Hi Jungo,
I was taking a look at this patchset, please see my comments below.
On 12/19/19 3:49 AM, Jungo Lin wrote:
> Hello,
>
> This patch series adding the driver for Pass 1 (P1) unit in
> Mediatek's camera ISP system on mt8183 SoC, which will be used in
> camera features of CrOS.
>
> Pass 1 unit processes image signal from sensor devices and accepts the
> tuning parameters to adjust the image quality. It performs optical
> black correction, defect pixel correction, W/IR imbalance correction
> and lens shading correction for RAW processing.
>
> The driver is implemented with V4L2 and media controller framework so
> we have the following entities to describe the ISP pass 1 path.
>
> (The current metadata interface used in meta input and partial meta
> nodes is only a temporary solution to kick off the driver development
> and is not ready to be reviewed yet.)
>
> 1. meta input (output video device): connect to ISP P1 sub device.
> It accepts the tuning buffer from user.
>
> 2. ISP P1 (sub device): connect to partial meta 0/1/2/3,
> main stream and packed out video devices. When processing an image,
> Pass 1 hardware supports multiple output images with different sizes
> and formats so it needs two capture video devices ("main stream" and
> "packed out") to return the image data to the user.
>
> 3. main stream (capture video device): return the processed image data
> which is used in capture scenario.
>
> 4. packed out (capture video device): return the processed image data
> which is used in preview scenario.
>
> 5. partial meta 0 (capture video device): return the AE/AWB statistics.
>
> 6. partial meta 1 (capture video device): return the AF statistics.
>
> 7. partial meta 2 (capture video device): return the local contrast
> enhanced statistics.
>
> 8. partial meta 3 (capture video device): return the local motion
> vector statistics.
>
> The overall patches of the series is:
>
> * Patch 1 & 2 are dt-bindings & dts information related to ISP P1 driver.
> * Patch 3 adds new timestamp type for Camera AR (Augmented Reality) application
> * Patch 4 extends the original V4L2 image & meta formats for ISP P1 driver.
> * Patch 5 is the heart of ISP P1 driver. It handles the ISP HW configuration.
> Moreover, implement standard V4L2 video driver that utilizes
> V4L2 and media framework APIs. Communicate with co-process via SCP
> communication to compose ISP registers in the firmware.
>
> Here is ISP P1 media topology:
> It is included the main/sub sensor, sen-inf sub-devices and len device
> which are implemented in below patch[1][2][3][4]:
I would be nice if you could provide a branch with those applied.
>
> For Mediatek ISP P1 driver, it also depends on MT8183 SCP[5] & IOMMU[6]
> patch sets.
>
> /usr/bin/media-ctl -p -d /dev/media2
>
> Media controller API version 4.19.89
>
> Media device information
> ------------------------
> driver mtk-cam-p1
> model mtk-cam-p1
> serial
> bus info platform:1a000000.camisp
> hw revision 0x0
> driver version 4.19.89
>
> Device topology
> - entity 1: mtk-cam-p1 (12 pads, 8 links)
If I understand correctly, the hardware supports 3 ISP instances, A, B, and C, and only B is being used.
Is this correct?
So maybe, rename it to mtk-isp-p1-b, to allow mtk-isp-p1-a and mtk-isp-p1-c to be added in the future.
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev0
> pad0: Sink
> <- "mtk-cam-p1 meta input":0 []
I would prefer the name params, or parameters, since input/output is confusing, since this is a output video node.
> pad1: Source
> -> "mtk-cam-p1 main stream":0 [ENABLED,IMMUTABLE]
Is there any reason for this link to be IMMUTABLE? Can't a use "mtk-cam-p1 packed out" without configuring "mtk-cam-p1 main stream" ?
> pad2: Source
> -> "mtk-cam-p1 packed out":0 []
Same here, maybe "packed stream" ? Just for curiosity, why is it called packed?
> pad3: Source
> -> "mtk-cam-p1 partial meta 0":0 []
> pad4: Source
> -> "mtk-cam-p1 partial meta 1":0 []
> pad5: Source
> -> "mtk-cam-p1 partial meta 2":0 []
> pad6: Source
> -> "mtk-cam-p1 partial meta 3":0 []
Shouldn't those links be [ENABLED,IMMUTABLE] ?
It would be better to have a more intuitive naming, e.g. "mtk-cam-p1 AE/AWB stats", "mtk-cam-p1 AF stats",
"mtk-cam-p1 contrast stats", "mtk-cam-p1 motion stats", what do you think?
I also would prefer to remove blank spaces.
And maybe the prefix could be mtkisp-p1 ? (just to be similar with rkisp1), but I don't have strong feelings about this.
> pad7: Source
> pad8: Source
> pad9: Source
> pad10: Source
Why source pads that are not connected to anything? (I guess I need to check the last patch better).
Regards,
Helen
> pad11: Sink
> <- "1a040000.seninf":4 [ENABLED,IMMUTABLE]
>
> - entity 14: mtk-cam-p1 meta input (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video2
> pad0: Source
> -> "mtk-cam-p1":0 []
>
> - entity 20: mtk-cam-p1 main stream (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video3
> pad0: Sink
> <- "mtk-cam-p1":1 [ENABLED,IMMUTABLE]
>
> - entity 26: mtk-cam-p1 packed out (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video4
> pad0: Sink
> <- "mtk-cam-p1":2 []
>
> - entity 32: mtk-cam-p1 partial meta 0 (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video5
> pad0: Sink
> <- "mtk-cam-p1":3 []
>
> - entity 38: mtk-cam-p1 partial meta 1 (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video6
> pad0: Sink
> <- "mtk-cam-p1":4 []
>
> - entity 44: mtk-cam-p1 partial meta 2 (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video7
> pad0: Sink
> <- "mtk-cam-p1":5 []
>
> - entity 50: mtk-cam-p1 partial meta 3 (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video8
> pad0: Sink
> <- "mtk-cam-p1":6 []
>
> - entity 56: 1a040000.seninf (12 pads, 3 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev1
> pad0: Sink
> [fmt:SGRBG10_1X10/3264x2448 field:none colorspace:srgb]
> <- "ov8856 2-0010":0 [ENABLED]
> pad1: Sink
> [fmt:SRGGB10_1X10/1600x1200 field:none colorspace:srgb]
> <- "ov02a10 4-003d":0 []
> pad2: Sink
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> pad3: Sink
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> pad4: Source
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> -> "mtk-cam-p1":11 [ENABLED,IMMUTABLE]
> pad5: Source
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> pad6: Source
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> pad7: Source
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> pad8: Source
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> pad9: Source
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> pad10: Source
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> pad11: Source
> [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
>
> - entity 69: ov8856 2-0010 (1 pad, 1 link)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev2
> pad0: Source
> [fmt:SBGGR10_1X10/3264x2448 field:none colorspace:unknown ycbcr:709]
> -> "1a040000.seninf":0 [ENABLED]
>
> - entity 73: dw9768 2-000c (0 pad, 0 link)
> type V4L2 subdev subtype Lens flags 0
> device node name /dev/v4l-subdev3
>
> - entity 74: ov02a10 4-003d (1 pad, 1 link)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev4
> pad0: Source
> [fmt:SRGGB10_1X10/1600x1200 field:none]
> -> "1a040000.seninf":1 []
>
> ===========
> = history =
> ===========
>
> version 6:
> - Add port node description in the dt-binding document and device tree
> by Tomasz Figa.
> - Remove RGB format definitions in pixfmt-rgb.rst for kernel v5.5-rc1
> version.
> - Revise help description for VIDEO_MEDIATEK_ISP_PASS1.
> - Apply SCP v21 change in P1 driver by Pi-Hsun Shih.
> - Correct auto suspend timer value for suspend/resume issue.
> - Increase IPI guard timer to 1 second to avoid false alarm command
> timeout event.
> - Fix KE due to no sen-inf sub-device.
>
> Todo:
> - vb2_ops's buf_request_complete callback function implementation.
> - Add rst documents for Mediatek meta formats.
> - New meta buffer structure design & re-factoring.
>
> version 5:
> - Fixed Rob's comment on dt-binding format
> - Fix Tomasz's comment in mtk_isp_pm_suspend function
> - Support V4L2_BUF_FLAG_TIMESTAMP_BOOTTIME timestamp flag
> and new timestamp type in driver
> - Fix buffer en-queue timing issue in v4
> - Remove default link_notify callback function in mtk_cam_media_ops
>
> Todo:
> - vb2_ops's buf_request_complete callback function implementation
> - Add rst documents for Mediatek meta formats
> - New meta buffer structure design & re-factoring
> - Align and pack IPI command structures for EC ROM size shrink
>
> version 4:
> - Fix Tomasz's comments which are addressed in MTK ISP P1 driver v3
> patch[4]
> - Fix some Tomasz comments which are addressed in DIP's v2 patch[5]
> - Extend Mediatek proprietary image formats to support bayer order
> - Support V4L2_BUF_FLAG_TSTAMP_SRC_SOE for capture devices
>
> Todo:
> - vb2_ops's buf_request_complete callback function implementation
> - Add rst documents for Mediatek meta formats
> - New meta buffer structure design & re-factoring
> - Support V4L2_BUF_FLAG_TIMESTAMP_BOOTTIME timestamp flag
> - Align and pack IPI command structures for EC ROM size shrink
>
> version 3:
> - Remove ISP Pass 1 reserved memory device node and change to use SCP's
> reserved memory region. (Rob Herring)
> - Fix comments of ISP Pass 1 device node & dt-bindings document (Rob Herring)
> - Revise ISP Pass1 Kconfig
> - Add rst documents for Mediatek image formats (Hans Verkuil)
> - Fix kernel warning messages when running v4l2_compliance test
> - Move AFO buffer enqueue & de-queue from request API to non-request
> - mtk_cam-ctrl.h/mtk_cam-ctrl.c
> Revise Mediatek ISP Pass1 specific V4L2 control naming & file licence
> declaration (Hans Verkuil)
> Split GET_BIN_INFO control into two controls to get width & height
> in-dependently (Hans Verkuil)
> - mtk_cam-v4l2-util.h/mtk_cam-v4l2-util.c
> Merging mtk_cam-dev.c and mtk_cam-v4l2-util.c. (Drew Davenport)
> Remove the pix_mode argument in related functions and unreachable code. (Drew Davenport)
> Fix Drew's comments which are addressed in v2 patch
> Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> - mtk_cam-regs.h / mtk_cam.h / mtk_cam.c
> Fix Drew's comments which are addressed in v2 patch
> Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> Refactoring mtk_isp_config & mtk_isp_req_enqueue functions
> - mtk_cam-scp.h / mtk_cam-scp.c
> Move function declarations from mtk_cam.h to mtk_cam-scp.h (Drew Davenport)
> Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> Fix ISP de-initialize timing KE issue
> - mtk_cam-smem.h / mtk_cam-smem-dev.c
> Get the reserved shared memory via SCP driver (Tomasz Figa)
>
> Todo:
> - Add rst documents for Mediatek meta formats
> - New meta buffer structure design & re-factoring
>
> version 2:
> - Add 3A enhancement feature which includes:
> Separates 3A pipeline out of frame basis to improve
> AE/AWB (exposure and white balance) performance.
> Add 2 SCP sub-commands for 3A meta buffers.
> - Add new child device to manage P1 shared memory between P1 HW unit
> and co-processor.
> - Remove mediatek,cam_smem.txt & cam_smem dts node in mt8183.dtsi.
> - Revised document wording for dt-bindings documents & dts information.
> - Remove mtk_cam-ctx.h & mtk_cam-dev-ctx-core.c and move these
> source codes to mtk_cam-dev.h & mtk_cam-dev.c.
> - mtk_cam-dev.h / mtk_cam-dev.c
> Revised mtk_cam_video_device & mtk_cam_dev to remove unused structure fields
> or add comments.
> Revised buffer size for LMVO & LCSO.
> Fix pixel format utility function.
> Add vb2_dma_contig_set_max_seg_size to configure DMA max segment size.
> - mtk_cam-v4l2-util.c
> Refactoring V4L2 async mechanism with seninf driver only
> Refactoring CIO (Connection IO) implementation with active sensor
> Revised stream on function for 3A enhancement feature
> Add new V4L2 en-queue/de-queue utility functions for 3A enhancement feature
> - mtk_cam-regs.h / mtk_cam.h / mtk_cam.c
> Add meta buffer index register definitions
> Add meta DMA configuration function.
> Separate with frame-base and non-frame-base en-queue/de-queue functions
> Add isp_setup_scp_rproc function to get RPC handle
> Add mtk_cam_reserved_memory_init for shared memory management
> - mtk_cam-scp.h / mtk_cam-scp.c
> Add new meta strictures for 3A enhancement feature
> Add new IPI command utility function for 3A enhancement feature
> Enhance isp_composer_dma_sg_init function flow
> Shorten overall IPI command structure size
> Remove scp_state state checking
> Improve code readability
> - mtk_cam-smem.h / mtk_cam-smem-dev.c
> Add mtk_cam_alloc_smem_dev to allocate one new child device of ISP driver.
> Handling P1 driver 's reserved memory & allocate DMA buffers based on this
> memory region.
>
> TODOs:
> - 3A enhancement feature bug fixing
>
> version 1:
> - Revised driver sources based on Tomasz's comments including
> part1/2/3/4 in RFC V0 patch.
> - Remove DMA cache mechanism.
> Support two new video devices (LCSO/LMVO) for advance camera
> features.
> - Fixed v4l2-compliance test failure items.
> - Add private controls for Mediatek camera middle-ware.
> - Replace VPU driver's APIs with new SCP driver interface for
> co-processor communication.
> - Refactoring mtk_cam_scp.c to use ring-buffers mechanism for IPI
> commands RX handling.
> - Fix internal bugs.
>
> TODOs:
> - Remove mtk_cam_smem_drv.c & mtk_cam_smem.h and implement DMA pool
> for shared memory management.
> - Revised file names.
> - Support non frame-sync AFO/AAO DMA buffers
>
> version 0:
> - Initial submission
>
> ==================
> Dependent patch set
> ==================
>
> Camera ISP P1 driver depends on seninf driver, SCP driver.
> The patches are listed as following:
>
> [1]. media: support Mediatek sensor interface driver
> https://patchwork.kernel.org/cover/11145845/
>
> [2]. media: ov8856: Add YAML binding and sensor mode support
> https://patchwork.kernel.org/cover/11220785/
>
> [3]. media: i2c: Add support for OV02A10 sensor
> https://patchwork.kernel.org/cover/11284779/
>
> [4]. media: i2c: add support for DW9768 VCM driver
> https://patchwork.kernel.org/cover/11132299/
>
> [5]. Add support for mt8183 SCP
> https://patchwork.kernel.org/cover/11239065/
>
> [6]. MT8183 IOMMU SUPPORT
> https://patchwork.kernel.org/cover/11112765/
>
> ==================
> Compliance test
> ==================
>
> The v4l2-compliance is built with the below lastest patch.
> https://git.linuxtv.org/v4l-utils.git/commit/?id=e9a7593ec6ae98704ecb35ea64948d34c23a5158
>
> Note 1.
> This testing depends on the above seninf, sensors and len patches[1][2][3][4].
>
> Note 2.
> For failed test csaes in video2~8, it is caused by new V4L2 timestamp
> called V4L2_BUF_FLAG_TIMESTAMP_BOOTIME.
>
> Note 3.
> The current some failure items are related to Mediatek sensors/len driver [2][3][3]
>
> /usr/bin/v4l2-compliance -m /dev/media2
>
> v4l2-compliance SHA: not available, 32 bits
>
> Compliance test for mtk-cam-p1 device /dev/media1:
>
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.67
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.67
>
> Required ioctls:
> test MEDIA_IOC_DEVICE_INFO: OK
>
> Allow for multiple opens:
> test second /dev/media1 open: OK
> test MEDIA_IOC_DEVICE_INFO: OK
> test for unlimited opens: OK
>
> Media Controller ioctls:
> test MEDIA_IOC_G_TOPOLOGY: OK
> Entities: 11 Interfaces: 11 Pads: 33 Links: 21
> test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
> test MEDIA_IOC_SETUP_LINK: OK
>
> Total for mtk-cam-p1 device /dev/media1: 7, Succeeded: 7, Failed: 0, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/video25:
>
> Driver Info:
> Driver name : mtk-cam-p1
> Card type : mtk-cam-p1
> Bus info : platform:1a000000.camisp
> Driver version : 4.19.67
> Capabilities : 0x8c200000
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x0c200000
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.67
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.67
> Interface Info:
> ID : 0x03000010
> Type : V4L Video
> Entity Info:
> ID : 0x0000000e (14)
> Name : mtk-cam-p1 meta input
> Function : V4L2 I/O
> Pad 0x0100000f : 0: Source
> Link 0x02000012: to remote pad 0x1000002 of entity 'mtk-cam-p1': Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video25 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composiv4l2-compliance SHA: not available, 32 bits
>
> Compliance test for mtk-cam-p1 device /dev/media2:
>
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
>
> Required ioctls:
> test MEDIA_IOC_DEVICE_INFO: OK
>
> Allow for multiple opens:
> test second /dev/media2 open: OK
> test MEDIA_IOC_DEVICE_INFO: OK
> test for unlimited opens: OK
>
> Media Controller ioctls:
> test MEDIA_IOC_G_TOPOLOGY: OK
> Entities: 12 Interfaces: 12 Pads: 33 Links: 22
> test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
> test MEDIA_IOC_SETUP_LINK: OK
>
> Total for mtk-cam-p1 device /dev/media2: 7, Succeeded: 7, Failed: 0, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/video2:
>
> Driver Info:
> Driver name : mtk-cam-p1
> Card type : mtk-cam-p1
> Bus info : platform:1a000000.camisp
> Driver version : 4.19.89
> Capabilities : 0x8c200000
> Metadata Output
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x0c200000
> Metadata Output
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000010
> Type : V4L Video
> Entity Info:
> ID : 0x0000000e (14)
> Name : mtk-cam-p1 meta input
> Function : V4L2 I/O
> Pad 0x0100000f : 0: Source
> Link 0x02000012: to remote pad 0x1000002 of entity 'mtk-cam-p1': Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video2 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK
>
> Total for mtk-cam-p1 device /dev/video2: 45, Succeeded: 44, Failed: 1, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/video3:
>
> Driver Info:
> Driver name : mtk-cam-p1
> Card type : mtk-cam-p1
> Bus info : platform:1a000000.camisp
> Driver version : 4.19.89
> Capabilities : 0x84201000
> Video Capture Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04201000
> Video Capture Multiplanar
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000016
> Type : V4L Video
> Entity Info:
> ID : 0x00000014 (20)
> Name : mtk-cam-p1 main stream
> Function : V4L2 I/O
> Pad 0x01000015 : 0: Sink
> Link 0x02000018: from remote pad 0x1000003 of entity 'mtk-cam-p1': Data, Enabled, Immutable
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video3 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK
>
> Total for mtk-cam-p1 device /dev/video3: 45, Succeeded: 44, Failed: 1, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/video4:
>
> Driver Info:
> Driver name : mtk-cam-p1
> Card type : mtk-cam-p1
> Bus info : platform:1a000000.camisp
> Driver version : 4.19.89
> Capabilities : 0x84201000
> Video Capture Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04201000
> Video Capture Multiplanar
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x0300001c
> Type : V4L Video
> Entity Info:
> ID : 0x0000001a (26)
> Name : mtk-cam-p1 packed out
> Function : V4L2 I/O
> Pad 0x0100001b : 0: Sink
> Link 0x0200001e: from remote pad 0x1000004 of entity 'mtk-cam-p1': Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video4 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK
>
> Total for mtk-cam-p1 device /dev/video4: 45, Succeeded: 44, Failed: 1, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/video5:
>
> Driver Info:
> Driver name : mtk-cam-p1
> Card type : mtk-cam-p1
> Bus info : platform:1a000000.camisp
> Driver version : 4.19.89
> Capabilities : 0x84a00000
> Metadata Capture
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04a00000
> Metadata Capture
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000022
> Type : V4L Video
> Entity Info:
> ID : 0x00000020 (32)
> Name : mtk-cam-p1 partial meta 0
> Function : V4L2 I/O
> Pad 0x01000021 : 0: Sink
> Link 0x02000024: from remote pad 0x1000005 of entity 'mtk-cam-p1': Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video5 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK
>
> Total for mtk-cam-p1 device /dev/video5: 45, Succeeded: 44, Failed: 1, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/video6:
>
> Driver Info:
> Driver name : mtk-cam-p1
> Card type : mtk-cam-p1
> Bus info : platform:1a000000.camisp
> Driver version : 4.19.89
> Capabilities : 0x84a00000
> Metadata Capture
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04a00000
> Metadata Capture
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000028
> Type : V4L Video
> Entity Info:
> ID : 0x00000026 (38)
> Name : mtk-cam-p1 partial meta 1
> Function : V4L2 I/O
> Pad 0x01000027 : 0: Sink
> Link 0x0200002a: from remote pad 0x1000006 of entity 'mtk-cam-p1': Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video6 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK
>
> Total for mtk-cam-p1 device /dev/video6: 45, Succeeded: 44, Failed: 1, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/video7:
>
> Driver Info:
> Driver name : mtk-cam-p1
> Card type : mtk-cam-p1
> Bus info : platform:1a000000.camisp
> Driver version : 4.19.89
> Capabilities : 0x84a00000
> Metadata Capture
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04a00000
> Metadata Capture
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x0300002e
> Type : V4L Video
> Entity Info:
> ID : 0x0000002c (44)
> Name : mtk-cam-p1 partial meta 2
> Function : V4L2 I/O
> Pad 0x0100002d : 0: Sink
> Link 0x02000030: from remote pad 0x1000007 of entity 'mtk-cam-p1': Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video7 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK
>
> Total for mtk-cam-p1 device /dev/video7: 45, Succeeded: 44, Failed: 1, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/video8:
>
> Driver Info:
> Driver name : mtk-cam-p1
> Card type : mtk-cam-p1
> Bus info : platform:1a000000.camisp
> Driver version : 4.19.89
> Capabilities : 0x84a00000
> Metadata Capture
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04a00000
> Metadata Capture
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000034
> Type : V4L Video
> Entity Info:
> ID : 0x00000032 (50)
> Name : mtk-cam-p1 partial meta 3
> Function : V4L2 I/O
> Pad 0x01000033 : 0: Sink
> Link 0x02000036: from remote pad 0x1000008 of entity 'mtk-cam-p1': Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video8 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK
>
> Total for mtk-cam-p1 device /dev/video8: 45, Succeeded: 44, Failed: 1, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/v4l-subdev0:
>
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000050
> Type : V4L Sub-Device
> Entity Info:
> ID : 0x00000001 (1)
> Name : mtk-cam-p1
> Function : Video Pixel Formatter
> Pad 0x01000002 : 0: Sink
> Link 0x02000012: from remote pad 0x100000f of entity 'mtk-cam-p1 meta input': Data
> Pad 0x01000003 : 1: Source
> Link 0x02000018: to remote pad 0x1000015 of entity 'mtk-cam-p1 main stream': Data, Enabled, Immutable
> Pad 0x01000004 : 2: Source
> Link 0x0200001e: to remote pad 0x100001b of entity 'mtk-cam-p1 packed out': Data
> Pad 0x01000005 : 3: Source
> Link 0x02000024: to remote pad 0x1000021 of entity 'mtk-cam-p1 partial meta 0': Data
> Pad 0x01000006 : 4: Source
> Link 0x0200002a: to remote pad 0x1000027 of entity 'mtk-cam-p1 partial meta 1': Data
> Pad 0x01000007 : 5: Source
> Link 0x02000030: to remote pad 0x100002d of entity 'mtk-cam-p1 partial meta 2': Data
> Pad 0x01000008 : 6: Source
> Link 0x02000036: to remote pad 0x1000033 of entity 'mtk-cam-p1 partial meta 3': Data
> Pad 0x01000009 : 7: Source
> Pad 0x0100000a : 8: Source
> Pad 0x0100000b : 9: Source
> Pad 0x0100000c : 10: Source
> Pad 0x0100000d : 11: Sink
> Link 0x0200004e: from remote pad 0x100003d of entity '1a040000.seninf': Data, Enabled, Immutable
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
>
> Allow for multiple opens:
> test second /dev/v4l-subdev0 open: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Sub-Device ioctls (Sink Pad 0):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 1):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 2):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 3):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 4):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 5):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 6):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 7):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 8):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 9):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 10):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Sink Pad 11):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK (Not Supported)
>
> Total for mtk-cam-p1 device /dev/v4l-subdev0: 125, Succeeded: 125, Failed: 0, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/v4l-subdev1:
>
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000052
> Type : V4L Sub-Device
> Entity Info:
> ID : 0x00000038 (56)
> Name : 1a040000.seninf
> Function : Video Interface Bridge
> Pad 0x01000039 : 0: Sink
> Link 0x02000047: from remote pad 0x1000046 of entity 'ov8856 2-0010': Data, Enabled
> Pad 0x0100003a : 1: Sink
> Link 0x0200004c: from remote pad 0x100004b of entity 'ov02a10 4-003d': Data
> Pad 0x0100003b : 2: Sink
> Pad 0x0100003c : 3: Sink
> Pad 0x0100003d : 4: Source
> Link 0x0200004e: to remote pad 0x100000d of entity 'mtk-cam-p1': Data, Enabled, Immutable
> Pad 0x0100003e : 5: Source
> Pad 0x0100003f : 6: Source
> Pad 0x01000040 : 7: Source
> Pad 0x01000041 : 8: Source
> Pad 0x01000042 : 9: Source
> Pad 0x01000043 : 10: Source
> Pad 0x01000044 : 11: Source
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
>
> Allow for multiple opens:
> test second /dev/v4l-subdev1 open: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Sub-Device ioctls (Sink Pad 0):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Sink Pad 1):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Sink Pad 2):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Sink Pad 3):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 4):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 5):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 6):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 7):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 8):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 9):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 10):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 11):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 2 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK (Not Supported)
>
> Total for mtk-cam-p1 device /dev/v4l-subdev1: 125, Succeeded: 125, Failed: 0, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/v4l-subdev2:
>
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000054
> Type : V4L Sub-Device
> Entity Info:
> ID : 0x00000045 (69)
> Name : ov8856 2-0010
> Function : Camera Sensor
> Pad 0x01000046 : 0: Source
> Link 0x02000047: to remote pad 0x1000039 of entity '1a040000.seninf': Data, Enabled
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
>
> Allow for multiple opens:
> test second /dev/v4l-subdev2 open: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 0):
> fail: v4l2-test-subdevs.cpp(147): doioctl(node, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, &fse)
> fail: v4l2-test-subdevs.cpp(248): ret && ret != ENOTTY
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
> fail: v4l2-test-subdevs.cpp(313): fmt.code == 0 || fmt.code == ~0U
> fail: v4l2-test-subdevs.cpp(356): checkMBusFrameFmt(node, fmt.format)
> test Try VIDIOC_SUBDEV_G/S_FMT: FAIL
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> fail: v4l2-test-subdevs.cpp(147): doioctl(node, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, &fse)
> fail: v4l2-test-subdevs.cpp(248): ret && ret != ENOTTY
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> fail: v4l2-test-controls.cpp(830): subscribe event for control 'User Controls' failed
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK (Not Supported)
>
> Total for mtk-cam-p1 device /dev/v4l-subdev2: 48, Succeeded: 44, Failed: 4, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/v4l-subdev3:
>
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000056
> Type : V4L Sub-Device
> Entity Info:
> ID : 0x00000049 (73)
> Name : dw9768 2-000c
> Function : Lens Controller
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
>
> Allow for multiple opens:
