Hi Manivannan,
On Wed, Oct 02, 2019 at 12:12:00AM +0530, Manivannan Sadhasivam wrote:
> Hi Sakari,
>
> On Mon, Sep 23, 2019 at 12:22:09PM +0300, Sakari Ailus wrote:
> > Hi Manivannan,
> >
> > On Fri, Aug 30, 2019 at 02:49:42PM +0530, Manivannan Sadhasivam wrote:
> > > Add driver for Sony IMX290 CMOS image sensor driver. The driver only
> > > supports I2C interface for programming and MIPI CSI-2 for sensor output.
> > >
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > ---
> > > drivers/media/i2c/Kconfig | 11 +
> > > drivers/media/i2c/Makefile | 1 +
> > > drivers/media/i2c/imx290.c | 881 +++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 893 insertions(+)
> > > create mode 100644 drivers/media/i2c/imx290.c
> > >
> > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > > index 79ce9ec6fc1b..4ebb80b18748 100644
> > > --- a/drivers/media/i2c/Kconfig
> > > +++ b/drivers/media/i2c/Kconfig
> > > @@ -595,6 +595,17 @@ config VIDEO_IMX274
> > > This is a V4L2 sensor driver for the Sony IMX274
> > > CMOS image sensor.
> > >
> > > +config VIDEO_IMX290
> > > + tristate "Sony IMX290 sensor support"
> > > + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > > + depends on MEDIA_CAMERA_SUPPORT
> >
> > Please drop this line. It will be redundant very soon.
> >
>
> okay.
>
> > > + help
> > > + This is a Video4Linux2 sensor driver for the Sony
> > > + IMX290 camera sensor.
> > > +
> > > + To compile this driver as a module, choose M here: the
> > > + module will be called imx290.
> > > +
> > > config VIDEO_IMX319
> > > tristate "Sony IMX319 sensor support"
> > > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > > index fd4ea86dedd5..04411ddb4922 100644
> > > --- a/drivers/media/i2c/Makefile
> > > +++ b/drivers/media/i2c/Makefile
> > > @@ -111,6 +111,7 @@ obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
> > > obj-$(CONFIG_VIDEO_IMX214) += imx214.o
> > > obj-$(CONFIG_VIDEO_IMX258) += imx258.o
> > > obj-$(CONFIG_VIDEO_IMX274) += imx274.o
> > > +obj-$(CONFIG_VIDEO_IMX290) += imx290.o
> > > obj-$(CONFIG_VIDEO_IMX319) += imx319.o
> > > obj-$(CONFIG_VIDEO_IMX355) += imx355.o
> > > obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > > new file mode 100644
> > > index 000000000000..db5bb0d69eb8
> > > --- /dev/null
> > > +++ b/drivers/media/i2c/imx290.c
> > > @@ -0,0 +1,881 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Sony IMX290 CMOS Image Sensor Driver
> > > + *
> > > + * Copyright (C) 2019 FRAMOS GmbH.
> > > + *
> > > + * Copyright (C) 2019 Linaro Ltd.
> > > + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > + */
> > > +
> > > +#include <linux/clk.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/gpio/consumer.h>
> > > +#include <linux/i2c.h>
> > > +#include <linux/module.h>
> > > +#include <linux/pm_runtime.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/regulator/consumer.h>
> > > +#include <media/media-entity.h>
> > > +#include <media/v4l2-ctrls.h>
> > > +#include <media/v4l2-device.h>
> > > +#include <media/v4l2-fwnode.h>
> > > +#include <media/v4l2-subdev.h>
> > > +
> > > +#define IMX290_STANDBY 0x3000
> > > +#define IMX290_REGHOLD 0x3001
> > > +#define IMX290_XMSTA 0x3002
> > > +#define IMX290_GAIN 0x3014
> > > +
> > > +#define IMX290_DEFAULT_LINK_FREQ 445500000
> > > +
> > > +static const char * const imx290_supply_name[] = {
> > > + "vdda",
> > > + "vddd",
> > > + "vdddo",
> > > +};
> > > +
> > > +#define IMX290_NUM_SUPPLIES ARRAY_SIZE(imx290_supply_name)
> > > +
> > > +struct imx290_regval {
> > > + u16 reg;
> > > + u8 val;
> > > +};
> > > +
> > > +struct imx290_mode {
> > > + u32 width;
> > > + u32 height;
> > > + u32 pixel_rate;
> > > + u32 link_freq_index;
> > > +
> > > + const struct imx290_regval *data;
> > > + u32 data_size;
> > > +};
> > > +
> > > +struct imx290 {
> > > + struct device *dev;
> > > + struct clk *xclk;
> > > + struct regmap *regmap;
> > > +
> > > + struct v4l2_subdev sd;
> > > + struct v4l2_fwnode_endpoint ep;
> > > + struct media_pad pad;
> > > + struct v4l2_mbus_framefmt current_format;
> > > + const struct imx290_mode *current_mode;
> > > +
> > > + struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES];
> > > + struct gpio_desc *rst_gpio;
> > > +
> > > + struct v4l2_ctrl_handler ctrls;
> > > + struct v4l2_ctrl *link_freq;
> > > + struct v4l2_ctrl *pixel_rate;
> > > +
> > > + struct mutex lock;
> > > +};
> > > +
> > > +struct imx290_pixfmt {
> > > + u32 code;
> > > +};
> > > +
> > > +static const struct imx290_pixfmt imx290_formats[] = {
> > > + { MEDIA_BUS_FMT_SRGGB10_1X10 },
> >
> > You have a single format here. You don't need the entire array, do you?
> >
> > Unless you have plans to add more, that is.
> >
>
> Yes, the sensor supports RAW12 format as well and it will be added once
> this driver is merged.
Ok.
>
> > > +};
> > > +
> > > +static struct regmap_config imx290_regmap_config = {
Should this be const, too?
> > > + .reg_bits = 16,
> > > + .val_bits = 8,
> > > + .cache_type = REGCACHE_RBTREE,
> > > +};
...
> > > +static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low,
> > > + u8 nr_regs, u32 value)
> > > +{
> > > + unsigned int i;
> > > + int ret;
> > > +
> > > + ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01);
> > > + if (ret) {
> > > + dev_err(imx290->dev, "Error setting hold register\n");
> > > + return ret;
> > > + }
> > > +
> > > + for (i = 0; i < nr_regs; i++) {
> > > + ret = imx290_write_reg(imx290, address_low + i,
> > > + (u8)(value >> (i * 8)));
> > > + if (ret) {
> > > + dev_err(imx290->dev, "Error writing buffered registers\n");
> > > + return ret;
> > > + }
> > > + }
> > > +
> > > + ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00);
> > > + if (ret) {
> > > + dev_err(imx290->dev, "Error setting hold register\n");
> > > + return ret;
> > > + }
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int imx290_set_gain(struct imx290 *imx290, u32 value)
> > > +{
> > > + int ret;
> > > +
> > > + u32 adjusted_value = (value * 10) / 3;
> >
> > What's the purpose of this? Why not to use the value directly?
> >
>
> The gain register accepts the value 10/3 of the actual gain required. Hence,
> we need to manually do the calculation before updating the value. I can
> add a comment here to clarify.
It's better to use the register value directly. Otherwise the granularity
won't be available to the user space.
>
> > > +
> > > + ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, adjusted_value);
> > > + if (ret)
> > > + dev_err(imx290->dev, "Unable to write gain\n");
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int imx290_set_power_on(struct imx290 *imx290)
> > > +{
> > > + int ret;
> > > +
> > > + ret = clk_prepare_enable(imx290->xclk);
> >
> > Please move the code from this function to the runtime PM runtime suspend
> > callback. The same for imx290_set_power_off().
> >
>
> May I know why? I think since this is being used only once, you're suggesting
> to move to the callback function itself but please see the comment below. I
> will reuse this function to power on the device during probe.
Yes, you can call the same function from probe, even if it's used as a
runtime PM callback.
There's no need to have a function that acts as a wrapper for calling it
with a different type of an argument.
--
Kind regards,
Sakari Ailus
