Hi Manivannan,
On Thu, Oct 03, 2019 at 11:03:38AM +0530, Manivannan Sadhasivam wrote:
....
> > > > > +static int imx290_set_gain(struct imx290 *imx290, u32 value)
> > > > > +{
> > > > > + int ret;
> > > > > +
> > > > > + u32 adjusted_value = (value * 10) / 3;
> > > >
> > > > What's the purpose of this? Why not to use the value directly?
> > > >
> > >
> > > The gain register accepts the value 10/3 of the actual gain required. Hence,
> > > we need to manually do the calculation before updating the value. I can
> > > add a comment here to clarify.
> >
> > It's better to use the register value directly. Otherwise the granularity
> > won't be available to the user space.
> >
>
> The sensor datasheet clearly defines that the 10/3'rd of the expected gain
> should be set to this register. So, IMO we should be setting the value as
The unit of that gain is decibels, but the controls do not have a unit.
Register value is really preferred here.
> mentioned in the datasheet. I agree that we are missing the userspace
> granularity here but sticking to the device limitation shouldn't be a problem.
> As I said, I'll add a comment here to clarify.
The comment isn't visible in the uAPI.
>
> > >
> > > > > +
> > > > > + ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, adjusted_value);
> > > > > + if (ret)
> > > > > + dev_err(imx290->dev, "Unable to write gain\n");
> > > > > +
> > > > > + return ret;
> > > > > +}
> > > > > +
> > > > > +static int imx290_set_power_on(struct imx290 *imx290)
> > > > > +{
> > > > > + int ret;
> > > > > +
> > > > > + ret = clk_prepare_enable(imx290->xclk);
> > > >
> > > > Please move the code from this function to the runtime PM runtime suspend
> > > > callback. The same for imx290_set_power_off().
> > > >
> > >
> > > May I know why? I think since this is being used only once, you're suggesting
> > > to move to the callback function itself but please see the comment below. I
> > > will reuse this function to power on the device during probe.
> >
> > Yes, you can call the same function from probe, even if it's used as a
> > runtime PM callback.
> >
> > There's no need to have a function that acts as a wrapper for calling it
> > with a different type of an argument.
> >
>
> You mean directly calling imx290_runtime_resume() from probe is fine?
Yes. Feel free to call it e.g. imx290_power_on or something.
--
Regards,
Sakari Ailus
