Hi, Was trying to get a firewire port working in Ubuntu 9.10 when I noticed that I had my USB Tevion DVD Maker plugged in and that you had a message requesting a copy of the dump for the unidentified DVD Maker. Attached is that dump as requested. Not sure where you are located but a German food store chain operating in the US under the name Aldi Food Stores has sold these a couple times that I know of. There are at least two versions although they function the same. A couple years ago they had them for $40 US. Last fall they had them for $20. At that price they should have been popular so should be other Linux users with them. Have seen a few users on the boards trying to get them going. They work well under Windows Vista but have never gotten one to work under Linux. Have been trying to get away from Windows for video work but have not been able to get either the this USB device or my Sony DSR-20 DV/DVCAM firewire deck to work under Linux. Am not all that good at Linux and any help you care to provide would be most welcome. Dave
dave@systemax1:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 (Ubuntu 2.6.31-20.58-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6a0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6a0000 - 00000000bf6ae000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf6ae000 - 00000000bf6f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6f0000 - 00000000bf6fe000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf6a0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf6a0000 (usable) [ 0.000000] modified: 00000000bf6a0000 - 00000000bf6ae000 (ACPI data) [ 0.000000] modified: 00000000bf6ae000 - 00000000bf6f0000 (ACPI NVS) [ 0.000000] modified: 00000000bf6f0000 - 00000000bf6fe000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 378a5000 - 37fef6df [ 0.000000] Allocated new RAMDISK: 008b2000 - 00ffc6df [ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fef6de to 008b2000 - 00ffc6de [ 0.000000] ACPI: RSDP 000f9640 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT bf6a0000 00044 (v01 SYSMAX SYXSUKIT 20090306 MSFT 00000097) [ 0.000000] ACPI: FACP bf6a0200 00084 (v01 7529MS A7529200 20090306 MSFT 00000097) [ 0.000000] ACPI: DSDT bf6a05c0 05A56 (v01 A7529 A7529200 00000200 INTL 20051117) [ 0.000000] ACPI: FACS bf6ae000 00040 [ 0.000000] ACPI: APIC bf6a0390 0006C (v01 7529MS A7529200 20090306 MSFT 00000097) [ 0.000000] ACPI: MCFG bf6a0400 0003C (v01 7529MS OEMMCFG 20090306 MSFT 00000097) [ 0.000000] ACPI: SLIC bf6a0440 00176 (v01 SYSMAX SYXSUKIT 20090306 MSFT 00000097) [ 0.000000] ACPI: OEMB bf6ae040 00071 (v01 7529MS A7529200 20090306 MSFT 00000097) [ 0.000000] ACPI: HPET bf6a6020 00038 (v01 7529MS OEMHPET 20090306 MSFT 00000097) [ 0.000000] ACPI: GSCI bf6ae0c0 02024 (v01 7529MS GMCHSCI 20090306 MSFT 00000097) [ 0.000000] ACPI: SSDT bf6b05f0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2174MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ad060] TEXT DATA BSS ==> [0000100000 - 00008ad060] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008ae000 - 00008b1191] BRK ==> [00008ae000 - 00008b1191] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008b2000 - 0000ffc6df] NEW RAMDISK ==> [00008b2000 - 0000ffc6df] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf6a0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf6a0 [ 0.000000] On node 0 totalpages: 783919 [ 0.000000] free_area_init_node: node 0, pgdat c0788900, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4350 pages used for memmap [ 0.000000] HighMem zone: 552356 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bf6fe000 (gap: bf6fe000:3f702000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2800000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777793 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=862ff519-00d8-4af1-8781-8c0dc43c83eb ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 15680320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf6a0) [ 0.000000] Memory: 3078572k/3136128k available (4578k kernel code, 56280k reserved, 2146k data, 540k init, 2226824k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0792000 - 0xc0819000 ( 540 kB) [ 0.000000] .data : 0xc0578948 - 0xc0791408 (2146 kB) [ 0.000000] .text : 0xc0100000 - 0xc0578948 (4578 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2520.620 MHz processor. [ 0.001343] Console: colour VGA+ 80x25 [ 0.001346] console [tty0] enabled [ 0.001477] hpet clockevent registered [ 0.001479] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.001484] Calibrating delay loop (skipped), value calculated using timer frequency.. 5041.24 BogoMIPS (lpj=10082480) [ 0.001501] Security Framework initialized [ 0.001519] AppArmor: AppArmor initialized [ 0.001525] Mount-cache hash table entries: 512 [ 0.001641] Initializing cgroup subsys ns [ 0.001645] Initializing cgroup subsys cpuacct [ 0.001649] Initializing cgroup subsys memory [ 0.001654] Initializing cgroup subsys freezer [ 0.001656] Initializing cgroup subsys net_cls [ 0.001669] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001671] CPU: L2 cache: 2048K [ 0.001673] CPU: Physical Processor ID: 0 [ 0.001674] CPU: Processor Core ID: 0 [ 0.001678] mce: CPU supports 6 MCE banks [ 0.001685] CPU0: Thermal monitoring enabled (TM2) [ 0.001688] using mwait in idle threads. [ 0.001694] Performance Counters: Core2 events, Intel PMU driver. [ 0.001700] ... version: 2 [ 0.001702] ... bit width: 40 [ 0.001703] ... generic counters: 2 [ 0.001704] ... value mask: 000000ffffffffff [ 0.001706] ... max period: 000000007fffffff [ 0.001707] ... fixed-purpose counters: 3 [ 0.001709] ... counter mask: 0000000700000003 [ 0.001715] Checking 'hlt' instruction... OK. [ 0.018381] ACPI: Core revision 20090521 [ 0.028350] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069445] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5041.24 BogoMIPS (lpj=10082489) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.157502] CPU1: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a [ 0.157515] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160022] Brought up 2 CPUs [ 0.160024] Total of 2 processors activated (10082.48 BogoMIPS). [ 0.160067] CPU0 attaching sched-domain: [ 0.160069] domain 0: span 0-1 level MC [ 0.160071] groups: 0 1 [ 0.160076] CPU1 attaching sched-domain: [ 0.160077] domain 0: span 0-1 level MC [ 0.160079] groups: 1 0 [ 0.160145] Booting paravirtualized kernel on bare hardware [ 0.160174] regulator: core version 0.5 [ 0.160174] Time: 22:02:53 Date: 03/26/10 [ 0.160174] NET: Registered protocol family 16 [ 0.160174] EISA bus registered [ 0.160178] ACPI: bus type pci registered [ 0.160233] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.160235] PCI: Not using MMCONFIG. [ 0.160381] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.160383] PCI: Using configuration type 1 for base access [ 0.161179] bio: create slab <bio-0> at 0 [ 0.161179] ACPI: EC: Look up EC in DSDT [ 0.170234] ACPI: Interpreter enabled [ 0.170243] ACPI: (supports S0 S1 S3 S4 S5) [ 0.170261] ACPI: Using IOAPIC for interrupt routing [ 0.170301] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.173399] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.173401] PCI: Using MMCONFIG for extended config space [ 0.179478] ACPI Warning: Incorrect checksum in table [OEMB] - B9, should be B4 20090521 tbutils-246 [ 0.180273] ACPI: No dock devices found. [ 0.180526] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.180603] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe980000-0xfe9fffff] [ 0.180607] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] [ 0.180612] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] [ 0.180616] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.180686] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe978000-0xfe97bfff] [ 0.180724] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.180728] pci 0000:00:1b.0: PME# disabled [ 0.180782] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.180785] pci 0000:00:1c.0: PME# disabled [ 0.180839] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.180842] pci 0000:00:1c.1: PME# disabled [ 0.180888] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f] [ 0.180932] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] [ 0.180975] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f] [ 0.181019] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] [ 0.181068] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe977c00-0xfe977fff] [ 0.181115] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.181119] pci 0000:00:1d.7: PME# disabled [ 0.181228] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.181231] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.181234] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.181237] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017) [ 0.181240] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff) [ 0.181278] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.181284] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.181290] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.181296] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.181301] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.181339] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] [ 0.181345] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] [ 0.181350] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] [ 0.181355] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] [ 0.181360] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] [ 0.181382] pci 0000:00:1f.2: PME# supported from D3hot [ 0.181385] pci 0000:00:1f.2: PME# disabled [ 0.181426] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.181540] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.181561] pci 0000:02:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff] [ 0.181583] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] [ 0.181628] pci 0000:02:00.0: supports D1 D2 [ 0.181630] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.181634] pci 0000:02:00.0: PME# disabled [ 0.181684] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.181687] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.181723] pci 0000:03:01.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff] [ 0.181766] pci 0000:03:01.0: supports D1 D2 [ 0.181767] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot [ 0.181771] pci 0000:03:01.0: PME# disabled [ 0.181813] pci 0000:00:1e.0: transparent bridge [ 0.181818] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.181835] pci_bus 0000:00: on NUMA node 0 [ 0.181838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.181966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.182062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.182112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.188894] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.188988] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.189079] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.189169] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.189259] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.189352] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.189444] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.189536] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.189679] SCSI subsystem initialized [ 0.189695] libata version 3.00 loaded. [ 0.189695] usbcore: registered new interface driver usbfs [ 0.189695] usbcore: registered new interface driver hub [ 0.189695] usbcore: registered new device driver usb [ 0.189695] ACPI: WMI: Mapper loaded [ 0.189695] PCI: Using ACPI for IRQ routing [ 0.200010] Bluetooth: Core ver 2.15 [ 0.200031] NET: Registered protocol family 31 [ 0.200031] Bluetooth: HCI device and connection manager initialized [ 0.200031] Bluetooth: HCI socket layer initialized [ 0.200031] NetLabel: Initializing [ 0.200031] NetLabel: domain hash size = 128 [ 0.200032] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.200058] NetLabel: unlabeled traffic allowed by default [ 0.200099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.200107] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.216012] pnp: PnP ACPI init [ 0.216027] ACPI: bus type pnp registered [ 0.219444] pnp: PnP ACPI: found 18 devices [ 0.219446] ACPI: ACPI bus type pnp unregistered [ 0.219449] PnPBIOS: Disabled by ACPI PNP [ 0.219458] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.219465] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.219467] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.219469] system 00:07: ioport range 0x480-0x4bf has been reserved [ 0.219472] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.219474] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.219476] system 00:07: iomem range 0xfed45000-0xfed89fff has been reserved [ 0.219481] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved [ 0.219486] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.219488] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.219493] system 00:0e: ioport range 0xa00-0xadf has been reserved [ 0.219495] system 00:0e: ioport range 0xae0-0xaef has been reserved [ 0.219500] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved [ 0.219504] system 00:11: iomem range 0x0-0x9ffff could not be reserved [ 0.219507] system 00:11: iomem range 0xc0000-0xcffff could not be reserved [ 0.219509] system 00:11: iomem range 0xe0000-0xfffff could not be reserved [ 0.219511] system 00:11: iomem range 0x100000-0xbf6fffff could not be reserved [ 0.254131] AppArmor: AppArmor Filesystem Enabled [ 0.254161] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.254163] pci 0000:00:1c.0: IO window: disabled [ 0.254167] pci 0000:00:1c.0: MEM window: disabled [ 0.254170] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.254174] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.254176] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.254181] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff [ 0.254184] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.254188] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.254189] pci 0000:00:1e.0: IO window: disabled [ 0.254194] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.254197] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.254207] alloc irq_desc for 16 on node -1 [ 0.254209] alloc kstat_irqs on node -1 [ 0.254213] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.254217] pci 0000:00:1c.0: setting latency timer to 64 [ 0.254223] alloc irq_desc for 17 on node -1 [ 0.254224] alloc kstat_irqs on node -1 [ 0.254227] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.254230] pci 0000:00:1c.1: setting latency timer to 64 [ 0.254235] pci 0000:00:1e.0: setting latency timer to 64 [ 0.254239] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.254241] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.254243] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.254245] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.254248] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.254250] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.254252] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.254279] NET: Registered protocol family 2 [ 0.254357] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.254609] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.255146] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.255388] TCP: Hash tables configured (established 131072 bind 65536) [ 0.255390] TCP reno registered [ 0.255450] NET: Registered protocol family 1 [ 0.255499] Trying to unpack rootfs image as initramfs... [ 0.408228] Freeing initrd memory: 7465k freed [ 0.411831] cpufreq-nforce2: No nForce2 chipset. [ 0.411855] Scanning for low memory corruption every 60 seconds [ 0.411946] audit: initializing netlink socket (disabled) [ 0.411962] type=2000 audit(1269640973.407:1): initialized [ 0.418920] highmem bounce pool size: 64 pages [ 0.418924] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.420085] VFS: Disk quotas dquot_6.5.2 [ 0.420134] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.420566] fuse init (API version 7.12) [ 0.420635] msgmni has been set to 1679 [ 0.420808] alg: No test for stdrng (krng) [ 0.420819] io scheduler noop registered [ 0.420821] io scheduler anticipatory registered [ 0.420822] io scheduler deadline registered [ 0.420855] io scheduler cfq registered (default) [ 0.420866] pci 0000:00:02.0: Boot video device [ 0.421033] alloc irq_desc for 24 on node -1 [ 0.421035] alloc kstat_irqs on node -1 [ 0.421045] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.421052] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.421150] alloc irq_desc for 25 on node -1 [ 0.421152] alloc kstat_irqs on node -1 [ 0.421158] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.421164] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.421237] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.421255] Firmware did not grant requested _OSC control [ 0.421270] Firmware did not grant requested _OSC control [ 0.421295] Firmware did not grant requested _OSC control [ 0.421305] Firmware did not grant requested _OSC control [ 0.421317] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.421428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.421431] ACPI: Power Button [PWRF] [ 0.421478] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.421480] ACPI: Power Button [PWRB] [ 0.422037] ACPI: SSDT bf6b00f0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.422277] processor LNXCPU:00: registered as cooling_device0 [ 0.422618] ACPI: SSDT bf6b0370 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117) [ 0.422844] processor LNXCPU:01: registered as cooling_device1 [ 0.425133] isapnp: Scanning for PnP cards... [ 0.501540] Switched to high resolution mode on CPU 1 [ 0.504001] Switched to high resolution mode on CPU 0 [ 0.777933] isapnp: No Plug & Play device found [ 0.778790] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.778885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.779160] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.780077] brd: module loaded [ 0.780431] loop: module loaded [ 0.780483] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.780566] ata_piix 0000:00:1f.1: version 2.13 [ 0.780576] alloc irq_desc for 18 on node -1 [ 0.780577] alloc kstat_irqs on node -1 [ 0.780582] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.780612] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.780667] scsi0 : ata_piix [ 0.780726] scsi1 : ata_piix [ 0.781668] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.781671] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.781688] alloc irq_desc for 19 on node -1 [ 0.781690] alloc kstat_irqs on node -1 [ 0.781694] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.781699] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.781733] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.781772] scsi2 : ata_piix [ 0.781904] scsi3 : ata_piix [ 0.783074] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 [ 0.783076] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 [ 0.783725] Fixed MDIO Bus: probed [ 0.783751] PPP generic driver version 2.4.2 [ 0.783814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.783828] alloc irq_desc for 23 on node -1 [ 0.783830] alloc kstat_irqs on node -1 [ 0.783833] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.783841] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.783844] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.783866] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.783870] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.787763] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.787769] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.787779] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe977c00 [ 0.800011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.800124] usb usb1: configuration #1 chosen from 1 choice [ 0.800164] hub 