Re: [PATCH v6 05/13] media: tvp5150: add input source selection of_graph support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



H Marco,

On Thu, Aug 15, 2019 at 03:22:51PM +0200, Marco Felsch wrote:
> On 19-08-15 15:51, Laurent Pinchart wrote:
> > On Tue, Aug 13, 2019 at 10:54:29AM +0200, Marco Felsch wrote:
> >> On 19-05-16 21:03, Laurent Pinchart wrote:
> >>> On Tue, May 14, 2019 at 03:25:45PM -0300, Mauro Carvalho Chehab wrote:
> >>>> Em Mon, 15 Apr 2019 14:44:05 +0200 Marco Felsch escreveu:
> >>>> 
> >>>>> This patch adds the of_graph support to describe the tvp connections.
> >>>>> Physical the TVP5150 has three ports: AIP1A, AIP1B and YOUT. As result
> >>>>> of discussion [1],[2] the device-tree maps these ports 1:1. The svideo
> >>>>> connector must be conneted to port@0/endpoint@1, look at the Documentation
> >>> 
> >>> According to [2], it must be connected to port port@0 and port@1, not
> >>> just port@0.
> >> 
> >> You're right. I missed that.. I will change that for the v7.
> >> 
> >>>>> for more information. Since the TVP5150 is a converter the device-tree
> >>>>> must contain at least 1-input and 1-output port. The mc-connectors and
> >>>>> mc-links are only created if the device-tree contains the corresponding
> >>>>> connector nodes. If more than one connector is available the
> >>>>> media_entity_operations.link_setup() callback ensures that only one
> >>>>> connector is active.
> >>>>> 
> >>>>> [1] https://www.spinics.net/lists/linux-media/msg138545.html
> >>>>> [2] https://www.spinics.net/lists/linux-media/msg138546.html
> >>>>> 
> >>>>> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> >>>>> ---
> >>>>> Changelog:
> >>>>> 
> >>>>> [1] https://patchwork.kernel.org/cover/10794703/
> >>>>> [2] https://patchwork.kernel.org/cover/10786553/
> >>>>> 
> >>>>> v6:
> >>>>> - fix misspelled comments
> >>>>> - use 'unsigned int' where it's possible
> >>>>> - cleanup ifdef part-2:
> >>>>>   - tvp5150_mc_init, tvp5150_add_of_connectors: add surrounding
> >>>>>     CONFIG_MEDIA_CONTROLLER ifdef and stubs to improve readability
> >>>>> - tvp5150_mc_init: uniform interface, use 'struct tvp5150' since all
> >>>>>   internal function do this.
> >>>>> - tvp5150_add_of_connectors: call within probe() to make it cleaner
> >>>>> - tvp5150_parse_dt: move local loop vars within the loop.
> >>>>> 
> >>>>> v5:
> >>>>> - Fixing build deps:
> >>>>>   - tvp5150_mc_init: fix CONFIG_MEDIA_CONTROLLER deps
> >>>>>   - struct tvp5150: drop CONFIG_MEDIA_CONTROLLER conditional property
> >>>>>     includes. This leads into to complex deps for futher development.
> >>>>>   - tvp5150_dt_cleanup: enable function only if CONFIG_OF is enabled
> >>>>>   - tvp5150_parse_dt: enable function only if CONFIG_OF is enabled
> >>>>>   - tvp5150_probe: call tvp5150_dt_cleanup only if CONFIG_OF is enabled
> >>>>> 
> >>>>> - Simplify link_setup routine:
> >>>>>   - use generic connector parsing since both series [1,2] are squashed into
> >>>>>     one
> >>>>>   - struct tvp5150: drop pads_state and modify_second_link property
> >>>>>     due to link_setup() rework.
> >>>>>   - tvp5150_link_setup: add more comments
> >>>>>   - tvp5150_link_setup: simply the link setup routine a lot. Edit the 2nd
> >>>>>     link directly within the driver instead of a recursive media-framework
> >>>>>     call (__media_entity_setup_link). This improves the readability and
> >>>>>     shrinks the driver code.
> >>>>>   - tvp5150_link_setup: disable all active links in case user switches
> >>>>>     connectors without disable it first.
> >>>>>   - tvp5150_registered: simplify default link enable path due to link_setup()
> >>>>>     rework.
> >>>>> 
> >>>>> - General cleanups
> >>>>>   - tvp5150_parse_dt: drop unecessary test
> >>>>>   - tvp5150_parse_dt: add err message due to misconfiguration
> >>>>>   - tvp5150_parse_dt: make use of V4L2_MBUS_UNKNOWN definition
> >>>>>   - s/dev_dbg/dev_dbg_lvl
> >>>>> 
> >>>>> v4:
> >>>>>  - rebase on top of media_tree/master, fix merge conflict due to commit
> >>>>>    60359a28d592 ("media: v4l: fwnode: Initialise the V4L2 fwnode endpoints
> >>>>>    to zero")
> >>>>> 
> >>>>> v3:
> >>>>> - probe(): s/err/err_free_v4l2_ctrls
> >>>>> - drop MC dependency for tvp5150_pads
> >>>>> 
> >>>>> v2:
> >>>>> - adapt commit message
> >>>>> - unify ifdef switches
> >>>>> - rename tvp5150_valid_input -> tvp5150_of_valid_input, to be more precise
> >>>>> - mc: use 2-input and 1-output pad
> >>>>> - mc: link svideo connector to both input pads
> >>>>> - mc: enable/disable svideo links in one go
> >>>>> - mc: change link_setup() behaviour, switch the input src don't require a
> >>>>>       explicite disable before.
> >>>>> - mc: rename 'local' media_pad param to tvp5150_pad to avoid confusion
> >>>>> - mc: enable link to the first available connector and set the
> >>>>>       corresponding tvp5150 input src per default during registered()
> >>>>> - mc/of: factor out oftree connector allocation
> >>>>> - of: drop svideo dt port
> >>>>> - of: move svideo connector to port@0/endpoint@1
> >>>>> - of: require at least 1-in and 1-out endpoint
> >>>>> 
> >>>>>  drivers/media/i2c/tvp5150.c | 409 ++++++++++++++++++++++++++++++++----
> >>>>>  1 file changed, 370 insertions(+), 39 deletions(-)
> >>>>> 
> >>>>> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> >>>>> index 89da921c8886..4e3228b2ccbc 100644
> >>>>> --- a/drivers/media/i2c/tvp5150.c
> >>>>> +++ b/drivers/media/i2c/tvp5150.c
> >>>>> @@ -44,16 +44,29 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)");
> >>>>>  #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
> >>>>>  
> >>>>>  enum tvp5150_pads {
> >>>>> -	TVP5150_PAD_IF_INPUT,
> >>>>> +	TVP5150_PAD_AIP1A = TVP5150_COMPOSITE0,
> >>>>> +	TVP5150_PAD_AIP1B,
> >>>>>  	TVP5150_PAD_VID_OUT,
> >>>>>  	TVP5150_NUM_PADS
> >>>>>  };
> >>>>>  
> >>>>> +struct tvp5150_connector {
> >>>>> +	struct v4l2_fwnode_connector base;
> >>>>> +	struct media_entity ent;
> >>>>> +	struct media_pad pad;
> >>>>> +};
> >>>>> +
> >>>>>  struct tvp5150 {
> >>>>>  	struct v4l2_subdev sd;
> >>>>> -#ifdef CONFIG_MEDIA_CONTROLLER
> >>>>> +	/* additional endpoint for the svideo connector */
> >>> 
> >>> Could you please capitalize the first word of all comments to match the
> >>> driver style ?
> >> 
> >> Okay, I will check it for my v7.
> >> 
> >>>>> +	struct device_node *endpoints[TVP5150_NUM_PADS + 1];
> >>> 
> >>> As the endpoints are only used at probe time, I would declare this as a
> >>> local variable in the probe function and pass it to both
> >>> tvp5150_add_of_connectors() and tvp5150_parse_dt(). If you order the
> >>> calls correctly it should simplify the probe error handling.
