On 04/07/2020 14:36, Alexandre Courbot wrote:
> On Fri, Jul 3, 2020 at 5:30 PM Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
>>
>> On 26/06/2020 10:04, Alexandre Courbot wrote:
>>> v4l2-compliance expects ENOTTY to be returned when a given queue does
>>> not support S_PARM.
>>>
>>> Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
>>> ---
>>> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>>> index aae610e6d4e8..346a33c6869d 100644
>>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>>> @@ -200,7 +200,7 @@ static int vidioc_venc_s_parm(struct file *file, void *priv,
>>> struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
>>>
>>> if (a->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
>>> - return -EINVAL;
>>> + return -ENOTTY;
>>
>> This doesn't look right: S_PARM *is* supported, just not for this buffer type.
>> So -EINVAL is the correct error code.
>>
>> What is the exact v4l2-compliance failure? It might be a bug in the test.
>
> The error is as follows:
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> fail: v4l2-test-formats.cpp(1336): got error 22 when
> setting parms for buftype 9
> test VIDIOC_G/S_PARM: FAIL
This is due to bugs in the compliance test that do not take into account the
stateful encoder spec.
The compliance test should check for the following:
If ENUM_FRAMEINTERVALS is implemented, then G/S_PARM shall be supported for OUTPUT.
If ENUM_FRAMEINTERVALS is not implemented, then G/S_PARM is optional for OUTPUT. But if
G_PARM is implemented, then S_PARM shall also be implemented. In this case the
frame interval range is determined by the codec standard.
If V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL is set for one or more pixel formats,
then G/S_PARM shall be implemented for both CAPTURE and OUTPUT.
For backwards compatibility: if G/S_PARM is supported for OUTPUT, then it may be
supported for CAPTURE as well.
Can you try with the following patch?
With this v4l2-compliance patch you should be able to drop patches 15/18 and 16/18
of your series.
Regards,
Hans
-------------------------- cut here ------------------------------
diff --git a/utils/v4l2-compliance/v4l2-compliance.cpp b/utils/v4l2-compliance/v4l2-compliance.cpp
index b5bde2f4..d0441651 100644
--- a/utils/v4l2-compliance/v4l2-compliance.cpp
+++ b/utils/v4l2-compliance/v4l2-compliance.cpp
@@ -1250,6 +1250,7 @@ void testNode(struct node &node, struct node &node_m2m_cap, struct node &expbuf_
node.frmsizes.clear();
node.frmsizes_count.clear();
node.has_frmintervals = false;
+ node.has_enc_cap_frame_interval = false;
node.valid_buftypes = 0;
node.valid_memorytype = 0;
node.buf_caps = 0;
diff --git a/utils/v4l2-compliance/v4l2-compliance.h b/utils/v4l2-compliance/v4l2-compliance.h
index 21e31872..ae10bdf9 100644
--- a/utils/v4l2-compliance/v4l2-compliance.h
+++ b/utils/v4l2-compliance/v4l2-compliance.h
@@ -141,6 +141,7 @@ struct base_node {
frmsizes_set frmsizes;
frmsizes_count_map frmsizes_count;
bool has_frmintervals;
+ bool has_enc_cap_frame_interval;
__u32 valid_buftypes;
__u32 valid_buftype;
__u32 valid_memorytype;
diff --git a/utils/v4l2-compliance/v4l2-test-formats.cpp b/utils/v4l2-compliance/v4l2-test-formats.cpp
index 3dfc593e..edf1536e 100644
--- a/utils/v4l2-compliance/v4l2-test-formats.cpp
+++ b/utils/v4l2-compliance/v4l2-test-formats.cpp
@@ -71,6 +71,8 @@ static int testEnumFrameIntervals(struct node *node, __u32 pixfmt,
ret = doioctl(node, VIDIOC_ENUM_FRAMEINTERVALS, &frmival);
if (ret == ENOTTY)
return ret;
+ // M2M devices don't support this, except for stateful encoders
+ fail_on_test(node->is_m2m && !(node->codec_mask & STATEFUL_ENCODER));
if (f == 0 && ret == EINVAL) {
if (type == V4L2_FRMSIZE_TYPE_DISCRETE)
warn("found framesize %dx%d, but no frame intervals\n", w, h);
@@ -264,16 +266,22 @@ static int testEnumFormatsType(struct node *node, unsigned type)
return fail("drivers must never set the emulated flag\n");
if (fmtdesc.flags & ~(V4L2_FMT_FLAG_COMPRESSED | V4L2_FMT_FLAG_EMULATED |
V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM |
- V4L2_FMT_FLAG_DYN_RESOLUTION))
+ V4L2_FMT_FLAG_DYN_RESOLUTION |
+ V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL))
return fail("unknown flag %08x returned\n", fmtdesc.flags);
if (!(fmtdesc.flags & V4L2_FMT_FLAG_COMPRESSED))
fail_on_test(fmtdesc.flags & (V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM |
- V4L2_FMT_FLAG_DYN_RESOLUTION));
+ V4L2_FMT_FLAG_DYN_RESOLUTION |
+ V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL));
ret = testEnumFrameSizes(node, fmtdesc.pixelformat);
if (ret)
fail_on_test(node->codec_mask & STATEFUL_ENCODER);
if (ret && ret != ENOTTY)
return ret;
+ if (fmtdesc.flags & V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL) {
+ fail_on_test(!(node->codec_mask & STATEFUL_ENCODER));
+ node->has_enc_cap_frame_interval = true;
+ }
f++;
if (type == V4L2_BUF_TYPE_PRIVATE)
continue;
@@ -1222,6 +1230,7 @@ int testSlicedVBICap(struct node *node)
static int testParmStruct(struct node *node, struct v4l2_streamparm &parm)
{
+ bool is_stateful_enc = node->codec_mask & STATEFUL_ENCODER;
struct v4l2_captureparm *cap = &parm.parm.capture;
struct v4l2_outputparm *out = &parm.parm.output;
int ret;
@@ -1239,6 +1248,7 @@ static int testParmStruct(struct node *node, struct v4l2_streamparm &parm)
fail_on_test(!cap->readbuffers);
fail_on_test(cap->capability & ~V4L2_CAP_TIMEPERFRAME);
fail_on_test(node->has_frmintervals && !cap->capability);
+ fail_on_test(is_stateful_enc && !cap->capability);
fail_on_test(cap->capturemode & ~V4L2_MODE_HIGHQUALITY);
if (cap->capturemode & V4L2_MODE_HIGHQUALITY)
warn("V4L2_MODE_HIGHQUALITY is poorly defined\n");
@@ -1257,6 +1267,7 @@ static int testParmStruct(struct node *node, struct v4l2_streamparm &parm)
else if (node->g_caps() & V4L2_CAP_STREAMING)
fail_on_test(!out->writebuffers);
fail_on_test(out->capability & ~V4L2_CAP_TIMEPERFRAME);
+ fail_on_test(is_stateful_enc && !out->capability);
fail_on_test(out->outputmode);
fail_on_test(out->extendedmode);
if (out->capability & V4L2_CAP_TIMEPERFRAME)
@@ -1271,6 +1282,7 @@ static int testParmStruct(struct node *node, struct v4l2_streamparm &parm)
static int testParmType(struct node *node, unsigned type)
{
struct v4l2_streamparm parm;
+ bool is_stateful_enc = node->codec_mask & STATEFUL_ENCODER;
int ret;
memset(&parm, 0, sizeof(parm));
@@ -1288,10 +1300,10 @@ static int testParmType(struct node *node, unsigned type)
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
- if (type && (node->g_caps() & buftype2cap[type]))
+ if (node->g_caps() & buftype2cap[type]) {
fail_on_test(ret && node->has_frmintervals);
- if (ret)
- break;
+ fail_on_test(ret && node->has_enc_cap_frame_interval);
+ }
break;
default:
fail_on_test(ret == 0);
@@ -1300,8 +1312,15 @@ static int testParmType(struct node *node, unsigned type)
fail_on_test(!doioctl(node, VIDIOC_S_PARM, &parm));
break;
}
+ if (ret == ENOTTY) {
+ memset(&parm, 0, sizeof(parm));
+ parm.type = type;
+ fail_on_test(doioctl(node, VIDIOC_S_PARM, &parm) != ENOTTY);
+ }
if (ret == ENOTTY)
return ret;
+ // M2M devices don't support this, except for stateful encoders
+ fail_on_test(node->is_m2m && !is_stateful_enc);
if (ret == EINVAL)
return ENOTTY;
if (ret)
@@ -1327,11 +1346,29 @@ static int testParmType(struct node *node, unsigned type)
cap = parm.parm.output.capability;
else
cap = parm.parm.capture.capability;
- fail_on_test(ret && node->has_frmintervals);
- if (!ret && (cap & V4L2_CAP_TIMEPERFRAME) && !node->has_frmintervals)
+
+ if (is_stateful_enc) {
+ fail_on_test(ret && node->has_enc_cap_frame_interval);
+ if (V4L2_TYPE_IS_OUTPUT(type))
+ fail_on_test(ret);
+ } else {
+ fail_on_test(ret && node->has_frmintervals);
+ }
+
+ /*
+ * Stateful encoders can support S_PARM without ENUM_FRAMEINTERVALS.
+ * being present. In that case the limits of the chosen codec apply.
+ */
+ if (!ret && (cap & V4L2_CAP_TIMEPERFRAME) && !node->has_frmintervals && !is_stateful_enc)
warn("S_PARM is supported for buftype %d, but not for ENUM_FRAMEINTERVALS\n", type);
if (ret == ENOTTY)
return 0;
+ /*
+ * S_PARM(CAPTURE) is optional for stateful encoders, so EINVAL is a
+ * valid error code in that case.
+ */
+ if (is_stateful_enc && !V4L2_TYPE_IS_OUTPUT(type) && ret == -EINVAL)
+ return 0;
if (ret)
return fail("got error %d when setting parms for buftype %d\n", ret, type);
fail_on_test(parm.type != type);
-------------------------- cut here ------------------------------
