Re: [PATCH] media: ipu3.rst: Format media-ctl and yavta commands as code blocks

Jordan Hand <jorhand@xxxxxxxxxxxxxxxxxxx> · Fri, 24 Jul 2020 10:39:55 -0700






On 7/23/20 10:00 PM, Bingbu Cao wrote:


On 6/30/20 12:05 PM, jorhand@xxxxxxxxxxxxxxxxxxx wrote:
From: Jordan Hand <jorhand@xxxxxxxxxxxxxxxxxxx>
...
@@ -371,30 +373,32 @@ v4l2n command can be used. This helps process the raw Bayer frames and produces
  the desired results for the main output image and the viewfinder output, in NV12
  format.
  
-v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
---fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069
---reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out
---open=/dev/video5
---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf
---open=/dev/video6
---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7
---output=/tmp/frames.3A --fmt=type:META_CAPTURE,?
---reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
+.. code-block:: none
+
+    v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
+        --fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069
+        --reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out
+        --open=/dev/video5
+        --fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
+        --reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf
+        --open=/dev/video6
+        --fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
+        --reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7
+        --output=/tmp/frames.3A --fmt=type:META_CAPTURE,?
+        --reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
  
Just notice indent will exceed 80 characters.

In v2 I fixed this up, except for a couple lines where just one option 
is present and the line is slightly over 80 characters.

BTW, need a backslash at each EOL.

Added in v2

-Jordan






