Hello, This patchset adds support for IMX296 CMOS image sensor from Sony. Sensor can be programmed through I2C and 4-wire interface but the current driver only supports I2C interface. The sensor is capable of outputting frames in CSI2 format (1 Lane). In the case of sensor resolution, driver only supports 1440x1088 at 30 FPS. The driver has been validated using Framos IMX296 module interfaced to 96Boards Dragonboard410c. Thanks, Mani Changes in v3: * Fixed the reference to video-interfaces.txt in binding. Changes in v2: * Switched to YAML binding Manivannan Sadhasivam (2): dt-bindings: media: i2c: Add IMX296 CMOS sensor binding media: i2c: Add IMX296 CMOS image sensor driver .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++ MAINTAINERS | 8 + drivers/media/i2c/Kconfig | 11 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/imx296.c | 733 ++++++++++++++++++ 5 files changed, 851 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml create mode 100644 drivers/media/i2c/imx296.c -- 2.17.1
