On Mon, Jul 6, 2020 at 9:43 PM Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
>
> On 04/07/2020 14:36, Alexandre Courbot wrote:
> > On Fri, Jul 3, 2020 at 5:30 PM Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> >>
> >> On 26/06/2020 10:04, Alexandre Courbot wrote:
> >>> v4l2-compliance expects ENOTTY to be returned when a given queue does
> >>> not support S_PARM.
> >>>
> >>> Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
> >>> ---
> >>> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +-
> >>> 1 file changed, 1 insertion(+), 1 deletion(-)
> >>>
> >>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> >>> index aae610e6d4e8..346a33c6869d 100644
> >>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> >>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> >>> @@ -200,7 +200,7 @@ static int vidioc_venc_s_parm(struct file *file, void *priv,
> >>> struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>>
> >>> if (a->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> >>> - return -EINVAL;
> >>> + return -ENOTTY;
> >>
> >> This doesn't look right: S_PARM *is* supported, just not for this buffer type.
> >> So -EINVAL is the correct error code.
> >>
> >> What is the exact v4l2-compliance failure? It might be a bug in the test.
> >
> > The error is as follows:
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > fail: v4l2-test-formats.cpp(1336): got error 22 when
> > setting parms for buftype 9
> > test VIDIOC_G/S_PARM: FAIL
>
> This is due to bugs in the compliance test that do not take into account the
> stateful encoder spec.
>
> The compliance test should check for the following:
>
> If ENUM_FRAMEINTERVALS is implemented, then G/S_PARM shall be supported for OUTPUT.
>
> If ENUM_FRAMEINTERVALS is not implemented, then G/S_PARM is optional for OUTPUT. But if
> G_PARM is implemented, then S_PARM shall also be implemented. In this case the
> frame interval range is determined by the codec standard.
>
> If V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL is set for one or more pixel formats,
> then G/S_PARM shall be implemented for both CAPTURE and OUTPUT.
>
> For backwards compatibility: if G/S_PARM is supported for OUTPUT, then it may be
> supported for CAPTURE as well.
>
> Can you try with the following patch?
>
> With this v4l2-compliance patch you should be able to drop patches 15/18 and 16/18
> of your series.
Indeed, with this patch v4l2-compliance passes on the encoder device
without 15/18 and 16/18. Thanks, I'll remove them from the next
iteration.
>
> Regards,
>
> Hans
>
> -------------------------- cut here ------------------------------
> diff --git a/utils/v4l2-compliance/v4l2-compliance.cpp b/utils/v4l2-compliance/v4l2-compliance.cpp
> index b5bde2f4..d0441651 100644
> --- a/utils/v4l2-compliance/v4l2-compliance.cpp
> +++ b/utils/v4l2-compliance/v4l2-compliance.cpp
> @@ -1250,6 +1250,7 @@ void testNode(struct node &node, struct node &node_m2m_cap, struct node &expbuf_
> node.frmsizes.clear();
> node.frmsizes_count.clear();
> node.has_frmintervals = false;
> + node.has_enc_cap_frame_interval = false;
> node.valid_buftypes = 0;
> node.valid_memorytype = 0;
> node.buf_caps = 0;
> diff --git a/utils/v4l2-compliance/v4l2-compliance.h b/utils/v4l2-compliance/v4l2-compliance.h
> index 21e31872..ae10bdf9 100644
> --- a/utils/v4l2-compliance/v4l2-compliance.h
> +++ b/utils/v4l2-compliance/v4l2-compliance.h
> @@ -141,6 +141,7 @@ struct base_node {
> frmsizes_set frmsizes;
> frmsizes_count_map frmsizes_count;
> bool has_frmintervals;
> + bool has_enc_cap_frame_interval;
> __u32 valid_buftypes;
> __u32 valid_buftype;
> __u32 valid_memorytype;
> diff --git a/utils/v4l2-compliance/v4l2-test-formats.cpp b/utils/v4l2-compliance/v4l2-test-formats.cpp
> index 3dfc593e..edf1536e 100644
> --- a/utils/v4l2-compliance/v4l2-test-formats.cpp
> +++ b/utils/v4l2-compliance/v4l2-test-formats.cpp
> @@ -71,6 +71,8 @@ static int testEnumFrameIntervals(struct node *node, __u32 pixfmt,
> ret = doioctl(node, VIDIOC_ENUM_FRAMEINTERVALS, &frmival);
> if (ret == ENOTTY)
> return ret;
> + // M2M devices don't support this, except for stateful encoders
> + fail_on_test(node->is_m2m && !(node->codec_mask & STATEFUL_ENCODER));
> if (f == 0 && ret == EINVAL) {
> if (type == V4L2_FRMSIZE_TYPE_DISCRETE)
> warn("found framesize %dx%d, but no frame intervals\n", w, h);
> @@ -264,16 +266,22 @@ static int testEnumFormatsType(struct node *node, unsigned type)
> return fail("drivers must never set the emulated flag\n");
> if (fmtdesc.flags & ~(V4L2_FMT_FLAG_COMPRESSED | V4L2_FMT_FLAG_EMULATED |
> V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM |
> - V4L2_FMT_FLAG_DYN_RESOLUTION))
> + V4L2_FMT_FLAG_DYN_RESOLUTION |
> + V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL))
> return fail("unknown flag %08x returned\n", fmtdesc.flags);
> if (!(fmtdesc.flags & V4L2_FMT_FLAG_COMPRESSED))
> fail_on_test(fmtdesc.flags & (V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM |
> - V4L2_FMT_FLAG_DYN_RESOLUTION));
> + V4L2_FMT_FLAG_DYN_RESOLUTION |
> + V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL));
> ret = testEnumFrameSizes(node, fmtdesc.pixelformat);
> if (ret)
> fail_on_test(node->codec_mask & STATEFUL_ENCODER);
> if (ret && ret != ENOTTY)
> return ret;
> + if (fmtdesc.flags & V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL) {
> + fail_on_test(!(node->codec_mask & STATEFUL_ENCODER));
> + node->has_enc_cap_frame_interval = true;
> + }
> f++;
> if (type == V4L2_BUF_TYPE_PRIVATE)
> continue;
> @@ -1222,6 +1230,7 @@ int testSlicedVBICap(struct node *node)
>
> static int testParmStruct(struct node *node, struct v4l2_streamparm &parm)
> {
> + bool is_stateful_enc = node->codec_mask & STATEFUL_ENCODER;
> struct v4l2_captureparm *cap = &parm.parm.capture;
> struct v4l2_outputparm *out = &parm.parm.output;
> int ret;
> @@ -1239,6 +1248,7 @@ static int testParmStruct(struct node *node, struct v4l2_streamparm &parm)
> fail_on_test(!cap->readbuffers);
> fail_on_test(cap->capability & ~V4L2_CAP_TIMEPERFRAME);
> fail_on_test(node->has_frmintervals && !cap->capability);
> + fail_on_test(is_stateful_enc && !cap->capability);
> fail_on_test(cap->capturemode & ~V4L2_MODE_HIGHQUALITY);
> if (cap->capturemode & V4L2_MODE_HIGHQUALITY)
> warn("V4L2_MODE_HIGHQUALITY is poorly defined\n");
> @@ -1257,6 +1267,7 @@ static int testParmStruct(struct node *node, struct v4l2_streamparm &parm)
> else if (node->g_caps() & V4L2_CAP_STREAMING)
> fail_on_test(!out->writebuffers);
> fail_on_test(out->capability & ~V4L2_CAP_TIMEPERFRAME);
> + fail_on_test(is_stateful_enc && !out->capability);
> fail_on_test(out->outputmode);
> fail_on_test(out->extendedmode);
> if (out->capability & V4L2_CAP_TIMEPERFRAME)
> @@ -1271,6 +1282,7 @@ static int testParmStruct(struct node *node, struct v4l2_streamparm &parm)
> static int testParmType(struct node *node, unsigned type)
> {
> struct v4l2_streamparm parm;
> + bool is_stateful_enc = node->codec_mask & STATEFUL_ENCODER;
> int ret;
>
> memset(&parm, 0, sizeof(parm));
> @@ -1288,10 +1300,10 @@ static int testParmType(struct node *node, unsigned type)
> case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
> case V4L2_BUF_TYPE_VIDEO_OUTPUT:
> case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
> - if (type && (node->g_caps() & buftype2cap[type]))
> + if (node->g_caps() & buftype2cap[type]) {
> fail_on_test(ret && node->has_frmintervals);
> - if (ret)
> - break;
> + fail_on_test(ret && node->has_enc_cap_frame_interval);
> + }
> break;
> default:
> fail_on_test(ret == 0);
> @@ -1300,8 +1312,15 @@ static int testParmType(struct node *node, unsigned type)
> fail_on_test(!doioctl(node, VIDIOC_S_PARM, &parm));
> break;
> }
> + if (ret == ENOTTY) {
> + memset(&parm, 0, sizeof(parm));
> + parm.type = type;
> + fail_on_test(doioctl(node, VIDIOC_S_PARM, &parm) != ENOTTY);
> + }
> if (ret == ENOTTY)
> return ret;
> + // M2M devices don't support this, except for stateful encoders
> + fail_on_test(node->is_m2m && !is_stateful_enc);
> if (ret == EINVAL)
> return ENOTTY;
> if (ret)
> @@ -1327,11 +1346,29 @@ static int testParmType(struct node *node, unsigned type)
> cap = parm.parm.output.capability;
> else
> cap = parm.parm.capture.capability;
> - fail_on_test(ret && node->has_frmintervals);
> - if (!ret && (cap & V4L2_CAP_TIMEPERFRAME) && !node->has_frmintervals)
> +
> + if (is_stateful_enc) {
> + fail_on_test(ret && node->has_enc_cap_frame_interval);
> + if (V4L2_TYPE_IS_OUTPUT(type))
> + fail_on_test(ret);
> + } else {
> + fail_on_test(ret && node->has_frmintervals);
> + }
> +
> + /*
> + * Stateful encoders can support S_PARM without ENUM_FRAMEINTERVALS.
> + * being present. In that case the limits of the chosen codec apply.
> + */
> + if (!ret && (cap & V4L2_CAP_TIMEPERFRAME) && !node->has_frmintervals && !is_stateful_enc)
> warn("S_PARM is supported for buftype %d, but not for ENUM_FRAMEINTERVALS\n", type);
> if (ret == ENOTTY)
> return 0;
> + /*
> + * S_PARM(CAPTURE) is optional for stateful encoders, so EINVAL is a
> + * valid error code in that case.
> + */
> + if (is_stateful_enc && !V4L2_TYPE_IS_OUTPUT(type) && ret == -EINVAL)
> + return 0;
> if (ret)
> return fail("got error %d when setting parms for buftype %d\n", ret, type);
> fail_on_test(parm.type != type);
> -------------------------- cut here ------------------------------
