Re: [RFC PATCH v11 6/9] media: tegra: Add Tegra210 Video input driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 5/2/20 3:46 PM, Sowjanya Komatineni wrote:

On 5/2/20 1:48 PM, Dmitry Osipenko wrote:
02.05.2020 19:55, Sowjanya Komatineni пишет:
Also stop stream ioctl request happens during suspend where both threads
will be stopped properly. done thread stop happens only after finishing
all outstanding buffers.
Do you mean that V4L core takes care of stopping the streami on suspend
and re-starting it on resume from suspend?

Stop stream request happens from streaming applications so even without
driver suspend/resume implementation currently, streaming will be
stopped prior to system  suspend where both threads will be stopped
properly (after finishing out standing buffers) and will be resumed by
application on system resume
All userspace is frozen on suspend. System suspension is transparent for
userspace applications. I'm not sure what you're meaning here.

Also tested suspending while streaming with this unconditional freeze, I don't see any issue as application stops stream where v4l_streamoff gets
executed during suspend and on resume streaming starts where
v4l_streamon happens.

So, I don't see any issue with existing implementation of unconditional
freeze.
I don't understand why freezing is needed at all if V4L core takes care
of stopping the stream on suspend, what is the point? If there is no
real point, then let's make threads non-freezable and done with that.

video device fops unlocked_ioctl is set to video_ioctl2() in vi driver.

video device fops unlocked_ioctl gets executed with stream off cmd during suspend and stream on cmd during resume which eventually calls v4l_streamoff and v4l_streamon during system suspend/resume.

My understanding to have freezable threads is during system suspend user space applications are frozen prior to kernel freeze and during suspend when opened video character device node gets closed these ioctl gets invoked and stream off during suspend and stream on during resume happens. So probably we still need to use freezable threads to sync with user space application when frozen before really entering suspend.

Will wait for Thierry/Hans comment to correct if my above understanding is wrong and help clarify if we need freezable threads at all in this case...

Note: I see other drivers using freezable threads for capture drivers.

I see only couple of media drivers using freezable threads.

Also, referring to below article probably we don't need freezable threads.

https://lwn.net/Articles/662703/

Probably we can then remove thread as freezable...




Assuming we use freezable threads, I was saying we don't need conditional try_to_freeze() like you pointed because even if finish thread freeze happens prior to frame capture initiated by start thread, vi hardware will still continue to update this single ongoing buffer and will finish max within 200ms and actually there is no direct processing of this done by finish thread itself except that it returns buffers back when done and in this case it returns back when unfreeze/wake up happens.

So, I don't see any issue of unconditional try_to_freeze() even with freezable threads.

Thanks

Sowjanya






[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux