Clock and supplies are external to IMX274 sensor and are dependent on camera module design. So, this patch moves them to required properties. Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> --- Documentation/devicetree/bindings/media/i2c/imx274.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt index d0a5c899..b43bed6 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt +++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt @@ -10,15 +10,15 @@ at 1440 Mbps. Required Properties: - compatible: value should be "sony,imx274" for imx274 sensor - reg: I2C bus address of the device - -Optional Properties: -- reset-gpios: Sensor reset GPIO - clocks: Reference to the input clock. - clock-names: Should be "inck". - vana-supply: Sensor 2.8v analog supply. - vdig-supply: Sensor 1.8v digital core supply. - vddl-supply: Sensor digital IO 1.2v supply. +Optional Properties: +- reset-gpios: Sensor reset GPIO + The imx274 device node should contain one 'port' child node with an 'endpoint' subnode. For further reading on port node refer to Documentation/devicetree/bindings/media/video-interfaces.txt. -- 2.7.4
