Re: [PATCH v2 09/19] media: ti-vpe: cal: remove useless CAL_GEN_* macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tomi,

Thanks for the patch.

On 3/19/20 2:50 AM, Tomi Valkeinen wrote:
> These macros only obfuscate the code, so drop them.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Tested-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Reviewed-by: Benoit Parrot <bparrot@xxxxxx>

> ---
>  drivers/media/platform/ti-vpe/cal.c      | 20 ++++++++------------
>  drivers/media/platform/ti-vpe/cal_regs.h |  9 ---------
>  2 files changed, 8 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> index ba82f0887875..53072afbaf4e 100644
> --- a/drivers/media/platform/ti-vpe/cal.c
> +++ b/drivers/media/platform/ti-vpe/cal.c
> @@ -777,10 +777,8 @@ static void csi2_phy_init(struct cal_ctx *ctx)
>  
>  	/* 3.B. Program Stop States */
>  	val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
> -	set_field(&val, CAL_GEN_ENABLE,
> -		  CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
> -	set_field(&val, CAL_GEN_DISABLE,
> -		  CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
> +	set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
> +	set_field(&val, 0, CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
>  	set_field(&val, 407, CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
>  	reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
>  	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Stop States\n",
> @@ -789,8 +787,7 @@ static void csi2_phy_init(struct cal_ctx *ctx)
>  
>  	/* 4. Force FORCERXMODE */
>  	val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
> -	set_field(&val, CAL_GEN_ENABLE,
> -		  CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
> +	set_field(&val, 1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
>  	reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
>  	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n",
>  		ctx->csi2_port,
> @@ -853,8 +850,7 @@ static void csi2_wait_for_phy(struct cal_ctx *ctx)
>  	for (i = 0; i < 10; i++) {
>  		if (reg_read_field(ctx->dev,
>  				   CAL_CSI2_TIMING(ctx->csi2_port),
> -				   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) ==
> -		    CAL_GEN_DISABLE)
> +				   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0)
>  			break;
>  		usleep_range(1000, 1100);
>  	}
> @@ -951,13 +947,13 @@ static void csi2_ppi_enable(struct cal_ctx *ctx)
>  {
>  	reg_write(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port), BIT(3));
>  	reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port),
> -			CAL_GEN_ENABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
> +			1, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
>  }
>  
>  static void csi2_ppi_disable(struct cal_ctx *ctx)
>  {
>  	reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port),
> -			CAL_GEN_DISABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
> +			0, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
>  }
>  
>  static void csi2_ctx_config(struct cal_ctx *ctx)
> @@ -1032,7 +1028,7 @@ static void pix_proc_config(struct cal_ctx *ctx)
>  	set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK);
>  	set_field(&val, pack, CAL_PIX_PROC_PACK_MASK);
>  	set_field(&val, ctx->csi2_port, CAL_PIX_PROC_CPORT_MASK);
> -	set_field(&val, CAL_GEN_ENABLE, CAL_PIX_PROC_EN_MASK);
> +	set_field(&val, 1, CAL_PIX_PROC_EN_MASK);
>  	reg_write(ctx->dev, CAL_PIX_PROC(ctx->csi2_port), val);
>  	ctx_dbg(3, ctx, "CAL_PIX_PROC(%d) = 0x%08x\n", ctx->csi2_port,
>  		reg_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port)));
> @@ -1052,7 +1048,7 @@ static void cal_wr_dma_config(struct cal_ctx *ctx,
>  		  CAL_WR_DMA_CTRL_MODE_MASK);
>  	set_field(&val, CAL_WR_DMA_CTRL_PATTERN_LINEAR,
>  		  CAL_WR_DMA_CTRL_PATTERN_MASK);
> -	set_field(&val, CAL_GEN_ENABLE, CAL_WR_DMA_CTRL_STALL_RD_MASK);
> +	set_field(&val, 1, CAL_WR_DMA_CTRL_STALL_RD_MASK);
>  	reg_write(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port), val);
>  	ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->csi2_port,
>  		reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port)));
> diff --git a/drivers/media/platform/ti-vpe/cal_regs.h b/drivers/media/platform/ti-vpe/cal_regs.h
> index 2d71f1e86e2a..3b3150aaf343 100644
> --- a/drivers/media/platform/ti-vpe/cal_regs.h
> +++ b/drivers/media/platform/ti-vpe/cal_regs.h
> @@ -100,15 +100,6 @@
>  /* CAL Control Module Core Camerrx Control register offsets */
>  #define CM_CTRL_CORE_CAMERRX_CONTROL	0x000
>  
> -/*********************************************************************
> -* Generic value used in various field below
> -*********************************************************************/
> -
> -#define CAL_GEN_DISABLE			0
> -#define CAL_GEN_ENABLE			1
> -#define CAL_GEN_FALSE			0
> -#define CAL_GEN_TRUE			1
> -
>  /*********************************************************************
>  * Field Definition Macros
>  *********************************************************************/
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux