Re: [RFC][PATCH 12/15] videobuf2: add begin/end cpu_access callbacks to dma-sg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 30, 2020 at 9:18 PM Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
>
> On 1/30/20 12:02 PM, Tomasz Figa wrote:
> > On Tue, Jan 28, 2020 at 5:36 PM Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> >>
> >> On 1/28/20 5:38 AM, Tomasz Figa wrote:
> >>> On Fri, Jan 10, 2020 at 7:13 PM Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> >>>>
> >>>> On 12/17/19 4:20 AM, Sergey Senozhatsky wrote:
> >>>>> Provide begin_cpu_access() and end_cpu_access() dma_buf_ops
> >>>>> callbacks for cache synchronisation on exported buffers.
> >>>>>
> >>>>> Signed-off-by: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
> >>>>> ---
> >>>>>  .../media/common/videobuf2/videobuf2-dma-sg.c | 22 +++++++++++++++++++
> >>>>>  1 file changed, 22 insertions(+)
> >>>>>
> >>>>> diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> >>>>> index 6db60e9d5183..bfc99a0cb7b9 100644
> >>>>> --- a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> >>>>> +++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> >>>>> @@ -470,6 +470,26 @@ static void vb2_dma_sg_dmabuf_ops_release(struct dma_buf *dbuf)
> >>>>>       vb2_dma_sg_put(dbuf->priv);
> >>>>>  }
> >>>>>
> >>>>
> >>>> There is no corresponding vb2_sg_buffer_consistent function here.
> >>>>
> >>>> Looking more closely I see that vb2_dma_sg_alloc doesn't pass the dma_attrs
> >>>> argument to dma_map_sg_attrs, thus V4L2_FLAG_MEMORY_NON_CONSISTENT has no
> >>>> effect on dma-sg buffers.
> >>>
> >>> videobuf2-dma-sg allocates the memory using the page allocator
> >>> directly, which means that there is no memory consistency guarantee.
> >>>
> >>>>
> >>>> Is there a reason why dma_attrs isn't passed on to dma_map_sg_attrs()?
> >>>>
> >>>
> >>> V4L2_FLAG_MEMORY_NON_CONSISTENT is a flag for dma_alloc_attrs(). It
> >>> isn't supposed to do anything for dma_map_sg_attrs(), which is only
> >>> supposed to create the device (e.g. IOMMU) mapping for already
> >>> allocated memory.
> >>
> >> Ah, right.
> >>
> >> But could vb2_dma_sg_alloc_compacted() be modified so that is uses
> >> dma_alloc_attrs() instead of alloc_pages()? Sorry, that might be a stupid
> >> question, I'm not an expert in this area. All I know is that I hate inconsistent
> >> APIs where something works for one thing, but not another.
> >>
> >
> > dma_alloc_attrs() would allocate contiguous memory, which kind of goes
> > against the vb2_dma_sg allocator idea. Technically we could call it N
> > times with size = 1 page to achieve what we want, but is this really
> > what we want?
> >
> > Given that vb2_dma_sg has always been returning non-consistent memory,
> > do we have any good reason to add consistent memory to it? If so,
> > perhaps we could still do that in an incremental patch, to avoid
> > complicating this already complex series? :)
>
> I very much agree with that. But this should be very clearly documented.
> Should V4L2_CAP_MEMORY_NON_CONSISTENT always be set in this case?
>

Yes, IMHO that would make sense. My understanding is that currently
the consistency of allocated memory is unspecified, so it can be
either. With V4L2_FLAG_MEMORY_NON_CONSISTENT, the userspace can
explicitly ask for inconsistent memory.

Moreover, I'd vote for setting V4L2_CAP_MEMORY_NON_CONSISTENT when
V4L2_FLAG_MEMORY_NON_CONSISTENT is guaranteed to return inconsistent
memory to avoid "optional" features or "hints" without guaranteed
behavior.

> Regards,
>
>         Hans
>
> >
> > Best regards,
> > Tomasz
> >
> >> Regards,
> >>
> >>         Hans
> >>
> >>>
> >>>> I suspect it was just laziness in the past, and that it should be wired
> >>>> up, just as for dma-contig.
> >>>>
> >>>> Regards,
> >>>>
> >>>>         Hans
> >>>>
> >>>>> +static int vb2_dma_sg_dmabuf_ops_begin_cpu_access(struct dma_buf *dbuf,
> >>>>> +                                     enum dma_data_direction direction)
> >>>>> +{
> >>>>> +     struct vb2_dma_sg_buf *buf = dbuf->priv;
> >>>>> +     struct sg_table *sgt = buf->dma_sgt;
> >>>>> +
> >>>>> +     dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
> >>>>> +     return 0;
> >>>>> +}
> >>>>> +
> >>>>> +static int vb2_dma_sg_dmabuf_ops_end_cpu_access(struct dma_buf *dbuf,
> >>>>> +                                     enum dma_data_direction direction)
> >>>>> +{
> >>>>> +     struct vb2_dma_sg_buf *buf = dbuf->priv;
> >>>>> +     struct sg_table *sgt = buf->dma_sgt;
> >>>>> +
> >>>>> +     dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
> >>>>> +     return 0;
> >>>>> +}
> >>>>> +
> >>>>>  static void *vb2_dma_sg_dmabuf_ops_vmap(struct dma_buf *dbuf)
> >>>>>  {
> >>>>>       struct vb2_dma_sg_buf *buf = dbuf->priv;
> >>>>> @@ -488,6 +508,8 @@ static const struct dma_buf_ops vb2_dma_sg_dmabuf_ops = {
> >>>>>       .detach = vb2_dma_sg_dmabuf_ops_detach,
> >>>>>       .map_dma_buf = vb2_dma_sg_dmabuf_ops_map,
> >>>>>       .unmap_dma_buf = vb2_dma_sg_dmabuf_ops_unmap,
> >>>>> +     .begin_cpu_access = vb2_dma_sg_dmabuf_ops_begin_cpu_access,
> >>>>> +     .end_cpu_access = vb2_dma_sg_dmabuf_ops_end_cpu_access,
> >>>>>       .vmap = vb2_dma_sg_dmabuf_ops_vmap,
> >>>>>       .mmap = vb2_dma_sg_dmabuf_ops_mmap,
> >>>>>       .release = vb2_dma_sg_dmabuf_ops_release,
> >>>>>
> >>>>
> >>
>



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux