Hi Jernej, Paul: On Mon, 20 Apr 2020 at 13:41, Jernej Škrabec <jernej.skrabec@xxxxxxxxx> wrote: > > Dne ponedeljek, 20. april 2020 ob 17:10:10 CEST je Paul Kocialkowski > napisal(a): > > Hi, > > > > On Sun 19 Apr 20, 15:28, Samuel Holland wrote: > > > On 4/8/20 11:01 AM, Jernej Škrabec wrote: > > > > Hi Samuel! > > > > > > > > Dne sreda, 08. april 2020 ob 03:02:32 CEST je Samuel Holland napisal(a): > > > >> This allows the VE clocks and PLL_VE to be disabled most of the time. > > > >> > > > >> Since the device is stateless, each frame gets a separate runtime PM > > > >> reference. Enable autosuspend so the PM callbacks are not run before > > > >> and > > > >> after every frame. > > > >> > > > >> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> > > > >> --- > > > >> > > > >> I tested this with v4l2-request-test. I don't have the setup to do > > > >> anything more complicated at the moment. > > > >> > > > >> --- > > > >> > > > >> drivers/staging/media/sunxi/cedrus/cedrus.c | 7 ++ > > > >> .../staging/media/sunxi/cedrus/cedrus_hw.c | 115 ++++++++++++------ > > > >> .../staging/media/sunxi/cedrus/cedrus_hw.h | 3 + > > > >> 3 files changed, 88 insertions(+), 37 deletions(-) > > > > > > [snip] > > > > > > > Reset above causes problem. When format is set in cedrus_s_fmt_vid_cap() > > > > a > > > > function is called, which sets few registers in HW. Of course, there is > > > > no > > > > guarantee that someone will start decoding immediately after capture > > > > format is set. So, if the driver puts VPU to sleep in the mean time, > > > > reset will clear those registers and decoded video will be in different > > > > format than expected. It could be even argued that registers should not > > > > be set in that function and that this is design issue or bug in driver. > > > > > > You're right. I didn't see that cedrus_dst_format_set() was called outside > > > cedrus_engine_enable/disable(). > > > > This might indeed be an issue with multiple decoding contexts in parallel, > > with potentially different formats. For that reason, it looks like the > > right thing to do would be to set the format at each decoding run based on > > the format set in the context by s_fmt. > > So you are suggesting that cedrus_dst_format_set() should be moved to > cedrus_device_run(), right? This way all registers are set at each run, which > is then truly stateless. > BTW, this is how the Hantro and Rockchip's Rkvdec drivers are implemented. One of the main reasons is to have simultaneous decoding support. Thanks, Ezequiel
