Re: [PATCH v3 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob, Sakari,

On Tue, Oct 29, 2019 at 05:12:13PM -0500, Rob Herring wrote:
> On Mon, Oct 28, 2019 at 02:21:15PM +0200, Sakari Ailus wrote:
> > Hi Manivannan,
> > 
> > Thanks for the update.
> > 
> > On Fri, Oct 25, 2019 at 11:29:07PM +0530, Manivannan Sadhasivam wrote:
> > > Add YAML devicetree binding for IMX296 CMOS image sensor.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > ---
> > >  .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++++++++++++++++++
> > >  1 file changed, 98 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > > new file mode 100644
> > > index 000000000000..4e204fd7cf90
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > > @@ -0,0 +1,98 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
> > > +
> > > +maintainers:
> > > +  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > +
> > > +description: |-
> > > +  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
> > > +  sensor with square pixel array and 1.58 M effective pixels. This chip
> > > +  features a global shutter with variable charge-integration time. It is
> > > +  programmable through I2C and 4-wire interfaces. The sensor output is
> > > +  available via CSI-2 serial data output (1 Lane).
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: sony,imx296
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    maxItems: 1
> > > +
> > > +  clock-names:
> > > +    description:
> > > +      Input clock for the sensor.
> > > +    items:
> > > +      - const: mclk
> > > +
> > > +  clock-frequency:
> > > +    description:
> > > +      Frequency of the mclk clock in Hertz.
> > > +    default: 37125000
> > 
> > I think you could omit the default.
> 
> Yes, there's no default if it is required.
>

Okay.

> > > +
> > > +  vddo-supply:
> > > +    description:
> > > +      Definition of the regulator used as interface power supply.
> > > +    maxItems: 1
> > > +
> > > +  vdda-supply:
> > > +    description:
> > > +      Definition of the regulator used as analog power supply.
> > > +    maxItems: 1
> > > +
> > > +  vddd-supply:
> > > +    description:
> > > +      Definition of the regulator used as digital power supply.
> > > +    maxItems: 1
> > > +
> > > +  reset-gpios:
> > > +    description:
> > > +      The phandle and specifier for the GPIO that controls sensor reset.
> > > +    maxItems: 1
> > > +
> > > +  # See ../video-interfaces.txt for details
> 
> details on what?
>

Standard properties like endpoint, reg, etc...  I can remove it if not
required.

> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - clock-names
> > > +  - clock-frequency
> > > +  - vddo-supply
> > > +  - vdda-supply
> > > +  - vddd-supply
> > 
> > I think the port and endpoint nodes should documented here as well.
> 
> port yes, but endpoint no. Unless you have endpoint properties other 
> than remote-endpoint or reg.
> 


Okay. Will document port.

Thanks,
Mani

> > 
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/gpio/gpio.h>
> > > +
> > > +    imx296: camera-sensor@1a {
> > > +        compatible = "sony,imx296";
> > > +        reg = <0x1a>;
> > > +        reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> > > +        pinctrl-names = "default";
> > > +        pinctrl-0 = <&camera_rear_default>;
> > > +        clocks = <&gcc 90>;
> > > +        clock-names = "mclk";
> > > +        clock-frequency = <37125000>;
> > > +        vddo-supply = <&camera_vddo_1v8>;
> > > +        vdda-supply = <&camera_vdda_3v3>;
> > > +        vddd-supply = <&camera_vddd_1v2>;
> > > +
> > > +        port {
> > > +            imx296_ep: endpoint {
> > > +                remote-endpoint = <&csiphy0_ep>;
> > > +            };
> > > +        };
> > > +    };
> > > +
> > > +...
> > 
> > -- 
> > Regards,
> > 
> > Sakari Ailus



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux