Re: [PATCH v2 10/19] media: ti-vpe: cal: remove useless IRQ defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tomi,

Thanks for the patch.

On 3/19/20 2:50 AM, Tomi Valkeinen wrote:
> Remove a bunch of IRQ defines, of which only CAL_HL_IRQ_ENABLE and
> CAL_HL_IRQ_CLEAR are used, and these defines only end up obfuscating
> code.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Tested-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>

Reviewed-by: Benoit Parrot <bparrot@xxxxxx>

> ---
>  drivers/media/platform/ti-vpe/cal.c      | 8 ++++----
>  drivers/media/platform/ti-vpe/cal_regs.h | 6 ------
>  2 files changed, 4 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> index 53072afbaf4e..979f9027a232 100644
> --- a/drivers/media/platform/ti-vpe/cal.c
> +++ b/drivers/media/platform/ti-vpe/cal.c
> @@ -701,11 +701,11 @@ static void enable_irqs(struct cal_ctx *ctx)
>  
>  	/* Enable IRQ_WDMA_END 0/1 */
>  	val = 0;
> -	set_field(&val, CAL_HL_IRQ_ENABLE, CAL_HL_IRQ_MASK(ctx->csi2_port));
> +	set_field(&val, 1, CAL_HL_IRQ_MASK(ctx->csi2_port));
>  	reg_write(ctx->dev, CAL_HL_IRQENABLE_SET(2), val);
>  	/* Enable IRQ_WDMA_START 0/1 */
>  	val = 0;
> -	set_field(&val, CAL_HL_IRQ_ENABLE, CAL_HL_IRQ_MASK(ctx->csi2_port));
> +	set_field(&val, 1, CAL_HL_IRQ_MASK(ctx->csi2_port));
>  	reg_write(ctx->dev, CAL_HL_IRQENABLE_SET(3), val);
>  	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
>  	reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0xFF000000);
> @@ -723,11 +723,11 @@ static void disable_irqs(struct cal_ctx *ctx)
>  
>  	/* Disable IRQ_WDMA_END 0/1 */
>  	val = 0;
> -	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
> +	set_field(&val, 1, CAL_HL_IRQ_MASK(ctx->csi2_port));
>  	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(2), val);
>  	/* Disable IRQ_WDMA_START 0/1 */
>  	val = 0;
> -	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
> +	set_field(&val, 1, CAL_HL_IRQ_MASK(ctx->csi2_port));
>  	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(3), val);
>  	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
>  	reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
> diff --git a/drivers/media/platform/ti-vpe/cal_regs.h b/drivers/media/platform/ti-vpe/cal_regs.h
> index 3b3150aaf343..6a235abc25b1 100644
> --- a/drivers/media/platform/ti-vpe/cal_regs.h
> +++ b/drivers/media/platform/ti-vpe/cal_regs.h
> @@ -142,12 +142,6 @@
>  #define CAL_HL_IRQ_EOI_LINE_NUMBER_EOI0			0
>  
>  #define CAL_HL_IRQ_MASK(m)			BIT((m) - 1)
> -#define CAL_HL_IRQ_NOACTION				0x0
> -#define CAL_HL_IRQ_ENABLE				0x1
> -#define CAL_HL_IRQ_CLEAR				0x1
> -#define CAL_HL_IRQ_DISABLED				0x0
> -#define CAL_HL_IRQ_ENABLED				0x1
> -#define CAL_HL_IRQ_PENDING				0x1
>  
>  #define CAL_HL_IRQ_OCPO_ERR_MASK		BIT(6)
>  
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux