Re: [PATCH v5 6/9] media: adv748x: prepare/enable mclk when the audio is used

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Kieran Bingham, Thu, Jun 18, 2020 18:23:14 +0200:
> On 02/04/2020 19:34, Alex Riesen wrote:
> > --- a/drivers/media/i2c/adv748x/adv748x-dai.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-dai.c
> > @@ -117,11 +117,22 @@ static int adv748x_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> >  
> >  static int adv748x_dai_startup(struct snd_pcm_substream *sub, struct snd_soc_dai *dai)
> >  {
> > +	int ret;
> >  	struct adv748x_state *state = state_of(dai);
> >  
> >  	if (sub->stream != SNDRV_PCM_STREAM_CAPTURE)
> >  		return -EINVAL;
> this looks quite bunched up so :
> 
> Newline...

Will do.

> > -	return set_audio_pads_state(state, 1);
> > +	ret = set_audio_pads_state(state, 1);
> > +	if (ret)
> > +		goto fail;
> 
> With no action required to cleanup here, I would just
> 		return ret;
> and remove the fail: label.

Of course.

> > +	ret = clk_prepare_enable(mclk_of(state));
> > +	if (ret)
> > +		goto fail_pwdn;
> 
> newline...
> 
> > +	return 0;
> 
> newline...
> 
> Other than that:
> 
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

Thanks!




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux