Hi, Am Freitag, den 26.03.2010, 23:26 -0400 schrieb OurMail: > Hi, > > Was trying to get a firewire port working in Ubuntu 9.10 when I noticed > that I had my USB Tevion DVD Maker plugged in and that you had a message > requesting a copy of the dump for the unidentified DVD Maker. Attached > is that dump as requested. > > Not sure where you are located but a German food store chain operating > in the US under the name Aldi Food Stores has sold these a couple times > that I know of. There are at least two versions although they function > the same. A couple years ago they had them for $40 US. Last fall they > had them for $20. At that price they should have been popular so should > be other Linux users with them. Have seen a few users on the boards > trying to get them going. > > They work well under Windows Vista but have never gotten one to work > under Linux. Have been trying to get away from Windows for video work > but have not been able to get either the this USB device or my Sony > DSR-20 DV/DVCAM firewire deck to work under Linux. > > Am not all that good at Linux and any help you care to provide would be > most welcome. > > Dave just a hint. If Aldi stuff is called Medion as well, you usually find the device at http://www.creatix.de. If it is called Tevion, it can be some AverMedia Kworld or whatever clone. Cheers, Hermann > einfaches Textdokument-Anlage (dmesg-dump-ourmailATkconlineDOTcom) > dave@systemax1:~$ dmesg > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 (Ubuntu 2.6.31-20.58-generic) > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] NSC Geode by NSC > [ 0.000000] Cyrix CyrixInstead > [ 0.000000] Centaur CentaurHauls > [ 0.000000] Transmeta GenuineTMx86 > [ 0.000000] Transmeta TransmetaCPU > [ 0.000000] UMC UMC UMC UMC > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6a0000 (usable) > [ 0.000000] BIOS-e820: 00000000bf6a0000 - 00000000bf6ae000 (ACPI data) > [ 0.000000] BIOS-e820: 00000000bf6ae000 - 00000000bf6f0000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000bf6f0000 - 00000000bf6fe000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > [ 0.000000] DMI present. > [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > [ 0.000000] last_pfn = 0xbf6a0 max_arch_pfn = 0x100000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-CBFFF write-protect > [ 0.000000] CC000-DFFFF uncachable > [ 0.000000] E0000-EFFFF write-through > [ 0.000000] F0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask F80000000 write-back > [ 0.000000] 1 base 080000000 mask FC0000000 write-back > [ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable > [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable > [ 0.000000] 4 disabled > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] Scanning 0 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) > [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 00000000bf6a0000 (usable) > [ 0.000000] modified: 00000000bf6a0000 - 00000000bf6ae000 (ACPI data) > [ 0.000000] modified: 00000000bf6ae000 - 00000000bf6f0000 (ACPI NVS) > [ 0.000000] modified: 00000000bf6f0000 - 00000000bf6fe000 (reserved) > [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) > [ 0.000000] initial memory mapped : 0 - 00c00000 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 > [ 0.000000] Using x86 segment limits to approximate NX protection > [ 0.000000] 0000000000 - 0000400000 page 4k > [ 0.000000] 0000400000 - 0037400000 page 2M > [ 0.000000] 0037400000 - 00377fe000 page 4k > [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 > [ 0.000000] RAMDISK: 378a5000 - 37fef6df > [ 0.000000] Allocated new RAMDISK: 008b2000 - 00ffc6df > [ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fef6de to 008b2000 - 00ffc6de > [ 0.000000] ACPI: RSDP 000f9640 00014 (v00 ACPIAM) > [ 0.000000] ACPI: RSDT bf6a0000 00044 (v01 SYSMAX SYXSUKIT 20090306 MSFT 00000097) > [ 0.000000] ACPI: FACP bf6a0200 00084 (v01 7529MS A7529200 20090306 MSFT 00000097) > [ 0.000000] ACPI: DSDT bf6a05c0 05A56 (v01 A7529 A7529200 00000200 INTL 20051117) > [ 0.000000] ACPI: FACS bf6ae000 00040 > [ 0.000000] ACPI: APIC bf6a0390 0006C (v01 7529MS A7529200 20090306 MSFT 00000097) > [ 0.000000] ACPI: MCFG bf6a0400 0003C (v01 7529MS OEMMCFG 20090306 MSFT 00000097) > [ 0.000000] ACPI: SLIC bf6a0440 00176 (v01 SYSMAX SYXSUKIT 20090306 MSFT 00000097) > [ 0.000000] ACPI: OEMB bf6ae040 00071 (v01 7529MS A7529200 20090306 MSFT 00000097) > [ 0.000000] ACPI: HPET bf6a6020 00038 (v01 7529MS OEMHPET 20090306 MSFT 00000097) > [ 0.000000] ACPI: GSCI bf6ae0c0 02024 (v01 7529MS GMCHSCI 20090306 MSFT 00000097) > [ 0.000000] ACPI: SSDT bf6b05f0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] 2174MB HIGHMEM available. > [ 0.000000] 887MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 377fe000 > [ 0.000000] low ram: 0 - 377fe000 > [ 0.000000] node 0 low ram: 00000000 - 377fe000 > [ 0.000000] node 0 bootmap 00011000 - 00017f00 > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] > [ 0.000000] #3 [0000100000 - 00008ad060] TEXT DATA BSS ==> [0000100000 - 00008ad060] > [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] > [ 0.000000] #5 [00008ae000 - 00008b1191] BRK ==> [00008ae000 - 00008b1191] > [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] > [ 0.000000] #7 [00008b2000 - 0000ffc6df] NEW RAMDISK ==> [00008b2000 - 0000ffc6df] > [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] > [ 0.000000] found SMP MP-table at [c00ff780] ff780 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x000377fe > [ 0.000000] HighMem 0x000377fe -> 0x000bf6a0 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x000bf6a0 > [ 0.000000] On node 0 totalpages: 783919 > [ 0.000000] free_area_init_node: node 0, pgdat c0788900, node_mem_map c1000200 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1744 pages used for memmap > [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 4350 pages used for memmap > [ 0.000000] HighMem zone: 552356 pages, LIFO batch:31 > [ 0.000000] Using APIC driver default > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 > [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 24 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at bf6fe000 (gap: bf6fe000:3f702000) > [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 14 pages at c2800000, static data 35612 bytes > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777793 > [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=862ff519-00d8-4af1-8781-8c0dc43c83eb ro quiet splash > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 > [ 0.000000] allocated 15680320 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups > [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf6a0) > [ 0.000000] Memory: 3078572k/3136128k available (4578k kernel code, 56280k reserved, 2146k data, 540k init, 2226824k highmem) > [ 0.000000] virtual kernel memory layout: > [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) > [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > [ 0.000000] .init : 0xc0792000 - 0xc0819000 ( 540 kB) > [ 0.000000] .data : 0xc0578948 - 0xc0791408 (2146 kB) > [ 0.000000] .text : 0xc0100000 - 0xc0578948 (4578 kB) > [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. > [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] NR_IRQS:2304 nr_irqs:440 > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 2520.620 MHz processor. > [ 0.001343] Console: colour VGA+ 80x25 > [ 0.001346] console [tty0] enabled > [ 0.001477] hpet clockevent registered > [ 0.001479] HPET: 3 timers in total, 0 timers will be used for per-cpu timer > [ 0.001484] Calibrating delay loop (skipped), value calculated using timer frequency.. 5041.24 BogoMIPS (lpj=10082480) > [ 0.001501] Security Framework initialized > [ 0.001519] AppArmor: AppArmor initialized > [ 0.001525] Mount-cache hash table entries: 512 > [ 0.001641] Initializing cgroup subsys ns > [ 0.001645] Initializing cgroup subsys cpuacct > [ 0.001649] Initializing cgroup subsys memory > [ 0.001654] Initializing cgroup subsys freezer > [ 0.001656] Initializing cgroup subsys net_cls > [ 0.001669] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.001671] CPU: L2 cache: 2048K > [ 0.001673] CPU: Physical Processor ID: 0 > [ 0.001674] CPU: Processor Core ID: 0 > [ 0.001678] mce: CPU supports 6 MCE banks > [ 0.001685] CPU0: Thermal monitoring enabled (TM2) > [ 0.001688] using mwait in idle threads. > [ 0.001694] Performance Counters: Core2 events, Intel PMU driver. > [ 0.001700] ... version: 2 > [ 0.001702] ... bit width: 40 > [ 0.001703] ... generic counters: 2 > [ 0.001704] ... value mask: 000000ffffffffff > [ 0.001706] ... max period: 000000007fffffff > [ 0.001707] ... fixed-purpose counters: 3 > [ 0.001709] ... counter mask: 0000000700000003 > [ 0.001715] Checking 'hlt' instruction... OK. > [ 0.018381] ACPI: Core revision 20090521 > [ 0.028350] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.069445] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a > [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 > [ 0.004000] Initializing CPU#1 > [ 0.004000] Calibrating delay using timer specific routine.. 5041.24 BogoMIPS (lpj=10082489) > [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.004000] CPU: L2 cache: 2048K > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 1 > [ 0.004000] mce: CPU supports 6 MCE banks > [ 0.004000] CPU1: Thermal monitoring enabled (TM2) > [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > [ 0.157502] CPU1: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a > [ 0.157515] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.160022] Brought up 2 CPUs > [ 0.160024] Total of 2 processors activated (10082.48 BogoMIPS). > [ 0.160067] CPU0 attaching sched-domain: > [ 0.160069] domain 0: span 0-1 level MC > [ 0.160071] groups: 0 1 > [ 0.160076] CPU1 attaching sched-domain: > [ 0.160077] domain 0: span 0-1 level MC > [ 0.160079] groups: 1 0 > [ 0.160145] Booting paravirtualized kernel on bare hardware > [ 0.160174] regulator: core version 0.5 > [ 0.160174] Time: 22:02:53 Date: 03/26/10 > [ 0.160174] NET: Registered protocol family 16 > [ 0.160174] EISA bus registered > [ 0.160178] ACPI: bus type pci registered > [ 0.160233] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > [ 0.160235] PCI: Not using MMCONFIG. > [ 0.160381] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 > [ 0.160383] PCI: Using configuration type 1 for base access > [ 0.161179] bio: create slab <bio-0> at 0 > [ 0.161179] ACPI: EC: Look up EC in DSDT > [ 0.170234] ACPI: Interpreter enabled > [ 0.170243] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.170261] ACPI: Using IOAPIC for interrupt routing > [ 0.170301] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > [ 0.173399] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > [ 0.173401] PCI: Using MMCONFIG for extended config space > [ 0.179478] ACPI Warning: Incorrect checksum in table [OEMB] - B9, should be B4 20090521 tbutils-246 > [ 0.180273] ACPI: No dock devices found. > [ 0.180526] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.180603] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe980000-0xfe9fffff] > [ 0.180607] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] > [ 0.180612] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] > [ 0.180616] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe800000-0xfe8fffff] > [ 0.180686] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe978000-0xfe97bfff] > [ 0.180724] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.180728] pci 0000:00:1b.0: PME# disabled > [ 0.180782] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.180785] pci 0000:00:1c.0: PME# disabled > [ 0.180839] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.180842] pci 0000:00:1c.1: PME# disabled > [ 0.180888] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f] > [ 0.180932] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] > [ 0.180975] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f] > [ 0.181019] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] > [ 0.181068] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe977c00-0xfe977fff] > [ 0.181115] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.181119] pci 0000:00:1d.7: PME# disabled > [ 0.181228] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO > [ 0.181231] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO > [ 0.181234] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) > [ 0.181237] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017) > [ 0.181240] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff) > [ 0.181278] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] > [ 0.181284] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] > [ 0.181290] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] > [ 0.181296] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] > [ 0.181301] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] > [ 0.181339] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] > [ 0.181345] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] > [ 0.181350] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] > [ 0.181355] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] > [ 0.181360] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] > [ 0.181382] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.181385] pci 0000:00:1f.2: PME# disabled > [ 0.181426] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] > [ 0.181540] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff] > [ 0.181561] pci 0000:02:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff] > [ 0.181583] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] > [ 0.181628] pci 0000:02:00.0: supports D1 D2 > [ 0.181630] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold > [ 0.181634] pci 0000:02:00.0: PME# disabled > [ 0.181684] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] > [ 0.181687] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff] > [ 0.181723] pci 0000:03:01.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff] > [ 0.181766] pci 0000:03:01.0: supports D1 D2 > [ 0.181767] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot > [ 0.181771] pci 0000:03:01.0: PME# disabled > [ 0.181813] pci 0000:00:1e.0: transparent bridge > [ 0.181818] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] > [ 0.181835] pci_bus 0000:00: on NUMA node 0 > [ 0.181838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.181966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > [ 0.182062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > [ 0.182112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] > [ 0.188894] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [ 0.188988] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) > [ 0.189079] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) > [ 0.189169] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) > [ 0.189259] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.189352] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.189444] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.189536] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) > [ 0.189679] SCSI subsystem initialized > [ 0.189695] libata version 3.00 loaded. > [ 0.189695] usbcore: registered new interface driver usbfs > [ 0.189695] usbcore: registered new interface driver hub > [ 0.189695] usbcore: registered new device driver usb > [ 0.189695] ACPI: WMI: Mapper loaded > [ 0.189695] PCI: Using ACPI for IRQ routing > [ 0.200010] Bluetooth: Core ver 2.15 > [ 0.200031] NET: Registered protocol family 31 > [ 0.200031] Bluetooth: HCI device and connection manager initialized > [ 0.200031] Bluetooth: HCI socket layer initialized > [ 0.200031] NetLabel: Initializing > [ 0.200031] NetLabel: domain hash size = 128 > [ 0.200032] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.200058] NetLabel: unlabeled traffic allowed by default > [ 0.200099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.200107] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 0.216012] pnp: PnP ACPI init > [ 0.216027] ACPI: bus type pnp registered > [ 0.219444] pnp: PnP ACPI: found 18 devices > [ 0.219446] ACPI: ACPI bus type pnp unregistered > [ 0.219449] PnPBIOS: Disabled by ACPI PNP > [ 0.219458] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved > [ 0.219465] system 00:07: ioport range 0x4d0-0x4d1 has been reserved > [ 0.219467] system 00:07: ioport range 0x800-0x87f has been reserved > [ 0.219469] system 00:07: ioport range 0x480-0x4bf has been reserved > [ 0.219472] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved > [ 0.219474] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved > [ 0.219476] system 00:07: iomem range 0xfed45000-0xfed89fff has been reserved > [ 0.219481] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved > [ 0.219486] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved > [ 0.219488] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved > [ 0.219493] system 00:0e: ioport range 0xa00-0xadf has been reserved > [ 0.219495] system 00:0e: ioport range 0xae0-0xaef has been reserved > [ 0.219500] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved > [ 0.219504] system 00:11: iomem range 0x0-0x9ffff could not be reserved > [ 0.219507] system 00:11: iomem range 0xc0000-0xcffff could not be reserved > [ 0.219509] system 00:11: iomem range 0xe0000-0xfffff could not be reserved > [ 0.219511] system 00:11: iomem range 0x100000-0xbf6fffff could not be reserved > [ 0.254131] AppArmor: AppArmor Filesystem Enabled > [ 0.254161] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 > [ 0.254163] pci 0000:00:1c.0: IO window: disabled > [ 0.254167] pci 0000:00:1c.0: MEM window: disabled > [ 0.254170] pci 0000:00:1c.0: PREFETCH window: disabled > [ 0.254174] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 > [ 0.254176] pci 0000:00:1c.1: IO window: 0xe000-0xefff > [ 0.254181] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff > [ 0.254184] pci 0000:00:1c.1: PREFETCH window: disabled > [ 0.254188] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 > [ 0.254189] pci 0000:00:1e.0: IO window: disabled > [ 0.254194] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff > [ 0.254197] pci 0000:00:1e.0: PREFETCH window: disabled > [ 0.254207] alloc irq_desc for 16 on node -1 > [ 0.254209] alloc kstat_irqs on node -1 > [ 0.254213] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.254217] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.254223] alloc irq_desc for 17 on node -1 > [ 0.254224] alloc kstat_irqs on node -1 > [ 0.254227] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.254230] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.254235] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.254239] pci_bus 0000:00: resource 0 io: [0x00-0xffff] > [ 0.254241] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] > [ 0.254243] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] > [ 0.254245] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] > [ 0.254248] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] > [ 0.254250] pci_bus 0000:03: resource 3 io: [0x00-0xffff] > [ 0.254252] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] > [ 0.254279] NET: Registered protocol family 2 > [ 0.254357] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.254609] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.255146] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.255388] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.255390] TCP reno registered > [ 0.255450] NET: Registered protocol family 1 > [ 0.255499] Trying to unpack rootfs image as initramfs... > [ 0.408228] Freeing initrd memory: 7465k freed > [ 0.411831] cpufreq-nforce2: No nForce2 chipset. > [ 0.411855] Scanning for low memory corruption every 60 seconds > [ 0.411946] audit: initializing netlink socket (disabled) > [ 0.411962] type=2000 audit(1269640973.407:1): initialized > [ 0.418920] highmem bounce pool size: 64 pages > [ 0.418924] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 0.420085] VFS: Disk quotas dquot_6.5.2 > [ 0.420134] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.420566] fuse init (API version 7.12) > [ 0.420635] msgmni has been set to 1679 > [ 0.420808] alg: No test for stdrng (krng) > [ 0.420819] io scheduler noop registered > [ 0.420821] io scheduler anticipatory registered > [ 0.420822] io scheduler deadline registered > [ 0.420855] io scheduler cfq registered (default) > [ 0.420866] pci 0000:00:02.0: Boot video device > [ 0.421033] alloc irq_desc for 24 on node -1 > [ 0.421035] alloc kstat_irqs on node -1 > [ 0.421045] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X > [ 0.421052] pcieport-driver 0000:00:1c.0: setting latency timer to 64 > [ 0.421150] alloc irq_desc for 25 on node -1 > [ 0.421152] alloc kstat_irqs on node -1 > [ 0.421158] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X > [ 0.421164] pcieport-driver 0000:00:1c.1: setting latency timer to 64 > [ 0.421237] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.421255] Firmware did not grant requested _OSC control > [ 0.421270] Firmware did not grant requested _OSC control > [ 0.421295] Firmware did not grant requested _OSC control > [ 0.421305] Firmware did not grant requested _OSC control > [ 0.421317] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.421428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > [ 0.421431] ACPI: Power Button [PWRF] > [ 0.421478] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > [ 0.421480] ACPI: Power Button [PWRB] > [ 0.422037] ACPI: SSDT bf6b00f0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117) > [ 0.422277] processor LNXCPU:00: registered as cooling_device0 > [ 0.422618] ACPI: SSDT bf6b0370 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117) > [ 0.422844] processor LNXCPU:01: registered as cooling_device1 > [ 0.425133] isapnp: Scanning for PnP cards... > [ 0.501540] Switched to high resolution mode on CPU 1 > [ 0.504001] Switched to high resolution mode on CPU 0 > [ 0.777933] isapnp: No Plug & Play device found > [ 0.778790] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.778885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.779160] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.780077] brd: module loaded > [ 0.780431] loop: module loaded > [ 0.780483] input: Macintosh mouse button emulation as /devices/virtual/input/input2 > [ 0.780566] ata_piix 0000:00:1f.1: version 2.13 > [ 0.780576] alloc irq_desc for 18 on node -1 > [ 0.780577] alloc kstat_irqs on node -1 > [ 0.780582] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > [ 0.780612] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 0.780667] scsi0 : ata_piix > [ 0.780726] scsi1 : ata_piix > [ 0.781668] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 > [ 0.781671] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 > [ 0.781688] alloc irq_desc for 19 on node -1 > [ 0.781690] alloc kstat_irqs on node -1 > [ 0.781694] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > [ 0.781699] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 0.781733] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 0.781772] scsi2 : ata_piix > [ 0.781904] scsi3 : ata_piix > [ 0.783074] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 > [ 0.783076] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 > [ 0.783725] Fixed MDIO Bus: probed > [ 0.783751] PPP generic driver version 2.4.2 > [ 0.783814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.783828] alloc irq_desc for 23 on node -1 > [ 0.783830] alloc kstat_irqs on node -1 > [ 0.783833] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 0.783841] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 0.783844] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 0.783866] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > [ 0.783870] ehci_hcd 0000:00:1d.7: using broken periodic workaround > [ 0.787763] ehci_hcd 0000:00:1d.7: debug port 1 > [ 0.787769] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 0.787779] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe977c00 > [ 0.800011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 0.800124] usb usb1: configuration #1 chosen from 1 choice > [ 0.800164] hub 1-0:1.0: USB hub found > [ 0.800170] hub 1-0:1.0: 8 ports detected > [ 0.800220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.800231] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.800250] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 0.800255] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 0.800258] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 0.800279] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > [ 0.800298] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 > [ 0.800360] usb usb2: configuration #1 chosen from 1 choice > [ 0.800379] hub 2-0:1.0: USB hub found > [ 0.800384] hub 2-0:1.0: 2 ports detected > [ 0.800417] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > [ 0.800421] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 0.800424] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 0.800444] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > [ 0.800463] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 > [ 0.800520] usb usb3: configuration #1 chosen from 1 choice > [ 0.800539] hub 3-0:1.0: USB hub found > [ 0.800543] hub 3-0:1.0: 2 ports detected > [ 0.800575] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 0.800580] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 0.800582] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 0.800607] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > [ 0.800632] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 > [ 0.800689] usb usb4: configuration #1 chosen from 1 choice > [ 0.800708] hub 4-0:1.0: USB hub found > [ 0.800713] hub 4-0:1.0: 2 ports detected > [ 0.800744] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 > [ 0.800749] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > [ 0.800751] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 0.800771] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > [ 0.800796] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 > [ 0.800858] usb usb5: configuration #1 chosen from 1 choice > [ 0.800877] hub 5-0:1.0: USB hub found > [ 0.800882] hub 5-0:1.0: 2 ports detected > [ 0.800960] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > [ 0.802940] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.802944] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 0.802993] mice: PS/2 mouse device common for all mice > [ 0.803072] rtc_cmos 00:03: RTC can wake from S4 > [ 0.803098] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > [ 0.803119] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 0.803197] device-mapper: uevent: version 1.0.3 > [ 0.803283] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx > [ 0.803332] device-mapper: multipath: version 1.1.0 loaded > [ 0.803334] device-mapper: multipath round-robin: version 1.0.0 loaded > [ 0.803415] EISA: Probing bus 0 at eisa.0 > [ 0.803438] EISA: Detected 0 cards. > [ 0.803496] cpuidle: using governor ladder > [ 0.803498] cpuidle: using governor menu > [ 0.803880] TCP cubic registered > [ 0.803997] NET: Registered protocol family 10 > [ 0.804351] lo: Disabled Privacy Extensions > [ 0.804614] NET: Registered protocol family 17 > [ 0.804629] Bluetooth: L2CAP ver 2.13 > [ 0.804630] Bluetooth: L2CAP socket layer initialized > [ 0.804632] Bluetooth: SCO (Voice Link) ver 0.6 > [ 0.804634] Bluetooth: SCO socket layer initialized > [ 0.804655] Bluetooth: RFCOMM TTY layer initialized > [ 0.804661] Bluetooth: RFCOMM socket layer initialized > [ 0.804662] Bluetooth: RFCOMM ver 1.11 > [ 0.805098] Using IPI No-Shortcut mode > [ 0.805143] PM: Resume from disk failed. > [ 0.805153] registered taskstats version 1 > [ 0.805237] Magic number: 2:232:48 > [ 0.805291] rtc_cmos 00:03: setting system clock to 2010-03-26 22:02:54 UTC (1269640974) > [ 0.805294] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 0.805295] EDD information not available. > [ 0.816516] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 > [ 0.946862] ata4.01: NODEV after polling detection > [ 0.952334] ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100 > [ 0.960210] ata3.00: ATA-8: WDC WD3200AAJS-65M0A0, 01.03E01, max UDMA/133 > [ 0.960212] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 0.960432] ata3.01: ATA-8: ST3500418AS, CC35, max UDMA/133 > [ 0.960437] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 0.968342] ata4.00: configured for UDMA/100 > [ 0.976221] ata3.00: configured for UDMA/133 > [ 0.992399] ata3.01: configured for UDMA/133 > [ 0.992552] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-6 01.0 PQ: 0 ANSI: 5 > [ 0.992638] sd 2:0:0:0: Attached scsi generic sg0 type 0 > [ 0.992692] scsi 2:0:1:0: Direct-Access ATA ST3500418AS CC35 PQ: 0 ANSI: 5 > [ 0.992761] sd 2:0:1:0: Attached scsi generic sg1 type 0 > [ 0.992789] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) > [ 0.992823] sd 2:0:0:0: [sda] Write Protect is off > [ 0.992826] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 0.992843] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 0.992942] sda: > [ 0.994279] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5 > [ 0.996536] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray > [ 0.996540] Uniform CD-ROM driver Revision: 3.20 > [ 0.996659] sr 3:0:0:0: Attached scsi CD-ROM sr0 > [ 0.996688] sr 3:0:0:0: Attached scsi generic sg2 type 5 > [ 1.013873] sd 2:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) > [ 1.013940] sd 2:0:1:0: [sdb] Write Protect is off > [ 1.013944] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 > [ 1.013981] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 1.014062] sdb: sda1 sda2 < sdb1 sdb2 < sda5 > sda3 > [ 1.068801] sdb5 > > [ 1.068914] sd 2:0:0:0: [sda] Attached SCSI disk > [ 1.069062] sd 2:0:1:0: [sdb] Attached SCSI disk > [ 1.069077] Freeing unused kernel memory: 540k freed > [ 1.069346] Write protecting the kernel text: 4580k > [ 1.069379] Write protecting the kernel read-only data: 1840k > [ 1.112524] usb 1-5: new high speed USB device using ehci_hcd and address 2 > [ 1.155314] Linux agpgart interface v0.103 > [ 1.157446] agpgart-intel 0000:00:00.0: Intel G33 Chipset > [ 1.157974] agpgart-intel 0000:00:00.0: detected 7164K stolen memory > [ 1.161043] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 > [ 1.178722] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.178741] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 1.178778] r8169 0000:02:00.0: setting latency timer to 64 > [ 1.178835] alloc irq_desc for 26 on node -1 > [ 1.178837] alloc kstat_irqs on node -1 > [ 1.178853] r8169 0000:02:00.0: irq 26 for MSI/MSI-X > [ 1.179365] eth0: RTL8101e at 0xf80bc000, 00:24:21:3e:ee:8c, XID 34300000 IRQ 26 > [ 1.229661] [drm] Initialized drm 1.1.0 20060810 > [ 1.245135] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 1.245142] i915 0000:00:02.0: setting latency timer to 64 > [ 1.252674] alloc irq_desc for 27 on node -1 > [ 1.252677] alloc kstat_irqs on node -1 > [ 1.252685] i915 0000:00:02.0: irq 27 for MSI/MSI-X > [ 1.253393] usb 1-5: configuration #1 chosen from 1 choice > [ 1.259195] ohci1394 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 1.361458] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 64 > [ 1.361462] [drm:edid_is_valid] *ERROR* Raw EDID: > [ 1.361465] <3>00 ff ff ff ff ff ff 00 42 93 18 17 d4 e2 00 00 ........B....... > [ 1.361466] <3>25 0e 01 03 08 22 1b 96 28 67 55 a5 5b 47 9c 25 %...."..(gU.[G.% > [ 1.361468] <3>1e 4f 54 bf ef 00 81 80 01 01 01 01 01 01 01 01 .OT............. > [ 1.361470] <3>01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 ......0*..Q.*@0p > [ 1.361472] <3>13 00 51 0e 11 00 00 1e 00 00 00 fc 00 4c 43 44 ..Q..........LCD > [ 1.361474] <3>20 31 37 53 0a 20 20 20 60 20 00 00 00 fd 00 3c 17S. ` .....< > [ 1.361476] <3>4b 1e 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff K.P... .... > [ 1.361477] <3>00 46 49 42 5a 34 39 30 35 38 30 36 38 55 00 9d .FIBZ49058068U.. > [ 1.361479] > [ 1.361481] i915 0000:00:02.0: VGA-1: EDID invalid. > [ 1.361484] [drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes > [ 1.363504] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[4/4] > [ 1.372979] [drm] fb0: inteldrmfb frame buffer device > [ 1.373031] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > [ 1.438392] [drm] DAC-6: set mode 800x600 9 > [ 1.460038] Console: switching to colour frame buffer device 100x37 > [ 1.893442] PM: Starting manual resume from disk > [ 1.893445] PM: Resume from partition 8:21 > [ 1.893447] PM: Checking hibernation image. > [ 1.893653] PM: Resume from disk failed. > [ 1.925675] EXT4-fs (sdb1): barriers enabled > [ 1.945444] kjournald2 starting: pid 426, dev sdb1:8, commit interval 5 seconds > [ 1.945513] EXT4-fs (sdb1): delayed allocation enabled > [ 1.945518] EXT4-fs: file extents enabled > [ 1.974410] EXT4-fs: mballoc enabled > [ 1.974422] EXT4-fs (sdb1): mounted filesystem with ordered data mode > [ 2.501011] type=1505 audit(1269640976.194:2): operation="profile_load" pid=451 name=/usr/share/gdm/guest-session/Xsession > [ 2.503580] type=1505 audit(1269640976.194:3): operation="profile_load" pid=452 name=/sbin/dhclient3 > [ 2.504176] type=1505 audit(1269640976.194:4): operation="profile_load" pid=452 name=/usr/lib/NetworkManager/nm-dhcp-client.action > [ 2.504487] type=1505 audit(1269640976.194:5): operation="profile_load" pid=452 name=/usr/lib/connman/scripts/dhclient-script > [ 2.544551] type=1505 audit(1269640976.238:6): operation="profile_load" pid=453 name=/usr/bin/evince > [ 2.553822] type=1505 audit(1269640976.246:7): operation="profile_load" pid=453 name=/usr/bin/evince-previewer > [ 2.559245] type=1505 audit(1269640976.250:8): operation="profile_load" pid=453 name=/usr/bin/evince-thumbnailer > [ 2.570227] type=1505 audit(1269640976.263:9): operation="profile_load" pid=455 name=/usr/lib/cups/backend/cups-pdf > [ 2.570900] type=1505 audit(1269640976.263:10): operation="profile_load" pid=455 name=/usr/sbin/cupsd > [ 2.644184] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004c0100003ffc] > [ 13.747941] udev: starting version 147 > [ 13.761875] Adding 4980108k swap on /dev/sdb5. Priority:-1 extents:1 across:4980108k > [ 13.786601] parport_pc 00:0f: reported by Plug and Play ACPI > [ 13.786643] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > [ 13.810228] intel_rng: FWH not detected > [ 13.839486] lp: driver loaded but no devices found > [ 13.868355] lp0: using parport0 (interrupt-driven). > [ 13.892765] ppdev: user-space parallel port driver > [ 13.914629] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 13.922229] Linux video capture interface: v2.00 > [ 13.935389] r8169: eth0: link up > [ 13.935396] r8169: eth0: link up > [ 13.940612] em28xx: New device @ 480 Mbps (eb1a:2861, interface 0, class 0) > [ 13.940981] em28xx #0: chip ID is em2860 > [ 13.978236] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 13.978267] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 13.991955] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > [ 13.991960] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] > [ 13.991964] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track > [ 13.991970] end_request: I/O error, dev sr0, sector 0 > [ 13.991973] __ratelimit: 12 callbacks suppressed > [ 13.991975] Buffer I/O error on device sr0, logical block 0 > [ 13.993366] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > [ 13.993372] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] > [ 13.993378] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track > [ 13.993386] end_request: I/O error, dev sr0, sector 0 > [ 13.993390] Buffer I/O error on device sr0, logical block 0 > [ 14.036998] em28xx #0: board has no eeprom > [ 14.046924] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS... > [ 14.047096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 > [ 14.048374] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) > [ 14.053726] psmouse serio1: ID: 10 00 64 > [ 14.060735] EXT4-fs (sdb1): internal journal on sdb1:8 > [ 14.090255] em28xx #0: found i2c device @ 0xb8 [tvp5150a] > [ 14.101020] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. > [ 14.101023] em28xx #0: You may try to use card=<n> insmod option to workaround that. > [ 14.101024] em28xx #0: Please send an email with this log to: > [ 14.101026] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> > [ 14.101028] em28xx #0: Board eeprom hash is 0x00000000 > [ 14.101029] em28xx #0: Board i2c devicelist hash is 0x77800080 > [ 14.101031] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: > [ 14.101033] em28xx #0: card=0 -> Unknown EM2800 video grabber > [ 14.101035] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber > [ 14.101037] em28xx #0: card=2 -> Terratec Cinergy 250 USB > [ 14.101038] em28xx #0: card=3 -> Pinnacle PCTV USB 2 > [ 14.101040] em28xx #0: card=4 -> Hauppauge WinTV USB 2 > [ 14.101042] em28xx #0: card=5 -> MSI VOX USB 2.0 > [ 14.101043] em28xx #0: card=6 -> Terratec Cinergy 200 USB > [ 14.101045] em28xx #0: card=7 -> Leadtek Winfast USB II > [ 14.101047] em28xx #0: card=8 -> Kworld USB2800 > [ 14.101048] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker > [ 14.101051] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 > [ 14.101052] em28xx #0: card=11 -> Terratec Hybrid XS > [ 14.101054] em28xx #0: card=12 -> Kworld PVR TV 2800 RF > [ 14.101056] em28xx #0: card=13 -> Terratec Prodigy XS > [ 14.101057] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 > [ 14.101059] em28xx #0: card=15 -> V-Gear PocketTV > [ 14.101061] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 > [ 14.101063] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick > [ 14.101065] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) > [ 14.101067] em28xx #0: card=19 -> EM2860/SAA711X Reference Design > [ 14.101068] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 > [ 14.101070] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder > [ 14.101072] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber > [ 14.101074] em28xx #0: card=23 -> Huaqi DLCW-130 > [ 14.101076] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner > [ 14.101077] em28xx #0: card=25 -> Gadmei UTV310 > [ 14.101079] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 > [ 14.101081] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) > [ 14.101083] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe > [ 14.101085] em28xx #0: card=29 -> <NULL> > [ 14.101086] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 > [ 14.101088] em28xx #0: card=31 -> Usbgear VD204v9 > [ 14.101090] em28xx #0: card=32 -> Supercomp USB 2.0 TV > [ 14.101091] em28xx #0: card=33 -> <NULL> > [ 14.101093] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS > [ 14.101095] em28xx #0: card=35 -> Typhoon DVD Maker > [ 14.101097] em28xx #0: card=36 -> NetGMBH Cam > [ 14.101098] em28xx #0: card=37 -> Gadmei UTV330 > [ 14.101100] em28xx #0: card=38 -> Yakumo MovieMixer > [ 14.101101] em28xx #0: card=39 -> KWorld PVRTV 300U > [ 14.101103] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U > [ 14.101105] em28xx #0: card=41 -> Kworld 350 U DVB-T > [ 14.101107] em28xx #0: card=42 -> Kworld 355 U DVB-T > [ 14.101108] em28xx #0: card=43 -> Terratec Cinergy T XS > [ 14.101110] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) > [ 14.101112] em28xx #0: card=45 -> Pinnacle PCTV DVB-T > [ 14.101114] em28xx #0: card=46 -> Compro, VideoMate U3 > [ 14.101115] em28xx #0: card=47 -> KWorld DVB-T 305U > [ 14.101117] em28xx #0: card=48 -> KWorld DVB-T 310U > [ 14.101119] em28xx #0: card=49 -> MSI DigiVox A/D > [ 14.101120] em28xx #0: card=50 -> MSI DigiVox A/D II > [ 14.101122] em28xx #0: card=51 -> Terratec Hybrid XS Secam > [ 14.101124] em28xx #0: card=52 -> DNT DA2 Hybrid > [ 14.101125] em28xx #0: card=53 -> Pinnacle Hybrid Pro > [ 14.101127] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR > [ 14.101129] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) > [ 14.101131] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) > [ 14.101132] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 > [ 14.101134] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo > [ 14.101136] em28xx #0: card=59 -> <NULL> > [ 14.101137] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 > [ 14.101139] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 > [ 14.101141] em28xx #0: card=62 -> Gadmei TVR200 > [ 14.101143] em28xx #0: card=63 -> Kaiomy TVnPC U2 > [ 14.101144] em28xx #0: card=64 -> Easy Cap Capture DC-60 > [ 14.101146] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ > [ 14.101148] em28xx #0: card=66 -> Empire dual TV > [ 14.101149] em28xx #0: card=67 -> Terratec Grabby > [ 14.101151] em28xx #0: card=68 -> Terratec AV350 > [ 14.101153] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box > [ 14.101154] em28xx #0: card=70 -> Evga inDtube > [ 14.101156] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix > [ 14.101251] em28xx #0: Config register raw data: 0x10 > [ 14.124880] em28xx #0: AC97 vendor ID = 0xffffffff > [ 14.139372] em28xx #0: AC97 features = 0x6a90 > [ 14.139375] em28xx #0: Empia 202 AC97 audio processor detected > [ 14.561978] em28xx #0: v4l2 driver version 0.1.2 > [ 14.587315] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 > [ 14.620775] type=1505 audit(1269655388.314:15): operation="profile_replace" pid=1111 name=/usr/share/gdm/guest-session/Xsession > [ 14.622220] type=1505 audit(1269655388.314:16): operation="profile_replace" pid=1112 name=/sbin/dhclient3 > [ 14.622795] type=1505 audit(1269655388.314:17): operation="profile_replace" pid=1112 name=/usr/lib/NetworkManager/nm-dhcp-client.action > [ 14.623110] type=1505 audit(1269655388.314:18): operation="profile_replace" pid=1112 name=/usr/lib/connman/scripts/dhclient-script > [ 14.626613] type=1505 audit(1269655388.318:19): operation="profile_replace" pid=1113 name=/usr/bin/evince > [ 14.638779] type=1505 audit(1269655388.330:20): operation="profile_replace" pid=1113 name=/usr/bin/evince-previewer > [ 14.644350] type=1505 audit(1269655388.338:21): operation="profile_replace" pid=1113 name=/usr/bin/evince-thumbnailer > [ 14.653139] type=1505 audit(1269655388.346:22): operation="profile_replace" pid=1120 name=/usr/lib/cups/backend/cups-pdf > [ 14.702788] cdrom: This disc doesn't have any tracks I recognize! > [ 15.416579] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 > [ 15.416592] em28xx audio device (eb1a:2861): interface 1, class 1 > [ 15.416601] em28xx audio device (eb1a:2861): interface 2, class 1 > [ 15.416617] usbcore: registered new interface driver em28xx > [ 15.416619] em28xx driver loaded > [ 15.430042] usbcore: registered new interface driver snd-usb-audio > [ 15.713049] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 32 > [ 15.713053] [drm:edid_is_valid] *ERROR* Raw EDID: > [ 15.713056] <3>00 ff ff ff ff ff ff 00 42 93 18 17 d4 f2 00 00 ........B....... > [ 15.713058] <3>25 0e 01 03 08 22 1b 96 28 67 55 a5 5b 47 9c 25 %...."..(gU.[G.% > [ 15.713060] <3>1e 4f 54 bf ef 00 81 80 01 01 01 01 01 01 01 01 .OT............. > [ 15.713061] <3>01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 ......0*..Q.*@0p > [ 15.713063] <3>13 00 51 0e 11 00 00 1e 00 00 00 fc 00 4c 43 44 ..Q..........LCD > [ 15.713065] <3>20 31 37 53 0a 20 20 20 20 20 00 00 00 fd 00 3c 17S. .....< > [ 15.713067] <3>5b 1e 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff [.P... .... > [ 15.713069] <3>00 46 49 42 5a 34 39 30 35 38 30 36 38 55 00 9d .FIBZ49058068U.. > [ 15.713070] > [ 15.713072] i915 0000:00:02.0: VGA-1: EDID invalid. > [ 15.876786] [drm:edid_is_valid] *ERROR* Raw EDID: > [ 15.876792] <3>10 ff ff ff ff ff ff 00 42 93 18 17 d4 e2 00 00 ........B....... > [ 15.876794] <3>25 0e 01 03 08 22 1b 96 28 67 55 a5 5b 47 9c 2d %...."..(gU.[G.- > [ 15.876796] <3>1e 4f 54 bf ef 00 81 81 01 01 01 01 01 01 01 01 .OT............. > [ 15.876798] <3>01 01 01 01 11 01 30 2a 00 98 51 00 2a 40 30 70 ......0*..Q.*@0p > [ 15.876799] <3>13 00 51 0e 11 00 00 1e 00 00 00 fc 00 4c 43 44 ..Q..........LCD > [ 15.876801] <3>20 31 37 53 0a 20 20 20 20 20 00 00 00 fd 00 3c 17S. .....< > [ 15.876803] <3>4b 1e 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff K.P... .... > [ 15.876805] <3>00 46 49 42 5a 34 39 30 35 38 30 36 38 55 00 9d .FIBZ49058068U.. > [ 15.876806] > [ 15.876809] i915 0000:00:02.0: VGA-1: EDID invalid. > [ 18.230985] CPU0 attaching NULL sched-domain. > [ 18.230990] CPU1 attaching NULL sched-domain. > [ 18.240075] CPU0 attaching sched-domain: > [ 18.240079] domain 0: span 0-1 level MC > [ 18.240081] groups: 0 1 > [ 18.240085] CPU1 attaching sched-domain: > [ 18.240087] domain 0: span 0-1 level MC > [ 18.240089] groups: 1 0 > [ 24.440008] eth0: no IPv6 routers present > dave@systemax1:~$ > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