> test second /dev/v4l-subdev3 open: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> fail: v4l2-test-controls.cpp(830): subscribe event for control 'Camera Controls' failed
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 2 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK (Not Supported)
>
> Total for mtk-cam-p1 device /dev/v4l-subdev3: 41, Succeeded: 40, Failed: 1, Warnings: 0
> --------------------------------------------------------------------------------
> Compliance test for mtk-cam-p1 device /dev/v4l-subdev4:
>
> Media Driver Info:
> Driver name : mtk-cam-p1
> Model : mtk-cam-p1
> Serial :
> Bus info : platform:1a000000.camisp
> Media version : 4.19.89
> Hardware revision: 0x00000000 (0)
> Driver version : 4.19.89
> Interface Info:
> ID : 0x03000058
> Type : V4L Sub-Device
> Entity Info:
> ID : 0x0000004a (74)
> Name : ov02a10 4-003d
> Function : Camera Sensor
> Pad 0x0100004b : 0: Source
> Link 0x0200004c: to remote pad 0x100003a of entity '1a040000.seninf': Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
>
> Allow for multiple opens:
> test second /dev/v4l-subdev4 open: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 0):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> fail: v4l2-test-controls.cpp(362): returned control value out of range
> fail: v4l2-test-controls.cpp(431): invalid control 009e0902
> test VIDIOC_G/S_CTRL: FAIL
> fail: v4l2-test-controls.cpp(549): returned control value out of range
> fail: v4l2-test-controls.cpp(665): invalid control 009e0902
> test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
> fail: v4l2-test-controls.cpp(830): subscribe event for control 'User Controls' failed
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 10 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK (Not Supported)
>
> Total for mtk-cam-p1 device /dev/v4l-subdev4: 48, Succeeded: 45, Failed: 3, Warnings: 0
>
> Grand Total for mtk-cam-p1 device /dev/media2: 709, Succeeded: 694, Failed: 15, Warnings: 0
>
>
> Jungo Lin (5):
> media: dt-bindings: mt8183: Added camera ISP Pass 1
> dts: arm64: mt8183: Add ISP Pass 1 nodes
> media: videodev2.h: Add new boottime timestamp type
> media: platform: Add Mediatek ISP P1 image & meta formats
> media: platform: Add Mediatek ISP P1 V4L2 device driver
>
> .../bindings/media/mediatek,camisp.txt | 83 +
> Documentation/media/uapi/v4l/buffer.rst | 11 +-
> .../media/uapi/v4l/pixfmt-mtisp-sbggr10.rst | 65 +
> .../media/uapi/v4l/pixfmt-mtisp-sbggr10f.rst | 90 +
> .../media/uapi/v4l/pixfmt-mtisp-sbggr12.rst | 61 +
> .../media/uapi/v4l/pixfmt-mtisp-sbggr12f.rst | 110 +
> .../media/uapi/v4l/pixfmt-mtisp-sbggr14.rst | 73 +
> .../media/uapi/v4l/pixfmt-mtisp-sbggr14f.rst | 110 +
> .../media/uapi/v4l/pixfmt-mtisp-sbggr8.rst | 51 +
> .../media/uapi/v4l/pixfmt-mtisp-sbggr8f.rst | 78 +
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 38 +
> drivers/media/platform/Kconfig | 1 +
> drivers/media/platform/Makefile | 1 +
> drivers/media/platform/mtk-isp/Kconfig | 20 +
> .../media/platform/mtk-isp/isp_50/Makefile | 3 +
> .../platform/mtk-isp/isp_50/cam/Makefile | 6 +
> .../platform/mtk-isp/isp_50/cam/mtk_cam-hw.c | 636 +++++
> .../platform/mtk-isp/isp_50/cam/mtk_cam-hw.h | 64 +
> .../platform/mtk-isp/isp_50/cam/mtk_cam-ipi.h | 222 ++
> .../mtk-isp/isp_50/cam/mtk_cam-regs.h | 95 +
> .../platform/mtk-isp/isp_50/cam/mtk_cam.c | 2087 +++++++++++++++++
> .../platform/mtk-isp/isp_50/cam/mtk_cam.h | 244 ++
> drivers/media/v4l2-core/v4l2-ioctl.c | 37 +
> include/uapi/linux/videodev2.h | 41 +
> 24 files changed, 4226 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,camisp.txt
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr10.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr10f.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr12.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr12f.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr14.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr14f.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr8.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr8f.rst
> create mode 100644 drivers/media/platform/mtk-isp/Kconfig
> create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile
> create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/Makefile
> create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-hw.c
> create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-hw.h
> create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-ipi.h
> create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-regs.h
> create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam.c
> create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam.h
>
