Pass the v4l2-ctl configuration for the imx6q-sabreauto PAL
example for completeness and consistency.
Suggested-by: Steve Longerbeam <slongerbeam@xxxxxxxxx>
Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
---
Changes since v2:
- Newly introduced patch
Documentation/media/v4l-drivers/imx.rst | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst
index aab68d8ef2c9..1246573c1019 100644
--- a/Documentation/media/v4l-drivers/imx.rst
+++ b/Documentation/media/v4l-drivers/imx.rst
@@ -564,10 +564,11 @@ alternating fields (field type 'seq-tb' for PAL, or 'alternate').
media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]"
media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]"
media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]"
+ # Configure "ipu1_ic_prpvf capture" interface (assumed at /dev/video2)
+ v4l2-ctl -d2 --set-fmt-video=field=none
-Streaming can then begin on the capture device node at
-"ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any
-supported YUV or RGB pixelformat on the capture device node.
+Streaming can then begin on /dev/video2. The v4l2-ctl tool can also be
+used to select any supported YUV pixelformat on /dev/video2.
This platform accepts Composite Video analog inputs to the ADV7180 on
Ain1 (connector J42).
--
2.17.1
