This patch series includes
- Fix for proper Y_OUT_SIZE register configuration.
- Power on/off sequence implementation through runtime PM.
- dt-binding doc update to move input clock and supplies as required
properties.
Delta between patch versions:
[v4]: Includes below v4 feedback
- Implemented power on/off through Runtime PM.
- Use regulator bulk APIs.
- Use lower case for supply names.
[v3]: Includes below v2 feedback
- Removed explicit clk_set_rate from driver as default external
input clock rate can be configured through DT.
[v2]: Includes below changes based on v1 feedback
- External input clock name changed from xclk to inck.
- implementation change for get regulators to store all in array.
- To keep in reset low prior to regulators power on.
Sowjanya Komatineni (4):
media: i2c: imx274: Fix Y_OUT_SIZE register setting
dt-bindings: media: imx274: Use lower case for supply names
dt-bindings: media: imx274: Move clock and supplies to required
properties
media: i2c: imx274: Add IMX274 power on and off sequence
.../devicetree/bindings/media/i2c/imx274.txt | 10 +-
drivers/media/i2c/imx274.c | 153 ++++++++++++++++++++-
2 files changed, 154 insertions(+), 9 deletions(-)
--
2.7.4