1-0:1.0: USB hub found [ 0.800170] hub 1-0:1.0: 8 ports detected [ 0.800220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.800231] uhci_hcd: USB Universal Host Controller Interface driver [ 0.800250] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.800255] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.800258] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.800279] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.800298] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 [ 0.800360] usb usb2: configuration #1 chosen from 1 choice [ 0.800379] hub 2-0:1.0: USB hub found [ 0.800384] hub 2-0:1.0: 2 ports detected [ 0.800417] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.800421] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.800424] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.800444] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.800463] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 [ 0.800520] usb usb3: configuration #1 chosen from 1 choice [ 0.800539] hub 3-0:1.0: USB hub found [ 0.800543] hub 3-0:1.0: 2 ports detected [ 0.800575] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.800580] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.800582] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.800607] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.800632] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 [ 0.800689] usb usb4: configuration #1 chosen from 1 choice [ 0.800708] hub 4-0:1.0: USB hub found [ 0.800713] hub 4-0:1.0: 2 ports detected [ 0.800744] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.800749] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.800751] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.800771] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.800796] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 [ 0.800858] usb usb5: configuration #1 chosen from 1 choice [ 0.800877] hub 5-0:1.0: USB hub found [ 0.800882] hub 5-0:1.0: 2 ports detected [ 0.800960] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.802940] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.802944] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.802993] mice: PS/2 mouse device common for all mice [ 0.803072] rtc_cmos 00:03: RTC can wake from S4 [ 0.803098] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.803119] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.803197] device-mapper: uevent: version 1.0.3 [ 0.803283] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.803332] device-mapper: multipath: version 1.1.0 loaded [ 0.803334] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.803415] EISA: Probing bus 0 at eisa.0 [ 0.803438] EISA: Detected 0 cards. [ 0.803496] cpuidle: using governor ladder [ 0.803498] cpuidle: using governor menu [ 0.803880] TCP cubic registered [ 0.803997] NET: Registered protocol family 10 [ 0.804351] lo: Disabled Privacy Extensions [ 0.804614] NET: Registered protocol family 17 [ 0.804629] Bluetooth: L2CAP ver 2.13 [ 0.804630] Bluetooth: L2CAP socket layer initialized [ 0.804632] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.804634] Bluetooth: SCO socket layer initialized [ 0.804655] Bluetooth: RFCOMM TTY layer initialized [ 0.804661] Bluetooth: RFCOMM socket layer initialized [ 0.804662] Bluetooth: RFCOMM ver 1.11 [ 0.805098] Using IPI No-Shortcut mode [ 0.805143] PM: Resume from disk failed. [ 0.805153] registered taskstats version 1 [ 0.805237] Magic number: 2:232:48 [ 0.805291] rtc_cmos 00:03: setting system clock to 2010-03-26 22:02:54 UTC (1269640974) [ 0.805294] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.805295] EDD information not available. [ 0.816516] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.946862] ata4.01: NODEV after polling detection [ 0.952334] ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100 [ 0.960210] ata3.00: ATA-8: WDC WD3200AAJS-65M0A0, 01.03E01, max UDMA/133 [ 0.960212] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.960432] ata3.01: ATA-8: ST3500418AS, CC35, max UDMA/133 [ 0.960437] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.968342] ata4.00: configured for UDMA/100 [ 0.976221] ata3.00: configured for UDMA/133 [ 0.992399] ata3.01: configured for UDMA/133 [ 0.992552] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-6 01.0 PQ: 0 ANSI: 5 [ 0.992638] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 0.992692] scsi 2:0:1:0: Direct-Access ATA ST3500418AS CC35 PQ: 0 ANSI: 5 [ 0.992761] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 0.992789] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.992823] sd 2:0:0:0: [sda] Write Protect is off [ 0.992826] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.992843] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.992942] sda: [ 0.994279] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5 [ 0.996536] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.996540] Uniform CD-ROM driver Revision: 3.20 [ 0.996659] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 0.996688] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 1.013873] sd 2:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.013940] sd 2:0:1:0: [sdb] Write Protect is off [ 1.013944] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.013981] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.014062] sdb: sda1 sda2 < sdb1 sdb2 < sda5 > sda3 [ 1.068801] sdb5 > [ 1.068914] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.069062] sd 2:0:1:0: [sdb] Attached SCSI disk [ 1.069077] Freeing unused kernel memory: 540k freed [ 1.069346] Write protecting the kernel text: 4580k [ 1.069379] Write protecting the kernel read-only data: 1840k [ 1.112524] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 1.155314] Linux agpgart interface v0.103 [ 1.157446] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 1.157974] agpgart-intel 0000:00:00.0: detected 7164K stolen memory [ 1.161043] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.178722] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.178741] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.178778] r8169 0000:02:00.0: setting latency timer to 64 [ 1.178835] alloc irq_desc for 26 on node -1 [ 1.178837] alloc kstat_irqs on node -1 [ 1.178853] r8169 0000:02:00.0: irq 26 for MSI/MSI-X [ 1.179365] eth0: RTL8101e at 0xf80bc000, 00:24:21:3e:ee:8c, XID 34300000 IRQ 26 [ 1.229661] [drm] Initialized drm 1.1.0 20060810 [ 1.245135] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.245142] i915 0000:00:02.0: setting latency timer to 64 [ 1.252674] alloc irq_desc for 27 on node -1 [ 1.252677] alloc kstat_irqs on node -1 [ 1.252685] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 1.253393] usb 1-5: configuration #1 chosen from 1 choice [ 1.259195] ohci1394 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.361458] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 64 [ 1.361462] [drm:edid_is_valid] *ERROR* Raw EDID: [ 1.361465] <3>00 ff ff ff ff ff ff 00 42 93 18 17 d4 e2 00 00 ........B....... [ 1.361466] <3>25 0e 01 03 08 22 1b 96 28 67 55 a5 5b 47 9c 25 %...."..(gU.[G.% [ 1.361468] <3>1e 4f 54 bf ef 00 81 80 01 01 01 01 01 01 01 01 .OT............. [ 1.361470] <3>01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 ......0*..Q.*@0p [ 1.361472] <3>13 00 51 0e 11 00 00 1e 00 00 00 fc 00 4c 43 44 ..Q..........LCD [ 1.361474] <3>20 31 37 53 0a 20 20 20 60 20 00 00 00 fd 00 3c 17S. ` .....< [ 1.361476] <3>4b 1e 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff K.P... .... [ 1.361477] <3>00 46 49 42 5a 34 39 30 35 38 30 36 38 55 00 9d .FIBZ49058068U.. [ 1.361479] [ 1.361481] i915 0000:00:02.0: VGA-1: EDID invalid. [ 1.361484] [drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes [ 1.363504] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.372979] [drm] fb0: inteldrmfb frame buffer device [ 1.373031] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.438392] [drm] DAC-6: set mode 800x600 9 [ 1.460038] Console: switching to colour frame buffer device 100x37 [ 1.893442] PM: Starting manual resume from disk [ 1.893445] PM: Resume from partition 8:21 [ 1.893447] PM: Checking hibernation image. [ 1.893653] PM: Resume from disk failed. [ 1.925675] EXT4-fs (sdb1): barriers enabled [ 1.945444] kjournald2 starting: pid 426, dev sdb1:8, commit interval 5 seconds [ 1.945513] EXT4-fs (sdb1): delayed allocation enabled [ 1.945518] EXT4-fs: file extents enabled [ 1.974410] EXT4-fs: mballoc enabled [ 1.974422] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 2.501011] type=1505 audit(1269640976.194:2): operation="profile_load" pid=451 name=/usr/share/gdm/guest-session/Xsession [ 2.503580] type=1505 audit(1269640976.194:3): operation="profile_load" pid=452 name=/sbin/dhclient3 [ 2.504176] type=1505 audit(1269640976.194:4): operation="profile_load" pid=452 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 2.504487] type=1505 audit(1269640976.194:5): operation="profile_load" pid=452 name=/usr/lib/connman/scripts/dhclient-script [ 2.544551] type=1505 audit(1269640976.238:6): operation="profile_load" pid=453 name=/usr/bin/evince [ 2.553822] type=1505 audit(1269640976.246:7): operation="profile_load" pid=453 name=/usr/bin/evince-previewer [ 2.559245] type=1505 audit(1269640976.250:8): operation="profile_load" pid=453 name=/usr/bin/evince-thumbnailer [ 2.570227] type=1505 audit(1269640976.263:9): operation="profile_load" pid=455 name=/usr/lib/cups/backend/cups-pdf [ 2.570900] type=1505 audit(1269640976.263:10): operation="profile_load" pid=455 name=/usr/sbin/cupsd [ 2.644184] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004c0100003ffc] [ 13.747941] udev: starting version 147 [ 13.761875] Adding 4980108k swap on /dev/sdb5. Priority:-1 extents:1 across:4980108k [ 13.786601] parport_pc 00:0f: reported by Plug and Play ACPI [ 13.786643] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 13.810228] intel_rng: FWH not detected [ 13.839486] lp: driver loaded but no devices found [ 13.868355] lp0: using parport0 (interrupt-driven). [ 13.892765] ppdev: user-space parallel port driver [ 13.914629] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.922229] Linux video capture interface: v2.00 [ 13.935389] r8169: eth0: link up [ 13.935396] r8169: eth0: link up [ 13.940612] em28xx: New device @ 480 Mbps (eb1a:2861, interface 0, class 0) [ 13.940981] em28xx #0: chip ID is em2860 [ 13.978236] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.978267] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.991955] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 13.991960] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 13.991964] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 13.991970] end_request: I/O error, dev sr0, sector 0 [ 13.991973] __ratelimit: 12 callbacks suppressed [ 13.991975] Buffer I/O error on device sr0, logical block 0 [ 13.993366] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 13.993372] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 13.993378] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 13.993386] end_request: I/O error, dev sr0, sector 0 [ 13.993390] Buffer I/O error on device sr0, logical block 0 [ 14.036998] em28xx #0: board has no eeprom [ 14.046924] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS... [ 14.047096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 [ 14.048374] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [ 14.053726] psmouse serio1: ID: 10 00 64 [ 14.060735] EXT4-fs (sdb1): internal journal on sdb1:8 [ 14.090255] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [ 14.101020] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 14.101023] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 14.101024] em28xx #0: Please send an email with this log to: [ 14.101026] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> [ 14.101028] em28xx #0: Board eeprom hash is 0x00000000 [ 14.101029] em28xx #0: Board i2c devicelist hash is 0x77800080 [ 14.101031] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 14.101033] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 14.101035] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 14.101037] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 14.101038] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 14.101040] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 14.101042] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 14.101043] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 14.101045] em28xx #0: card=7 -> Leadtek Winfast USB II [ 14.101047] em28xx #0: card=8 -> Kworld USB2800 [ 14.101048] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker [ 14.101051] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 14.101052] em28xx #0: card=11 -> Terratec Hybrid XS [ 14.101054] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 14.101056] em28xx #0: card=13 -> Terratec Prodigy XS [ 14.101057] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [ 14.101059] em28xx #0: card=15 -> V-Gear PocketTV [ 14.101061] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 14.101063] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 14.101065] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 14.101067] em28xx #0: card=19 -> EM2860/SAA711X Reference Design [ 14.101068] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 14.101070] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 14.101072] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber [ 14.101074] em28xx #0: card=23 -> Huaqi DLCW-130 [ 14.101076] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 14.101077] em28xx #0: card=25 -> Gadmei UTV310 [ 14.101079] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 14.101081] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 14.101083] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 14.101085] em28xx #0: card=29 -> <NULL> [ 14.101086] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 14.101088] em28xx #0: card=31 -> Usbgear VD204v9 [ 14.101090] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 14.101091] em28xx #0: card=33 -> <NULL> [ 14.101093] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 14.101095] em28xx #0: card=35 -> Typhoon DVD Maker [ 14.101097] em28xx #0: card=36 -> NetGMBH Cam [ 14.101098] em28xx #0: card=37 -> Gadmei UTV330 [ 14.101100] em28xx #0: card=38 -> Yakumo MovieMixer [ 14.101101] em28xx #0: card=39 -> KWorld PVRTV 300U [ 14.101103] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 14.101105] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 14.101107] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 14.101108] em28xx #0: card=43 -> Terratec Cinergy T XS [ 14.101110] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 14.101112] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 14.101114] em28xx #0: card=46 -> Compro, VideoMate U3 [ 14.101115] em28xx #0: card=47 -> KWorld DVB-T 305U [ 14.101117] em28xx #0: card=48 -> KWorld DVB-T 310U [ 14.101119] em28xx #0: card=49 -> MSI DigiVox A/D [ 14.101120] em28xx #0: card=50 -> MSI DigiVox A/D II [ 14.101122] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 14.101124] em28xx #0: card=52 -> DNT DA2 Hybrid [ 14.101125] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 14.101127] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 14.101129] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 14.101131] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 14.101132] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 14.101134] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 14.101136] em28xx #0: card=59 -> <NULL> [ 14.101137] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 [ 14.101139] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 [ 14.101141] em28xx #0: card=62 -> Gadmei TVR200 [ 14.101143] em28xx #0: card=63 -> Kaiomy TVnPC U2 [ 14.101144] em28xx #0: card=64 -> Easy Cap Capture DC-60 [ 14.101146] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ [ 14.101148] em28xx #0: card=66 -> Empire dual TV [ 14.101149] em28xx #0: card=67 -> Terratec Grabby [ 14.101151] em28xx #0: card=68 -> Terratec AV350 [ 14.101153] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box [ 14.101154] em28xx #0: card=70 -> Evga inDtube [ 14.101156] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix [ 14.101251] em28xx #0: Config register raw data: 0x10 [ 14.124880] em28xx #0: AC97 vendor ID = 0xffffffff [ 14.139372] em28xx #0: AC97 features = 0x6a90 [ 14.139375] em28xx #0: Empia 202 AC97 audio processor detected [ 14.561978] em28xx #0: v4l2 driver version 0.1.2 [ 14.587315] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 14.620775] type=1505 audit(1269655388.314:15): operation="profile_replace" pid=1111 name=/usr/share/gdm/guest-session/Xsession [ 14.622220] type=1505 audit(1269655388.314:16): operation="profile_replace" pid=1112 name=/sbin/dhclient3 [ 14.622795] type=1505 audit(1269655388.314:17): operation="profile_replace" pid=1112 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 14.623110] type=1505 audit(1269655388.314:18): operation="profile_replace" pid=1112 name=/usr/lib/connman/scripts/dhclient-script [ 14.626613] type=1505 audit(1269655388.318:19): operation="profile_replace" pid=1113 name=/usr/bin/evince [ 14.638779] type=1505 audit(1269655388.330:20): operation="profile_replace" pid=1113 name=/usr/bin/evince-previewer [ 14.644350] type=1505 audit(1269655388.338:21): operation="profile_replace" pid=1113 name=/usr/bin/evince-thumbnailer [ 14.653139] type=1505 audit(1269655388.346:22): operation="profile_replace" pid=1120 name=/usr/lib/cups/backend/cups-pdf [ 14.702788] cdrom: This disc doesn't have any tracks I recognize! [ 15.416579] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 [ 15.416592] em28xx audio device (eb1a:2861): interface 1, class 1 [ 15.416601] em28xx audio device (eb1a:2861): interface 2, class 1 [ 15.416617] usbcore: registered new interface driver em28xx [ 15.416619] em28xx driver loaded [ 15.430042] usbcore: registered new interface driver snd-usb-audio [ 15.713049] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 32 [ 15.713053] [drm:edid_is_valid] *ERROR* Raw EDID: [ 15.713056] <3>00 ff ff ff ff ff ff 00 42 93 18 17 d4 f2 00 00 ........B....... [ 15.713058] <3>25 0e 01 03 08 22 1b 96 28 67 55 a5 5b 47 9c 25 %...."..(gU.[G.% [ 15.713060] <3>1e 4f 54 bf ef 00 81 80 01 01 01 01 01 01 01 01 .OT............. [ 15.713061] <3>01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 ......0*..Q.*@0p [ 15.713063] <3>13 00 51 0e 11 00 00 1e 00 00 00 fc 00 4c 43 44 ..Q..........LCD [ 15.713065] <3>20 31 37 53 0a 20 20 20 20 20 00 00 00 fd 00 3c 17S. .....< [ 15.713067] <3>5b 1e 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff [.P... .... [ 15.713069] <3>00 46 49 42 5a 34 39 30 35 38 30 36 38 55 00 9d .FIBZ49058068U.. [ 15.713070] [ 15.713072] i915 0000:00:02.0: VGA-1: EDID invalid. [ 15.876786] [drm:edid_is_valid] *ERROR* Raw EDID: [ 15.876792] <3>10 ff ff ff ff ff ff 00 42 93 18 17 d4 e2 00 00 ........B....... [ 15.876794] <3>25 0e 01 03 08 22 1b 96 28 67 55 a5 5b 47 9c 2d %...."..(gU.[G.- [ 15.876796] <3>1e 4f 54 bf ef 00 81 81 01 01 01 01 01 01 01 01 .OT............. [ 15.876798] <3>01 01 01 01 11 01 30 2a 00 98 51 00 2a 40 30 70 ......0*..Q.*@0p [ 15.876799] <3>13 00 51 0e 11 00 00 1e 00 00 00 fc 00 4c 43 44 ..Q..........LCD [ 15.876801] <3>20 31 37 53 0a 20 20 20 20 20 00 00 00 fd 00 3c 17S. .....< [ 15.876803] <3>4b 1e 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff K.P... .... [ 15.876805] <3>00 46 49 42 5a 34 39 30 35 38 30 36 38 55 00 9d .FIBZ49058068U.. [ 15.876806] [ 15.876809] i915 0000:00:02.0: VGA-1: EDID invalid. [ 18.230985] CPU0 attaching NULL sched-domain. [ 18.230990] CPU1 attaching NULL sched-domain. [ 18.240075] CPU0 attaching sched-domain: [ 18.240079] domain 0: span 0-1 level MC [ 18.240081] groups: 0 1 [ 18.240085] CPU1 attaching sched-domain: [ 18.240087] domain 0: span 0-1 level MC [ 18.240089] groups: 1 0 [ 24.440008] eth0: no IPv6 routers present dave@systemax1:~$
