RE: [PATCH] media: rc: gpio-ir-recv: add QoS support for cpuidle system

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Sean Young <sean@xxxxxxxx>
> Sent: 2020年9月15日 17:34
> To: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> Cc: mchehab@xxxxxxxxxx; linux-media@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>
> Subject: Re: [PATCH] media: rc: gpio-ir-recv: add QoS support for cpuidle
> system
> 
> 

[...]
> > @@ -92,6 +113,12 @@ static int gpio_ir_recv_probe(struct
> > platform_device *pdev)
> >
> >  	platform_set_drvdata(pdev, gpio_dev);
> >
> > +
> > +	pm_runtime_set_autosuspend_delay(dev, (rcdev->timeout / 1000 /
> > +1000));
> 
> rcdev->timeout is in microseconds (since very recently), so this is wrong.
> Also, the timeout can be changed using the LIRC_SET_REC_TIMEOUT ioctl
> (using ir-ctl -t in userspace). The autosuspend delay should be updated when
> this happens. This can be done by implementing the s_timeout rcdev function.

Hi Sean,

I come across a problem when implementing this feature.

At probe stage, devm_rc_register_device -> change_protocol, then timeout set to 125ms.

When echo sony or nec to protocols, will call change_protocol changing the timeout value, that timeout would change to handler->min_timeout + 10ms. For sony is 16000000ns, for 15625000ns.
This is not the way I want to take before, this would frequently disable/enable cpuidle. So is it necessary to provide s_timeout, this callback should be used to change protocols' timeout?
If implement s_timeout, users need change the timeout value from userspace, this is a mandatory operation and unfriendly. And it will affect protocol's timeout.

Autosuspend delay should be fixed value, should be set to gpio device timeout value, which is 125ms.

Best Regards,
Joakim Zhang
> > +	pm_runtime_use_autosuspend(dev);
> > +	pm_runtime_set_suspended(dev);
> > +	pm_runtime_enable(dev);
> > +
> >  	return devm_request_irq(dev, gpio_dev->irq, gpio_ir_recv_irq,
> >  				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> >  				"gpio-ir-recv-irq", gpio_dev);




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux