Re: [v6, 0/5] media: media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver

[Jungo Lin <jungo.lin@xxxxxxxxxxxx>]

Hi Helen;

Sorry for late reply.
Please check my feedback & questions below.

On Tue, 2020-04-14 at 09:25 -0300, Helen Koike wrote:
> 
> Hi Jungo,
> 
> On 4/10/20 7:32 AM, Jungo Lin wrote:
> > Hi Helen:
> >
> > Thanks for your comment.
> >
> > On Tue, 2020-03-31 at 12:34 -0300, Helen Koike wrote:
> >> Hi Jungo,
> >>
> >> I was taking a look at this patchset, please see my comments below.
> >>
> >> On 12/19/19 3:49 AM, Jungo Lin wrote:
> >>> Hello,
> >>>
> >>> This patch series adding the driver for Pass 1 (P1) unit in
> >>> Mediatek's camera ISP system on mt8183 SoC, which will be used in
> >>> camera features of CrOS.
> >>>
> >>> Pass 1 unit processes image signal from sensor devices and accepts the
> >>> tuning parameters to adjust the image quality. It performs optical
> >>> black correction, defect pixel correction, W/IR imbalance correction
> >>> and lens shading correction for RAW processing.
> >>>
> >>> The driver is implemented with V4L2 and media controller framework so
> >>> we have the following entities to describe the ISP pass 1 path.
> >>>
> >>> (The current metadata interface used in meta input and partial meta
> >>> nodes is only a temporary solution to kick off the driver development
> >>> and is not ready to be reviewed yet.)
> >>>
> >>> 1. meta input (output video device): connect to ISP P1 sub device.
> >>> It accepts the tuning buffer from user.
> >>>
> >>> 2. ISP P1 (sub device): connect to partial meta 0/1/2/3,
> >>> main stream and packed out video devices. When processing an image,
> >>> Pass 1 hardware supports multiple output images with different sizes
> >>> and formats so it needs two capture video devices ("main stream" and
> >>> "packed out") to return the image data to the user.
> >>>
> >>> 3. main stream (capture video device): return the processed image data
> >>> which is used in capture scenario.
> >>>
> >>> 4. packed out (capture video device): return the processed image data
> >>> which is used in preview scenario.
> >>>
> >>> 5. partial meta 0 (capture video device): return the AE/AWB statistics.
> >>>
> >>> 6. partial meta 1 (capture video device): return the AF statistics.
> >>>
> >>> 7. partial meta 2 (capture video device): return the local contrast
> >>>    enhanced statistics.
> >>>
> >>> 8. partial meta 3 (capture video device): return the local motion
> >>>    vector statistics.
> >>>
> >>> The overall patches of the series is:
> >>>
> >>> * Patch 1 & 2 are dt-bindings & dts information related to ISP P1 driver.
> >>> * Patch 3 adds new timestamp type for Camera AR (Augmented Reality) application
> >>> * Patch 4 extends the original V4L2 image & meta formats for ISP P1 driver.
> >>> * Patch 5 is the heart of ISP P1 driver. It handles the ISP  HW configuration.
> >>>   Moreover, implement standard V4L2 video driver that utilizes
> >>>   V4L2 and media framework APIs. Communicate with co-process via SCP
> >>>   communication to compose ISP registers in the firmware.
> >>>
> >>> Here is ISP P1 media topology:
> >>> It is included the main/sub sensor, sen-inf sub-devices and len device
> >>> which are implemented in below patch[1][2][3][4]:
> >>
> >> I would be nice if you could provide a branch with those applied.
> >>
> >
> > We apply those patches in the chromeos-4.19 to test.
> > https://chromium.googlesource.com/chromiumos/third_party/kernel/+/refs/heads/chromeos-4.19
> >
> >
> >>>
> >>> For Mediatek ISP P1 driver, it also depends on MT8183 SCP[5] & IOMMU[6]
> >>> patch sets.
> >>>
> >>> /usr/bin/media-ctl -p -d /dev/media2
> >>>
> >>> Media controller API version 4.19.89
> >>>
> >>> Media device information
> >>> ------------------------
> >>> driver          mtk-cam-p1
> >>> model           mtk-cam-p1
> >>> serial
> >>> bus info        platform:1a000000.camisp
> >>> hw revision     0x0
> >>> driver version  4.19.89
> >>>
> >>> Device topology
> >>> - entity 1: mtk-cam-p1 (12 pads, 8 links)
> >>
> >> If I understand correctly, the hardware supports 3 ISP instances, A, B, and C, and only B is being used.
> >> Is this correct?
> >>
> >> So maybe, rename it to mtk-isp-p1-b, to allow mtk-isp-p1-a and mtk-isp-p1-c to be added in the future.
> >>
> >
> > Currently, we only support single-cam in this SoC with upstream driver.
> > It is plan in next Mediatek SoC to support multi-cam capabilities. So
> > we'd like to keep the naming to avoid confusion.
> 
> I suppose this new Mediatek SoC would use this same driver?
> I'm just thinking about backwards compatibility. When you add support for this other SoC, the topology
> naming will be different then, right? (I guess it's ok).
> 

Sorry, my last comment should be corrected.
The new Mediatek SoC with new ISP HW version will support multi-cam
capabilities with new upstream driver. Due to the new enrich function,
it may not reuse current driver.

> >
> >>>             type V4L2 subdev subtype Unknown flags 0
> >>>             device node name /dev/v4l-subdev0
> >>> pad0: Sink
> >>> <- "mtk-cam-p1 meta input":0 []
> >>
> >> I would prefer the name params, or parameters, since input/output is confusing, since this is a output video node.
> >>
> >
> > Ok, we will revise our naming in next patch.
> >
> >>> pad1: Source
> >>> -> "mtk-cam-p1 main stream":0 [ENABLED,IMMUTABLE]
> >>
> >> Is there any reason for this link to be IMMUTABLE? Can't a use "mtk-cam-p1 packed out" without configuring "mtk-cam-p1 main stream" ?
> >>
> >
> > Yes, you are right. We will remove IMMUTABLE flag in next patch.
> >
> >>> pad2: Source
> >>> -> "mtk-cam-p1 packed out":0 []
> >>
> >> Same here, maybe "packed stream" ? Just for curiosity, why is it called packed?
> >>
> >
> > Comparing with V4L2_PIX_FMT_SGBRG8, we packed the color bits without no
> > padding in the memory. We may revise the naming in next patch.
> >
> >>> pad3: Source
> >>> -> "mtk-cam-p1 partial meta 0":0 []
> >>> pad4: Source
> >>> -> "mtk-cam-p1 partial meta 1":0 []
> >>> pad5: Source
> >>> -> "mtk-cam-p1 partial meta 2":0 []
> >>> pad6: Source
> >>> -> "mtk-cam-p1 partial meta 3":0 []
> >>
> >> Shouldn't those links be [ENABLED,IMMUTABLE] ?
> >>
> >> It would be better to have a more intuitive naming, e.g. "mtk-cam-p1 AE/AWB stats", "mtk-cam-p1 AF stats",
> >> "mtk-cam-p1 contrast stats", "mtk-cam-p1 motion stats", what do you think?
> >>
> >> I also would prefer to remove blank spaces.
> >>
> >> And maybe the prefix could be mtkisp-p1 ? (just to be similar with rkisp1), but I don't have strong feelings about this.
> >>
> >
> > No, these links are optional to setup for userspace.
> 
> Right, I just saw in the patch that you use links to know which video nodes should participate in the stream,
> and you wait for STREAM_ON to be called in all video nodes before actually enabling the stream, correct?
> 
> I'm not sure if using the link state is the best option (please see my comment on 5/5).
> Instead of waiting for them to call STREAM_ON, userspace could do a request to enable the stream in all the
> interesting nodes at once.
> 
> 
> Regards,
> Helen
> 


According to your suggestion, do you have sample code about "userspace
could do a request to enable the stream in all the interesting nodes at
once"? If this supports, it is helpful for us to simply our current
implementation.


Thanks,


Jungo


> > For naming part, we will align with driver source codes.
> >
> >>> pad7: Source
> >>> pad8: Source
> >>> pad9: Source
> >>> pad10: Source
> >>
> >> Why source pads that are not connected to anything? (I guess I need to check the last patch better).
> >>
> >
> > These pads are just reserved purpose.
> > We will plan to remove them in next patch.
> >
> > Thanks,
> >
> > Jungo
> >
> >> Regards,
> >> Helen
> >>
> >>> pad11: Sink
> >>> <- "1a040000.seninf":4 [ENABLED,IMMUTABLE]
> >>>
> >>> - entity 14: mtk-cam-p1 meta input (1 pad, 1 link)
> >>>              type Node subtype V4L flags 0
> >>>              device node name /dev/video2
> >>> pad0: Source
> >>> -> "mtk-cam-p1":0 []
> >>>
> >>> - entity 20: mtk-cam-p1 main stream (1 pad, 1 link)
> >>>              type Node subtype V4L flags 0
> >>>              device node name /dev/video3
> >>> pad0: Sink
> >>> <- "mtk-cam-p1":1 [ENABLED,IMMUTABLE]
> >>>
> >>> - entity 26: mtk-cam-p1 packed out (1 pad, 1 link)
> >>>              type Node subtype V4L flags 0
> >>>              device node name /dev/video4
> >>> pad0: Sink
> >>> <- "mtk-cam-p1":2 []
> >>>
> >>> - entity 32: mtk-cam-p1 partial meta 0 (1 pad, 1 link)
> >>>              type Node subtype V4L flags 0
> >>>              device node name /dev/video5
> >>> pad0: Sink
> >>> <- "mtk-cam-p1":3 []
> >>>
> >>> - entity 38: mtk-cam-p1 partial meta 1 (1 pad, 1 link)
> >>>              type Node subtype V4L flags 0
> >>>              device node name /dev/video6
> >>> pad0: Sink
> >>> <- "mtk-cam-p1":4 []
> >>>
> >>> - entity 44: mtk-cam-p1 partial meta 2 (1 pad, 1 link)
> >>>              type Node subtype V4L flags 0
> >>>              device node name /dev/video7
> >>> pad0: Sink
> >>> <- "mtk-cam-p1":5 []
> >>>
> >>> - entity 50: mtk-cam-p1 partial meta 3 (1 pad, 1 link)
> >>>              type Node subtype V4L flags 0
> >>>              device node name /dev/video8
> >>> pad0: Sink
> >>> <- "mtk-cam-p1":6 []
> >>>
> >>> - entity 56: 1a040000.seninf (12 pads, 3 links)
> >>>              type V4L2 subdev subtype Unknown flags 0
> >>>              device node name /dev/v4l-subdev1
> >>> pad0: Sink
> >>> [fmt:SGRBG10_1X10/3264x2448 field:none colorspace:srgb]
> >>> <- "ov8856 2-0010":0 [ENABLED]
> >>> pad1: Sink
> >>> [fmt:SRGGB10_1X10/1600x1200 field:none colorspace:srgb]
> >>> <- "ov02a10 4-003d":0 []
> >>> pad2: Sink
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> pad3: Sink
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> pad4: Source
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> -> "mtk-cam-p1":11 [ENABLED,IMMUTABLE]
> >>> pad5: Source
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> pad6: Source
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> pad7: Source
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> pad8: Source
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> pad9: Source
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> pad10: Source
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>> pad11: Source
> >>> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >>>
> >>> - entity 69: ov8856 2-0010 (1 pad, 1 link)
> >>>              type V4L2 subdev subtype Sensor flags 0
> >>>              device node name /dev/v4l-subdev2
> >>> pad0: Source
> >>> [fmt:SBGGR10_1X10/3264x2448 field:none colorspace:unknown ycbcr:709]
> >>> -> "1a040000.seninf":0 [ENABLED]
> >>>
> >>> - entity 73: dw9768 2-000c (0 pad, 0 link)
> >>>              type V4L2 subdev subtype Lens flags 0
> >>>              device node name /dev/v4l-subdev3
> >>>
> >>> - entity 74: ov02a10 4-003d (1 pad, 1 link)
> >>>              type V4L2 subdev subtype Sensor flags 0
> >>>              device node name /dev/v4l-subdev4
> >>> pad0: Source
> >>> [fmt:SRGGB10_1X10/1600x1200 field:none]
> >>> -> "1a040000.seninf":1 []
> >>>
> >>> ===========
> >>> = history =
> >>> ===========
> >>>
> >>> version 6:
> >>>  - Add port node description in the dt-binding document and device tree
> >>>    by Tomasz Figa.
