The value of the data-shift property solely depend on the selected bus width and it's not freely configurable. Remove it from the bindings document and update its users accordingly. Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> --- Documentation/devicetree/bindings/media/i2c/ov5640.yaml | 9 --------- arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 - 2 files changed, 10 deletions(-) diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ov5640.yaml index 5e1662e848bd..ab700a1830aa 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov5640.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ov5640.yaml @@ -92,12 +92,6 @@ properties: parallel bus. enum: [8, 10] - data-shift: - description: | - Shall be set to <2> for 8 bits parallel bus (lines 9:2 are used) or - <0> for 10 bits parallel bus. - enum: [0, 2] - hsync-active: enum: [0, 1] @@ -115,7 +109,6 @@ properties: then: properties: bus-width: false - data-shift: false hsync-active: false vsync-active: false pclk-sample: false @@ -135,7 +128,6 @@ properties: - remote-endpoint - bus-type - bus-width - - data-shift - hsync-active - vsync-active - pclk-sample @@ -204,7 +196,6 @@ examples: remote-endpoint = <¶llel_from_ov5640>; bus-type = <5>; bus-width = <10>; - data-shift = <0>; hsync-active = <1>; vsync-active = <1>; pclk-sample = <1>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 613ede73b65b..96f96202ca63 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -192,7 +192,6 @@ ov5640_0: endpoint { remote-endpoint = <&dcmi_0>; bus-type = <5>; bus-width = <8>; - data-shift = <2>; /* lines 9:2 are used */ hsync-active = <0>; vsync-active = <0>; pclk-sample = <1>; -- 2.27.0