.638912] [<c03a44df>]
device_del+0xef/0x150
Apr 10 13:03:33 antec300 kernel: [53200.638917] [<c041596d>]
usb_disable_device+0x7d/0xf0
Apr 10 13:03:33 antec300 kernel: [53200.638922] [<c04105be>]
usb_disconnect+0x9e/0x110
Apr 10 13:03:33 antec300 kernel: [53200.638927] [<c0410973>]
hub_port_connect_change+0x83/0x830
Apr 10 13:03:33 antec300 kernel: [53200.638932] [<c0416640>] ?
usb_control_msg+0xd0/0x120
Apr 10 13:03:33 antec300 kernel: [53200.638937] [<c040e7bb>] ?
clear_port_feature+0x4b/0x60
Apr 10 13:03:33 antec300 kernel: [53200.638942] [<c04121d5>]
hub_events+0x1f5/0x500
Apr 10 13:03:33 antec300 kernel: [53200.638946] [<c057209c>] ?
schedule+0x40c/0x730
Apr 10 13:03:33 antec300 kernel: [53200.638952] [<c015c2da>] ?
finish_wait+0x4a/0x70
Apr 10 13:03:33 antec300 kernel: [53200.638956] [<c04124e0>] ?
hub_thread+0x0/0x150
Apr 10 13:03:33 antec300 kernel: [53200.638960] [<c0412515>]
hub_thread+0x35/0x150
Apr 10 13:03:33 antec300 kernel: [53200.638965] [<c015c180>] ?
autoremove_wake_function+0x0/0x40
Apr 10 13:03:33 antec300 kernel: [53200.638970] [<c015be8c>]
kthread+0x7c/0x90
Apr 10 13:03:33 antec300 kernel: [53200.638975] [<c015be10>] ?
kthread+0x0/0x90
Apr 10 13:03:33 antec300 kernel: [53200.638981] [<c0104047>]
kernel_thread_helper+0x7/0x10
Tevii say the h/w is ok as it works with a Windows box with their
myTevii application. It does work while the RC messages are occurring,
I can watch and record SD+HD content in mythtv until the crash.
I have tried the latest tevii beta s/w (v4l and .fw files) and also the
v4l-dvb drivers from linuxtv dated 6 april - the same result each time.
I can see in the dw2102.c where 150ms is defined and this seems the
same as other devices in the code.
Google indicates others have seen similar problems but it's not clear
what the solution is.
Three questions:
1) are the RC messages caused by a h/w or s/w issue?
2) if it's s/w what do I need to do?
3) is the subsequent khubd crash related and how do I fix that?
I have a nova dvb-t usb box connected and that works fine - I assume
there's no interaction.
I am running Ubuntu 9.10 with the following kernel:
Linux antec300.home.org <http://antec300.home.org> 2.6.31-20-generic
#57-Ubuntu SMP Mon Feb 8
09:05:19 UTC 2010 i686 GNU/Linux
thanks for any suggestions, paul
--
To unsubscribe from this list: send the line "unsubscribe
linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
<mailto:majordomo@xxxxxxxxxxxxxxx>
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
