On 9/20/19 3:51 PM, Ricardo Ribalda Delgado wrote: > From: Ricardo Ribalda Delgado <ribalda@xxxxxxxxxx> > > According to the product brief, the unit cell size is 1120 nanometers^2. > > https://www.sony-semicon.co.jp/products_en/IS/sensor1/img/products/ProductBrief_IMX214_20150428.pdf > > Signed-off-by: Ricardo Ribalda Delgado <ribalda@xxxxxxxxxx> > --- > drivers/media/i2c/imx214.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c > index 159a3a604f0e..57562e20c4ca 100644 > --- a/drivers/media/i2c/imx214.c > +++ b/drivers/media/i2c/imx214.c > @@ -47,6 +47,7 @@ struct imx214 { > struct v4l2_ctrl *pixel_rate; > struct v4l2_ctrl *link_freq; > struct v4l2_ctrl *exposure; > + struct v4l2_ctrl *unit_size; > > struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES]; > > @@ -948,6 +949,13 @@ static int imx214_probe(struct i2c_client *client) > static const s64 link_freq[] = { > IMX214_DEFAULT_LINK_FREQ, > }; > + struct v4l2_area unit_size = { > + .width = 1120, > + .height = 1120, > + }; > + union v4l2_ctrl_ptr p_def = { > + .p_area = &unit_size, > + }; Use static const for both. I think you should add a small static inline helper function to v4l2-ctrls.h that takes a void pointer and returns a union v4l2_ctrl_ptr. Then you don't need to make a union v4l2_ctrl_ptr just to pass the unit_size pointer. Regards, Hans > int ret; > > ret = imx214_parse_fwnode(dev); > @@ -1029,6 +1037,10 @@ static int imx214_probe(struct i2c_client *client) > V4L2_CID_EXPOSURE, > 0, 3184, 1, 0x0c70); > > + imx214->unit_size = v4l2_ctrl_new_std_compound(&imx214->ctrls, > + NULL, > + V4L2_CID_UNIT_CELL_SIZE, > + p_def); > ret = imx214->ctrls.error; > if (ret) { > dev_err(&client->dev, "%s control init failed (%d)\n", >