> >>>  - Remove RGB format definitions in pixfmt-rgb.rst for kernel v5.5-rc1
> >>>    version.
> >>>  - Revise help description for VIDEO_MEDIATEK_ISP_PASS1.
> >>>  - Apply SCP v21 change in P1 driver by Pi-Hsun Shih.
> >>>  - Correct auto suspend timer value for suspend/resume issue.
> >>>  - Increase IPI guard timer to 1 second to avoid false alarm command
> >>>    timeout event.
> >>>  - Fix KE due to no sen-inf sub-device.
> >>>
> >>> Todo:
> >>>  - vb2_ops's buf_request_complete callback function implementation.
> >>>  - Add rst documents for Mediatek meta formats.
> >>>  - New meta buffer structure design & re-factoring.
> >>>
> >>> version 5:
> >>>  - Fixed Rob's comment on dt-binding format
> >>>  - Fix Tomasz's comment in mtk_isp_pm_suspend function
> >>>  - Support V4L2_BUF_FLAG_TIMESTAMP_BOOTTIME timestamp flag
> >>>    and new timestamp type in driver
> >>>  - Fix buffer en-queue timing issue in v4
> >>>  - Remove default link_notify callback function in mtk_cam_media_ops
> >>>
> >>> Todo:
> >>>  - vb2_ops's buf_request_complete callback function implementation
> >>>  - Add rst documents for Mediatek meta formats
> >>>  - New meta buffer structure design & re-factoring
> >>>  - Align and pack IPI command structures for EC ROM size shrink
> >>>
> >>> version 4:
> >>>  - Fix Tomasz's comments which are addressed in MTK ISP P1 driver v3
> >>>    patch[4]
> >>>  - Fix some Tomasz comments which are addressed in DIP's v2 patch[5]
> >>>  - Extend Mediatek proprietary image formats to support bayer order
> >>>  - Support V4L2_BUF_FLAG_TSTAMP_SRC_SOE for capture devices
> >>>
> >>> Todo:
> >>>  - vb2_ops's buf_request_complete callback function implementation
> >>>  - Add rst documents for Mediatek meta formats
> >>>  - New meta buffer structure design & re-factoring
> >>>  - Support V4L2_BUF_FLAG_TIMESTAMP_BOOTTIME timestamp flag
> >>>  - Align and pack IPI command structures for EC ROM size shrink
> >>>
> >>> version 3:
> >>>  - Remove ISP Pass 1 reserved memory device node and change to use SCP's
> >>>    reserved memory region. (Rob Herring)
> >>>  - Fix comments of ISP Pass 1 device node & dt-bindings document (Rob Herring)
> >>>  - Revise ISP Pass1 Kconfig
> >>>  - Add rst documents for Mediatek image formats (Hans Verkuil)
> >>>  - Fix kernel warning messages when running v4l2_compliance test
> >>>  - Move AFO buffer enqueue & de-queue from request API to non-request
> >>>  - mtk_cam-ctrl.h/mtk_cam-ctrl.c
> >>>    Revise Mediatek ISP Pass1 specific V4L2 control naming & file licence
> >>>    declaration (Hans Verkuil)
> >>>    Split GET_BIN_INFO control into two controls to get width & height
> >>>    in-dependently (Hans Verkuil)
> >>>  - mtk_cam-v4l2-util.h/mtk_cam-v4l2-util.c
> >>>    Merging mtk_cam-dev.c and mtk_cam-v4l2-util.c. (Drew Davenport)
> >>>    Remove the pix_mode argument in related functions and unreachable code. (Drew Davenport)
> >>>    Fix Drew's comments which are addressed in v2 patch
> >>>    Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> >>>  - mtk_cam-regs.h / mtk_cam.h / mtk_cam.c
> >>>    Fix Drew's comments which are addressed in v2 patch
> >>>    Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> >>>    Refactoring mtk_isp_config & mtk_isp_req_enqueue functions
> >>>  - mtk_cam-scp.h / mtk_cam-scp.c
> >>>    Move function declarations from mtk_cam.h to mtk_cam-scp.h (Drew Davenport)
> >>>    Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> >>>    Fix ISP de-initialize timing KE issue
> >>>  - mtk_cam-smem.h / mtk_cam-smem-dev.c
> >>>    Get the reserved shared memory via SCP driver (Tomasz Figa)
> >>>
> >>> Todo:
> >>>  - Add rst documents for Mediatek meta formats
> >>>  - New meta buffer structure design & re-factoring
> >>>
> >>> version 2:
> >>>  - Add 3A enhancement feature which includes:
> >>>    Separates 3A pipeline out of frame basis to improve
> >>>    AE/AWB (exposure and white balance) performance.
> >>>    Add 2 SCP sub-commands for 3A meta buffers.
> >>>  - Add new child device to manage P1 shared memory between P1 HW unit
> >>>    and co-processor.
> >>>  - Remove mediatek,cam_smem.txt & cam_smem dts node in mt8183.dtsi.
> >>>  - Revised document wording for dt-bindings documents & dts information.
> >>>  - Remove mtk_cam-ctx.h & mtk_cam-dev-ctx-core.c and move these
> >>>    source codes to mtk_cam-dev.h & mtk_cam-dev.c.
> >>>  - mtk_cam-dev.h / mtk_cam-dev.c
> >>>    Revised mtk_cam_video_device & mtk_cam_dev to remove unused structure fields
> >>>    or add comments.
> >>>    Revised buffer size for LMVO & LCSO.
> >>>    Fix pixel format utility function.
> >>>    Add vb2_dma_contig_set_max_seg_size to configure DMA max segment size.
> >>>  - mtk_cam-v4l2-util.c
> >>>    Refactoring V4L2 async mechanism with seninf driver only
> >>>    Refactoring CIO (Connection IO) implementation with active sensor
> >>>    Revised stream on function for 3A enhancement feature
> >>>    Add new V4L2 en-queue/de-queue utility functions for 3A enhancement feature
> >>>  - mtk_cam-regs.h / mtk_cam.h / mtk_cam.c
> >>>    Add meta buffer index register definitions
> >>>    Add meta DMA configuration function.
> >>>    Separate with frame-base and non-frame-base en-queue/de-queue functions
> >>>    Add isp_setup_scp_rproc function to get RPC handle
> >>>    Add mtk_cam_reserved_memory_init for shared memory management
> >>>  - mtk_cam-scp.h / mtk_cam-scp.c
> >>>    Add new meta strictures for 3A enhancement feature
> >>>    Add new IPI command utility function for 3A enhancement feature
> >>>    Enhance isp_composer_dma_sg_init function flow
> >>>    Shorten overall IPI command structure size
> >>>    Remove scp_state state checking
> >>>    Improve code readability
> >>>  - mtk_cam-smem.h / mtk_cam-smem-dev.c
> >>>    Add mtk_cam_alloc_smem_dev to allocate one new child device of ISP driver.
> >>>    Handling P1 driver 's reserved memory & allocate DMA buffers based on this
> >>>    memory region.
> >>>
> >>> TODOs:
> >>>  - 3A enhancement feature bug fixing
> >>>
> >>> version 1:
> >>>  - Revised driver sources based on Tomasz's comments including
> >>>    part1/2/3/4 in RFC V0 patch.
> >>>  - Remove DMA cache mechanism.
> >>>    Support two new video devices (LCSO/LMVO) for advance camera
> >>>    features.
> >>>  - Fixed v4l2-compliance test failure items.
> >>>  - Add private controls for Mediatek camera middle-ware.
> >>>  - Replace VPU driver's APIs with new SCP driver interface for
> >>>    co-processor communication.
> >>>  - Refactoring mtk_cam_scp.c to use ring-buffers mechanism for IPI
> >>>    commands RX handling.
> >>>  - Fix internal bugs.
> >>>
> >>> TODOs:
> >>>  - Remove mtk_cam_smem_drv.c & mtk_cam_smem.h and implement DMA pool
> >>>    for shared memory management.
> >>>  - Revised file names.
> >>>  - Support non frame-sync AFO/AAO DMA buffers
> >>>
> >>> version 0:
> >>> - Initial submission
> >>>
> >>> ==================
> >>>  Dependent patch set
> >>> ==================
> >>>
> >>> Camera ISP P1 driver depends on seninf driver, SCP driver.
> >>> The patches are listed as following:
> >>>
> >>> [1]. media: support Mediatek sensor interface driver
> >>> https://patchwork.kernel.org/cover/11145845/
> >>>
> >>> [2]. media: ov8856: Add YAML binding and sensor mode support
> >>> https://patchwork.kernel.org/cover/11220785/
> >>>
> >>> [3]. media: i2c: Add support for OV02A10 sensor
> >>> https://patchwork.kernel.org/cover/11284779/
> >>>
> >>> [4]. media: i2c: add support for DW9768 VCM driver
> >>> https://patchwork.kernel.org/cover/11132299/
> >>>
> >>> [5]. Add support for mt8183 SCP
> >>> https://patchwork.kernel.org/cover/11239065/
> >>>
> >>> [6]. MT8183 IOMMU SUPPORT
> >>> https://patchwork.kernel.org/cover/11112765/
> >>>
> >>> ==================
> >>>  Compliance test
> >>> ==================
> >>>
> >>> The v4l2-compliance is built with the below lastest patch.
> >>> https://git.linuxtv.org/v4l-utils.git/commit/?id=e9a7593ec6ae98704ecb35ea64948d34c23a5158
> >>>
> >>> Note 1.
> >>> This testing depends on the above seninf, sensors and len patches[1][2][3][4].
> >>>
> >>> Note 2.
> >>> For failed test csaes in video2~8, it is caused by new V4L2 timestamp
> >>> called V4L2_BUF_FLAG_TIMESTAMP_BOOTIME.
> >>>
> >>> Note 3.
> >>> The current some failure items are related to Mediatek sensors/len driver [2][3][3]
> >>>
> >>> /usr/bin/v4l2-compliance -m /dev/media2
> >>>
> >>> v4l2-compliance SHA: not available, 32 bits
> >>>
> >>> Compliance test for mtk-cam-p1 device /dev/media1:
> >>>
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.67
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.67
> >>>
> >>> Required ioctls:
> >>> test MEDIA_IOC_DEVICE_INFO: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/media1 open: OK
> >>> test MEDIA_IOC_DEVICE_INFO: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Media Controller ioctls:
> >>> test MEDIA_IOC_G_TOPOLOGY: OK
> >>> Entities: 11 Interfaces: 11 Pads: 33 Links: 21
> >>> test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
> >>> test MEDIA_IOC_SETUP_LINK: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/media1: 7, Succeeded: 7, Failed: 0, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/video25:
> >>>
> >>> Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Card type        : mtk-cam-p1
> >>> Bus info         : platform:1a000000.camisp
> >>> Driver version   : 4.19.67
> >>> Capabilities     : 0x8c200000
> >>> Streaming
> >>> Extended Pix Format
> >>> Device Capabilities
> >>> Device Caps      : 0x0c200000
> >>> Streaming
> >>> Extended Pix Format
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.67
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.67
> >>> Interface Info:
> >>> ID               : 0x03000010
> >>> Type             : V4L Video
> >>> Entity Info:
> >>> ID               : 0x0000000e (14)
> >>> Name             : mtk-cam-p1 meta input
> >>> Function         : V4L2 I/O
> >>> Pad 0x0100000f   : 0: Source
> >>>   Link 0x02000012: to remote pad 0x1000002 of entity 'mtk-cam-p1': Data
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>> test VIDIOC_QUERYCAP: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/video25 open: OK
> >>> test VIDIOC_QUERYCAP: OK
> >>> test VIDIOC_G/S_PRIORITY: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK
> >>> test VIDIOC_TRY_FMT: OK
> >>> test VIDIOC_S_FMT: OK
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composiv4l2-compliance SHA: not available, 32 bits
> >>>
> >>> Compliance test for mtk-cam-p1 device /dev/media2:
> >>>
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>>
> >>> Required ioctls:
> >>> test MEDIA_IOC_DEVICE_INFO: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/media2 open: OK
> >>> test MEDIA_IOC_DEVICE_INFO: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Media Controller ioctls:
> >>> test MEDIA_IOC_G_TOPOLOGY: OK
> >>> Entities: 12 Interfaces: 12 Pads: 33 Links: 22
> >>> test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
> >>> test MEDIA_IOC_SETUP_LINK: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/media2: 7, Succeeded: 7, Failed: 0, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/video2:
> >>>
> >>> Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Card type        : mtk-cam-p1
> >>> Bus info         : platform:1a000000.camisp
> >>> Driver version   : 4.19.89
> >>> Capabilities     : 0x8c200000
> >>> Metadata Output
> >>> Streaming
> >>> Extended Pix Format
> >>> Device Capabilities
> >>> Device Caps      : 0x0c200000
> >>> Metadata Output
> >>> Streaming
> >>> Extended Pix Format
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000010
> >>> Type             : V4L Video
> >>> Entity Info:
> >>> ID               : 0x0000000e (14)
> >>> Name             : mtk-cam-p1 meta input
> >>> Function         : V4L2 I/O
> >>> Pad 0x0100000f   : 0: Source
> >>>   Link 0x02000012: to remote pad 0x1000002 of entity 'mtk-cam-p1': Data
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>> test VIDIOC_QUERYCAP: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/video2 open: OK
> >>> test VIDIOC_QUERYCAP: OK
> >>> test VIDIOC_G/S_PRIORITY: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK
> >>> test VIDIOC_TRY_FMT: OK
> >>> test VIDIOC_S_FMT: OK
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> >>> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> >>> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> >>> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> >>> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/video2: 45, Succeeded: 44, Failed: 1, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/video3:
> >>>
> >>> Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Card type        : mtk-cam-p1
> >>> Bus info         : platform:1a000000.camisp
> >>> Driver version   : 4.19.89
> >>> Capabilities     : 0x84201000
> >>> Video Capture Multiplanar
> >>> Streaming
> >>> Extended Pix Format
> >>> Device Capabilities
> >>> Device Caps      : 0x04201000
> >>> Video Capture Multiplanar
> >>> Streaming
> >>> Extended Pix Format
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000016
> >>> Type             : V4L Video
> >>> Entity Info:
> >>> ID               : 0x00000014 (20)
> >>> Name             : mtk-cam-p1 main stream
> >>> Function         : V4L2 I/O
> >>> Pad 0x01000015   : 0: Sink
> >>>   Link 0x02000018: from remote pad 0x1000003 of entity 'mtk-cam-p1': Data, Enabled, Immutable
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>> test VIDIOC_QUERYCAP: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/video3 open: OK
> >>> test VIDIOC_QUERYCAP: OK
> >>> test VIDIOC_G/S_PRIORITY: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK
> >>> test VIDIOC_TRY_FMT: OK
> >>> test VIDIOC_S_FMT: OK
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> >>> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> >>> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> >>> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> >>> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/video3: 45, Succeeded: 44, Failed: 1, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/video4:
> >>>
> >>> Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Card type        : mtk-cam-p1
> >>> Bus info         : platform:1a000000.camisp
> >>> Driver version   : 4.19.89
> >>> Capabilities     : 0x84201000
> >>> Video Capture Multiplanar
> >>> Streaming
> >>> Extended Pix Format
> >>> Device Capabilities
> >>> Device Caps      : 0x04201000
> >>> Video Capture Multiplanar
> >>> Streaming
> >>> Extended Pix Format
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x0300001c
> >>> Type             : V4L Video
> >>> Entity Info:
> >>> ID               : 0x0000001a (26)
> >>> Name             : mtk-cam-p1 packed out
> >>> Function         : V4L2 I/O
> >>> Pad 0x0100001b   : 0: Sink
> >>>   Link 0x0200001e: from remote pad 0x1000004 of entity 'mtk-cam-p1': Data
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>> test VIDIOC_QUERYCAP: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/video4 open: OK
> >>> test VIDIOC_QUERYCAP: OK
> >>> test VIDIOC_G/S_PRIORITY: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK
> >>> test VIDIOC_TRY_FMT: OK
> >>> test VIDIOC_S_FMT: OK
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> >>> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> >>> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> >>> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> >>> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/video4: 45, Succeeded: 44, Failed: 1, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/video5:
> >>>
> >>> Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Card type        : mtk-cam-p1
> >>> Bus info         : platform:1a000000.camisp
> >>> Driver version   : 4.19.89
> >>> Capabilities     : 0x84a00000
> >>> Metadata Capture
> >>> Streaming
> >>> Extended Pix Format
> >>> Device Capabilities
> >>> Device Caps      : 0x04a00000
> >>> Metadata Capture
> >>> Streaming
> >>> Extended Pix Format
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000022
> >>> Type             : V4L Video
> >>> Entity Info:
> >>> ID               : 0x00000020 (32)
> >>> Name             : mtk-cam-p1 partial meta 0
> >>> Function         : V4L2 I/O
> >>> Pad 0x01000021   : 0: Sink
> >>>   Link 0x02000024: from remote pad 0x1000005 of entity 'mtk-cam-p1': Data
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>> test VIDIOC_QUERYCAP: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/video5 open: OK
> >>> test VIDIOC_QUERYCAP: OK
> >>> test VIDIOC_G/S_PRIORITY: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK
> >>> test VIDIOC_TRY_FMT: OK
> >>> test VIDIOC_S_FMT: OK
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> >>> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> >>> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> >>> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> >>> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/video5: 45, Succeeded: 44, Failed: 1, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/video6:
> >>>
> >>> Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Card type        : mtk-cam-p1
> >>> Bus info         : platform:1a000000.camisp
> >>> Driver version   : 4.19.89
> >>> Capabilities     : 0x84a00000
> >>> Metadata Capture
> >>> Streaming
> >>> Extended Pix Format
> >>> Device Capabilities
> >>> Device Caps      : 0x04a00000
> >>> Metadata Capture
> >>> Streaming
> >>> Extended Pix Format
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000028
> >>> Type             : V4L Video
> >>> Entity Info:
> >>> ID               : 0x00000026 (38)
> >>> Name             : mtk-cam-p1 partial meta 1
> >>> Function         : V4L2 I/O
> >>> Pad 0x01000027   : 0: Sink
> >>>   Link 0x0200002a: from remote pad 0x1000006 of entity 'mtk-cam-p1': Data
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>> test VIDIOC_QUERYCAP: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/video6 open: OK
> >>> test VIDIOC_QUERYCAP: OK
> >>> test VIDIOC_G/S_PRIORITY: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK
> >>> test VIDIOC_TRY_FMT: OK
> >>> test VIDIOC_S_FMT: OK
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> >>> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> >>> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> >>> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> >>> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/video6: 45, Succeeded: 44, Failed: 1, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/video7:
> >>>
> >>> Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Card type        : mtk-cam-p1
> >>> Bus info         : platform:1a000000.camisp
> >>> Driver version   : 4.19.89
> >>> Capabilities     : 0x84a00000
> >>> Metadata Capture
> >>> Streaming
> >>> Extended Pix Format
> >>> Device Capabilities
> >>> Device Caps      : 0x04a00000
> >>> Metadata Capture
> >>> Streaming
> >>> Extended Pix Format
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x0300002e
> >>> Type             : V4L Video
> >>> Entity Info:
> >>> ID               : 0x0000002c (44)
> >>> Name             : mtk-cam-p1 partial meta 2
> >>> Function         : V4L2 I/O
> >>> Pad 0x0100002d   : 0: Sink
> >>>   Link 0x02000030: from remote pad 0x1000007 of entity 'mtk-cam-p1': Data
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>> test VIDIOC_QUERYCAP: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/video7 open: OK
> >>> test VIDIOC_QUERYCAP: OK
> >>> test VIDIOC_G/S_PRIORITY: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK
> >>> test VIDIOC_TRY_FMT: OK
> >>> test VIDIOC_S_FMT: OK
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> >>> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> >>> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> >>> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> >>> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/video7: 45, Succeeded: 44, Failed: 1, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/video8:
> >>>
> >>> Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Card type        : mtk-cam-p1
> >>> Bus info         : platform:1a000000.camisp
> >>> Driver version   : 4.19.89
> >>> Capabilities     : 0x84a00000
> >>> Metadata Capture
> >>> Streaming
> >>> Extended Pix Format
> >>> Device Capabilities
> >>> Device Caps      : 0x04a00000
> >>> Metadata Capture
> >>> Streaming
> >>> Extended Pix Format
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000034
> >>> Type             : V4L Video
> >>> Entity Info:
> >>> ID               : 0x00000032 (50)
> >>> Name             : mtk-cam-p1 partial meta 3
> >>> Function         : V4L2 I/O
> >>> Pad 0x01000033   : 0: Sink
> >>>   Link 0x02000036: from remote pad 0x1000008 of entity 'mtk-cam-p1': Data
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>> test VIDIOC_QUERYCAP: OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/video8 open: OK
> >>> test VIDIOC_QUERYCAP: OK
> >>> test VIDIOC_G/S_PRIORITY: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK
> >>> test VIDIOC_TRY_FMT: OK
> >>> test VIDIOC_S_FMT: OK
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> >>> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> >>> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> >>> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> >>> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK
> >>>
> >>> Total for mtk-cam-p1 device /dev/video8: 45, Succeeded: 44, Failed: 1, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/v4l-subdev0:
> >>>
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000050
> >>> Type             : V4L Sub-Device
> >>> Entity Info:
> >>> ID               : 0x00000001 (1)
> >>> Name             : mtk-cam-p1
> >>> Function         : Video Pixel Formatter
> >>> Pad 0x01000002   : 0: Sink
> >>>   Link 0x02000012: from remote pad 0x100000f of entity 'mtk-cam-p1 meta input': Data
> >>> Pad 0x01000003   : 1: Source
> >>>   Link 0x02000018: to remote pad 0x1000015 of entity 'mtk-cam-p1 main stream': Data, Enabled, Immutable
> >>> Pad 0x01000004   : 2: Source
> >>>   Link 0x0200001e: to remote pad 0x100001b of entity 'mtk-cam-p1 packed out': Data
> >>> Pad 0x01000005   : 3: Source
> >>>   Link 0x02000024: to remote pad 0x1000021 of entity 'mtk-cam-p1 partial meta 0': Data
> >>> Pad 0x01000006   : 4: Source
> >>>   Link 0x0200002a: to remote pad 0x1000027 of entity 'mtk-cam-p1 partial meta 1': Data
> >>> Pad 0x01000007   : 5: Source
> >>>   Link 0x02000030: to remote pad 0x100002d of entity 'mtk-cam-p1 partial meta 2': Data
> >>> Pad 0x01000008   : 6: Source
> >>>   Link 0x02000036: to remote pad 0x1000033 of entity 'mtk-cam-p1 partial meta 3': Data
> >>> Pad 0x01000009   : 7: Source
> >>> Pad 0x0100000a   : 8: Source
> >>> Pad 0x0100000b   : 9: Source
> >>> Pad 0x0100000c   : 10: Source
> >>> Pad 0x0100000d   : 11: Sink
> >>>   Link 0x0200004e: from remote pad 0x100003d of entity '1a040000.seninf': Data, Enabled, Immutable
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/v4l-subdev0 open: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Sink Pad 0):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 1):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 2):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 3):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 4):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 5):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 6):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 7):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 8):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 9):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 10):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Sink Pad 11):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >>> test VIDIOC_QUERYCTRL: OK (Not Supported)
> >>> test VIDIOC_G/S_CTRL: OK (Not Supported)
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 0 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK (Not Supported)
> >>> test VIDIOC_TRY_FMT: OK (Not Supported)
> >>> test VIDIOC_S_FMT: OK (Not Supported)
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK (Not Supported)
> >>>
> >>> Total for mtk-cam-p1 device /dev/v4l-subdev0: 125, Succeeded: 125, Failed: 0, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/v4l-subdev1:
> >>>
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000052
> >>> Type             : V4L Sub-Device
> >>> Entity Info:
> >>> ID               : 0x00000038 (56)
> >>> Name             : 1a040000.seninf
> >>> Function         : Video Interface Bridge
> >>> Pad 0x01000039   : 0: Sink
> >>>   Link 0x02000047: from remote pad 0x1000046 of entity 'ov8856 2-0010': Data, Enabled
> >>> Pad 0x0100003a   : 1: Sink
> >>>   Link 0x0200004c: from remote pad 0x100004b of entity 'ov02a10 4-003d': Data
> >>> Pad 0x0100003b   : 2: Sink
> >>> Pad 0x0100003c   : 3: Sink
> >>> Pad 0x0100003d   : 4: Source
> >>>   Link 0x0200004e: to remote pad 0x100000d of entity 'mtk-cam-p1': Data, Enabled, Immutable
> >>> Pad 0x0100003e   : 5: Source
> >>> Pad 0x0100003f   : 6: Source
> >>> Pad 0x01000040   : 7: Source
> >>> Pad 0x01000041   : 8: Source
> >>> Pad 0x01000042   : 9: Source
> >>> Pad 0x01000043   : 10: Source
> >>> Pad 0x01000044   : 11: Source
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/v4l-subdev1 open: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Sink Pad 0):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Sink Pad 1):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Sink Pad 2):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Sink Pad 3):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 4):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 5):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 6):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 7):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 8):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 9):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 10):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 11):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> >>> test VIDIOC_QUERYCTRL: OK
> >>> test VIDIOC_G/S_CTRL: OK
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 2 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK (Not Supported)
> >>> test VIDIOC_TRY_FMT: OK (Not Supported)
> >>> test VIDIOC_S_FMT: OK (Not Supported)
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK (Not Supported)
> >>>
> >>> Total for mtk-cam-p1 device /dev/v4l-subdev1: 125, Succeeded: 125, Failed: 0, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/v4l-subdev2:
> >>>
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000054
> >>> Type             : V4L Sub-Device
> >>> Entity Info:
> >>> ID               : 0x00000045 (69)
> >>> Name             : ov8856 2-0010
> >>> Function         : Camera Sensor
> >>> Pad 0x01000046   : 0: Source
> >>>   Link 0x02000047: to remote pad 0x1000039 of entity '1a040000.seninf': Data, Enabled
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/v4l-subdev2 open: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 0):
> >>> fail: v4l2-test-subdevs.cpp(147): doioctl(node, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, &fse)
> >>> fail: v4l2-test-subdevs.cpp(248): ret && ret != ENOTTY
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
> >>> fail: v4l2-test-subdevs.cpp(313): fmt.code == 0 || fmt.code == ~0U
> >>> fail: v4l2-test-subdevs.cpp(356): checkMBusFrameFmt(node, fmt.format)
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: FAIL
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> fail: v4l2-test-subdevs.cpp(147): doioctl(node, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, &fse)
> >>> fail: v4l2-test-subdevs.cpp(248): ret && ret != ENOTTY
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> >>> test VIDIOC_QUERYCTRL: OK
> >>> test VIDIOC_G/S_CTRL: OK
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> >>> fail: v4l2-test-controls.cpp(830): subscribe event for control 'User Controls' failed
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 11 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK (Not Supported)
> >>> test VIDIOC_TRY_FMT: OK (Not Supported)
> >>> test VIDIOC_S_FMT: OK (Not Supported)
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK (Not Supported)
> >>>
> >>> Total for mtk-cam-p1 device /dev/v4l-subdev2: 48, Succeeded: 44, Failed: 4, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/v4l-subdev3:
> >>>
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000056
> >>> Type             : V4L Sub-Device
> >>> Entity Info:
> >>> ID               : 0x00000049 (73)
> >>> Name             : dw9768 2-000c
> >>> Function         : Lens Controller
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/v4l-subdev3 open: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> >>> test VIDIOC_QUERYCTRL: OK
> >>> test VIDIOC_G/S_CTRL: OK
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> >>> fail: v4l2-test-controls.cpp(830): subscribe event for control 'Camera Controls' failed
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 2 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK (Not Supported)
> >>> test VIDIOC_TRY_FMT: OK (Not Supported)
> >>> test VIDIOC_S_FMT: OK (Not Supported)
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK (Not Supported)
> >>>
> >>> Total for mtk-cam-p1 device /dev/v4l-subdev3: 41, Succeeded: 40, Failed: 1, Warnings: 0
> >>> --------------------------------------------------------------------------------
> >>> Compliance test for mtk-cam-p1 device /dev/v4l-subdev4:
> >>>
> >>> Media Driver Info:
> >>> Driver name      : mtk-cam-p1
> >>> Model            : mtk-cam-p1
> >>> Serial           :
> >>> Bus info         : platform:1a000000.camisp
> >>> Media version    : 4.19.89
> >>> Hardware revision: 0x00000000 (0)
> >>> Driver version   : 4.19.89
> >>> Interface Info:
> >>> ID               : 0x03000058
> >>> Type             : V4L Sub-Device
> >>> Entity Info:
> >>> ID               : 0x0000004a (74)
> >>> Name             : ov02a10 4-003d
> >>> Function         : Camera Sensor
> >>> Pad 0x0100004b   : 0: Source
> >>>   Link 0x0200004c: to remote pad 0x100003a of entity '1a040000.seninf': Data
> >>>
> >>> Required ioctls:
> >>> test MC information (see 'Media Driver Info' above): OK
> >>>
> >>> Allow for multiple opens:
> >>> test second /dev/v4l-subdev4 open: OK
> >>> test for unlimited opens: OK
> >>>
> >>> Debug ioctls:
> >>> test VIDIOC_LOG_STATUS: OK (Not Supported)
> >>>
> >>> Input ioctls:
> >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >>> Inputs: 0 Audio Inputs: 0 Tuners: 0
> >>>
> >>> Output ioctls:
> >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >>> Outputs: 0 Audio Outputs: 0 Modulators: 0
> >>>
> >>> Input/Output configuration ioctls:
> >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >>> test VIDIOC_G/S_EDID: OK (Not Supported)
> >>>
> >>> Sub-Device ioctls (Source Pad 0):
> >>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> >>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> >>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> >>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >>>
> >>> Control ioctls:
> >>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> >>> test VIDIOC_QUERYCTRL: OK
> >>> fail: v4l2-test-controls.cpp(362): returned control value out of range
> >>> fail: v4l2-test-controls.cpp(431): invalid control 009e0902
> >>> test VIDIOC_G/S_CTRL: FAIL
> >>> fail: v4l2-test-controls.cpp(549): returned control value out of range
> >>> fail: v4l2-test-controls.cpp(665): invalid control 009e0902
> >>> test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
> >>> fail: v4l2-test-controls.cpp(830): subscribe event for control 'User Controls' failed
> >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >>> Standard Controls: 10 Private Controls: 0
> >>>
> >>> Format ioctls:
> >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> >>> test VIDIOC_G/S_PARM: OK (Not Supported)
> >>> test VIDIOC_G_FBUF: OK (Not Supported)
> >>> test VIDIOC_G_FMT: OK (Not Supported)
> >>> test VIDIOC_TRY_FMT: OK (Not Supported)
> >>> test VIDIOC_S_FMT: OK (Not Supported)
> >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >>> test Cropping: OK (Not Supported)
> >>> test Composing: OK (Not Supported)
> >>> test Scaling: OK (Not Supported)
> >>>
> >>> Codec ioctls:
> >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >>>
> >>> Buffer ioctls:
> >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> >>> test VIDIOC_EXPBUF: OK (Not Supported)
> >>> test Requests: OK (Not Supported)
> >>>
> >>> Total for mtk-cam-p1 device /dev/v4l-subdev4: 48, Succeeded: 45, Failed: 3, Warnings: 0
> >>>
> >>> Grand Total for mtk-cam-p1 device /dev/media2: 709, Succeeded: 694, Failed: 15, Warnings: 0
> >>>
> >>>
> >>> Jungo Lin (5):
> >>>   media: dt-bindings: mt8183: Added camera ISP Pass 1
> >>>   dts: arm64: mt8183: Add ISP Pass 1 nodes
> >>>   media: videodev2.h: Add new boottime timestamp type
> >>>   media: platform: Add Mediatek ISP P1 image & meta formats
> >>>   media: platform: Add Mediatek ISP P1 V4L2 device driver
> >>>
> >>>  .../bindings/media/mediatek,camisp.txt        |   83 +
> >>>  Documentation/media/uapi/v4l/buffer.rst       |   11 +-
> >>>  .../media/uapi/v4l/pixfmt-mtisp-sbggr10.rst   |   65 +
> >>>  .../media/uapi/v4l/pixfmt-mtisp-sbggr10f.rst  |   90 +
> >>>  .../media/uapi/v4l/pixfmt-mtisp-sbggr12.rst   |   61 +
> >>>  .../media/uapi/v4l/pixfmt-mtisp-sbggr12f.rst  |  110 +
> >>>  .../media/uapi/v4l/pixfmt-mtisp-sbggr14.rst   |   73 +
> >>>  .../media/uapi/v4l/pixfmt-mtisp-sbggr14f.rst  |  110 +
> >>>  .../media/uapi/v4l/pixfmt-mtisp-sbggr8.rst    |   51 +
> >>>  .../media/uapi/v4l/pixfmt-mtisp-sbggr8f.rst   |   78 +
> >>>  arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   38 +
> >>>  drivers/media/platform/Kconfig                |    1 +
> >>>  drivers/media/platform/Makefile               |    1 +
> >>>  drivers/media/platform/mtk-isp/Kconfig        |   20 +
> >>>  .../media/platform/mtk-isp/isp_50/Makefile    |    3 +
> >>>  .../platform/mtk-isp/isp_50/cam/Makefile      |    6 +
> >>>  .../platform/mtk-isp/isp_50/cam/mtk_cam-hw.c  |  636 +++++
> >>>  .../platform/mtk-isp/isp_50/cam/mtk_cam-hw.h  |   64 +
> >>>  .../platform/mtk-isp/isp_50/cam/mtk_cam-ipi.h |  222 ++
> >>>  .../mtk-isp/isp_50/cam/mtk_cam-regs.h         |   95 +
> >>>  .../platform/mtk-isp/isp_50/cam/mtk_cam.c     | 2087 +++++++++++++++++
> >>>  .../platform/mtk-isp/isp_50/cam/mtk_cam.h     |  244 ++
> >>>  drivers/media/v4l2-core/v4l2-ioctl.c          |   37 +
> >>>  include/uapi/linux/videodev2.h                |   41 +
> >>>  24 files changed, 4226 insertions(+), 1 deletion(-)
> >>>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,camisp.txt
> >>>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr10.rst
> >>>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr10f.rst
> >>>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr12.rst
> >>>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr12f.rst
> >>>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr14.rst
> >>>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr14f.rst
> >>>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr8.rst
> >>>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr8f.rst
> >>>  create mode 100644 drivers/media/platform/mtk-isp/Kconfig
> >>>  create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile
> >>>  create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/Makefile
> >>>  create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-hw.c
> >>>  create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-hw.h
> >>>  create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-ipi.h
> >>>  create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-regs.h
> >>>  create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam.c
> >>>  create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam.h
> >>>
> >>
> >> _______________________________________________
> >> Linux-mediatek mailing list
> >> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> >> http://lists.infradead.org/mailman/listinfo/linux-mediatek