> >> 
> >> Yes that could be also a solution. I took Jacopo's comments and
> >> refactored the code so the endpoints no longer needed in my v7.
> >> 
> >>>>> +	unsigned int endpoints_num;
> >>>>> +
> >>>>> +	/* media-ctl properties */
> >>> 
> >>> media-ctl makes me think about the userspace application, maybe "Media
> >>> controller properties" ?
> >> 
> >> I've dopped that comment becuase it is to obvious..
> >> 
> >>>>>  	struct media_pad pads[TVP5150_NUM_PADS];
> >>>>> -#endif
> >>>>> +	struct tvp5150_connector *connectors;
> >>>>> +	int connectors_num;
> >>> 
> >>> unsigned int ?
> >> 
> >> Of course.
> >> 
> >>>>> +
> >>>>>  	struct v4l2_ctrl_handler hdl;
> >>>>>  	struct v4l2_rect rect;
> >>>>>  	struct regmap *regmap;
> >>>>> @@ -1167,6 +1180,131 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
> >>>>>  	return 0;
> >>>>>  }
> >>>>>  
> >>>>> +/****************************************************************************
> >>>>> + *			Media entity ops
> >>>>> + ****************************************************************************/
> >>>>> +#if defined(CONFIG_MEDIA_CONTROLLER)
> >>> 
> >>> Should we depend on CONFIG_MEDIA_CONTROLLER instead, especially since
> >>> you remove the similar conditional in the struct tvp5150 definition and
> >>> in the probe function ?
> >> 
> >> I don't know if we can add the dependency without worries because the
> >> tvp5150 is also used by the usb/em28xx devices which can be build
> >> without CONFIG_MEDIA_CONTROLLER support. During .probe() a stub function
> >> will be called if CONFIG_MEDIA_CONTROLLER isn't enabled.
> >> 
> >>>>> +static int tvp5150_set_link(struct media_pad *connector_pad,
> >>>>> +			    struct media_pad *tvp5150_pad, u32 flags)
> >>>>> +{
> >>>>> +	struct media_link *link;
> >>>>> +
> >>>>> +	link = media_entity_find_link(connector_pad, tvp5150_pad);
> >>>>> +	if (!link)
> >>>>> +		return -EINVAL;
> >>>>> +
> >>>>> +	link->flags = flags;
> >>>>> +	link->reverse->flags = link->flags;
> >>>>> +
> >>>>> +	return 0;
> >>>>> +}
> >>>>> +
> >>>>> +static int tvp5150_disable_all_input_links(struct tvp5150 *decoder)
> >>>>> +{
> >>>>> +	struct media_pad *connector_pad;
> >>>>> +	unsigned int i;
> >>>>> +	int err;
> >>>>> +
> >>>>> +	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {
> >>>>> +		connector_pad = media_entity_remote_pad(&decoder->pads[i]);
> >>>>> +		if (!connector_pad)
> >>>>> +			continue;
> >>>>> +
> >>>>> +		err = tvp5150_set_link(connector_pad, &decoder->pads[i], 0);
> >>>>> +		if (err)
> >>>>> +			return err;
> >>>>> +	}
> >>>>> +
> >>>>> +	return 0;
> >>>>> +}
> >>>>> +
> >>>>> +static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
> >>>>> +			     u32 config);
> >>>>> +
> >>>>> +static int tvp5150_link_setup(struct media_entity *entity,
> >>>>> +			      const struct media_pad *tvp5150_pad,
> >>>>> +			      const struct media_pad *remote, u32 flags)
> >>>>> +{
> >>>>> +	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> >>>>> +	struct tvp5150 *decoder = to_tvp5150(sd);
> >>>>> +	struct media_pad *other_tvp5150_pad =
> >>>>> +		&decoder->pads[tvp5150_pad->index ^ 1];
> >>>>> +	bool is_svideo = false;
> >>>>> +	unsigned int i;
> >>>>> +	int err;
> >>>>> +
> >>>>> +	/*
> >>>>> +	 * The TVP5150 state is determined by the enabled sink pad link(s).
> >>>>> +	 * Enabling or disabling the source pad link has no effect.
> >>>>> +	 */
> >>>>> +	if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE)
> >>>>> +		return 0;
> >>>>> +
> >>>>> +	/* Check if the svideo connector should be enabled */
> >>>>> +	for (i = 0; i < decoder->connectors_num; i++) {
> >>>>> +		if (remote->entity == &decoder->connectors[i].ent) {
> >>>> 
> >>>>> +			is_svideo =
> >>>>> +			   decoder->connectors[i].base.type == V4L2_CON_SVIDEO;
> >>>> 
> >>>> Nitpick:
> >>>> 
> >>>> I would actually prefer to keep this on a single line. Ok, it will violate
> >>>> the 80-columns, but it would be better than the above (IMHO).
> >>>> 
> >>>>> +			break;
> >>>>> +		}
> >>>>> +	}
> >>>>> +
> >>>>> +	dev_dbg_lvl(sd->dev, 1, debug, "link setup '%s':%d->'%s':%d[%d]",
> >>>>> +		    remote->entity->name, remote->index,
> >>>>> +		    tvp5150_pad->entity->name, tvp5150_pad->index,
> >>>>> +		    flags & MEDIA_LNK_FL_ENABLED);
> >>>>> +	if (is_svideo)
> >>>>> +		dev_dbg_lvl(sd->dev, 1, debug,
> >>>>> +			    "link setup '%s':%d->'%s':%d[%d]",
> >>>>> +			    remote->entity->name, remote->index,
> >>>>> +			    other_tvp5150_pad->entity->name,
> >>>>> +			    other_tvp5150_pad->index,
> >>>>> +			    flags & MEDIA_LNK_FL_ENABLED);
> >>>>> +
> >>>>> +	/*
> >>>>> +	 * The TVP5150 has an internal mux which allows the following setup:
> >>>>> +	 *
> >>>>> +	 * comp-connector1  --\
> >>>>> +	 *		       |---> AIP1A
> >>>>> +	 *		      /
> >>>>> +	 * svideo-connector -|
> >>>>> +	 *		      \
> >>>>> +	 *		       |---> AIP1B
> >>>>> +	 * comp-connector2  --/
> >>>>> +	 *
> >>>>> +	 * We can't rely on user space that the current connector gets disabled
> >>>>> +	 * first before enabling the new connector. Disable all active
> >>>>> +	 * connector links to be on the safe side.
> >>>>> +	 */
> >>>>> +	err = tvp5150_disable_all_input_links(decoder);
> >>>>> +	if (err)
> >>>>> +		return err;
> >>>>> +
> >>>>> +	tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : tvp5150_pad->index,
> >>>>> +			  flags & MEDIA_LNK_FL_ENABLED ? TVP5150_NORMAL :
> >>>>> +			  TVP5150_BLACK_SCREEN, 0);
> >>>>> +
> >>>>> +	if (flags & MEDIA_LNK_FL_ENABLED) {
> >>>>> +		/*
> >>>>> +		 * S-Video connector is conneted to both ports AIP1A and AIP1B.
> >>>>> +		 * Both links must be enabled in one-shot regardless which link
> >>>>> +		 * the user requests.
> >>>>> +		 */
> >>> 
> >>> This is a very grey area, I don't think the MC API explicitly allows
> >>> doing this. As changing links during streaming is disallowed, wouldn't
> >>> it be easier to handle the routing configuration at stream start ? You
> >>> wouldn't have to deal with this issue then, you could just return an
> >>> error if only one link is enabled. Furthermore, it would allow
> >>> supporting a configuration where a composite signal is connected to the
> >>> Y pin of the mini-DIN connector.
> >> 
> >> We discussed this a few series earlier because my first solution what
> >> like this you describe above. I changed that because Mauro had some
> >> concerns about the usability. Now this behaviour is easier to use but
> >> as you pointed out above, such 'special' handling isn't doable anymore.
> >> I would keep this solution since I want to get this series merged ;)
> >> If someone wants such a 'special' configuration he can implement it
> >> later.
> > 
> > But that would break the ABI. I'm sorry, but we need to find an
> > agreement on this issue to merge the series, it's not a detail that can
> > be addressed later. Could you start a discussion with Mauro to see if he
> > can be convinced, or if he has a better proposal ?
> 
> You're right this would break the ABI or needs some special later on
> handling introducing new dt-bindings...
> 
> Unfortunately this is the result of Mauro's proposal and I have no good
> arguments against it.

Could you propose a time for a discussion on #v4l ? I think it would be
faster that way.

> >>>>> +		if (is_svideo) {
> >>>>> +			err = tvp5150_set_link((struct media_pad *) remote,
> >>>>> +					       other_tvp5150_pad, flags);
> >>>>> +			if (err)
> >>>>> +				return err;
> >>>>> +		}
> >>>>> +	}
> >>>>> +
> >>>>> +	return 0;
> >>>>> +}
> >>>>> +
> >>>>> +static const struct media_entity_operations tvp5150_sd_media_ops = {
> >>>>> +	.link_setup = tvp5150_link_setup,
> >>>>> +};
> >>>>> +#endif
> >>>>>  /****************************************************************************
> >>>>>  			I2C Command
> >>>>>   ****************************************************************************/
> >>>>> @@ -1314,6 +1452,65 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
> >>>>>  	return 0;
> >>>>>  }
> >>>>>  
> >>>>> +static int tvp5150_registered(struct v4l2_subdev *sd)
> >>>>> +{
> >>>>> +#if defined(CONFIG_MEDIA_CONTROLLER)
> >>>>> +	struct tvp5150 *decoder = to_tvp5150(sd);
> >>>>> +	unsigned int i;
> >>>>> +	int ret;
> >>>>> +
> >>>>> +	/*
> >>>>> +	 * Setup connector pads and links. Enable the link to the first
> >>>>> +	 * available connector per default.
> >>>>> +	 */
> >>>>> +	for (i = 0; i < decoder->connectors_num; i++) {
> >>>>> +		struct media_entity *con = &decoder->connectors[i].ent;
> >>>>> +		struct media_pad *pad = &decoder->connectors[i].pad;
> >>>>> +		unsigned int port = decoder->connectors[i].base.remote_port;
> >>>>> +		bool is_svideo =
> >>>>> +			decoder->connectors[i].base.type == V4L2_CON_SVIDEO;
> >>>>> +		int flags = i ? 0 : MEDIA_LNK_FL_ENABLED;
> >>> 
> >>> The flags passed to media_create_pad_link() are unsigned.
> >> 
> >> You are right, changed that.
> >> 
> >>>>> +
> >>>>> +		pad->flags = MEDIA_PAD_FL_SOURCE;
> >>>>> +		ret = media_entity_pads_init(con, 1, pad);
> >>>>> +		if (ret < 0)
> >>>>> +			return ret;
> >>>>> +
> >>>>> +		ret = media_device_register_entity(sd->v4l2_dev->mdev, con);
> >>>>> +		if (ret < 0)
> >>>>> +			return ret;
> >>>>> +
> >>>>> +		ret = media_create_pad_link(con, 0, &sd->entity, port, flags);
> >>>>> +		if (ret < 0) {
> >>>>> +			media_device_unregister_entity(con);
> >>>>> +			return ret;
> >>>>> +		}
> >>> 
> >>> Will the other registered media entities be unregistered correctly ?
> >> 
> >> Good point. I add a seperate error handling to ensure all registered
> >> entities gets unregistered.
> >> 
> >>>>> +
> >>>>> +		if (is_svideo) {
> >>>>> +			/* svideo links to both aip1a and aip1b */
> >>>>> +			ret = media_create_pad_link(con, 0, &sd->entity,
> >>>>> +						    port + 1, flags);
> >>> 
> >>> Does the TVP5150 support both connecting Y to AIP1A and C to AIP1B, and
> >>> Y to AIP1B and C to AIP1A ? If so the port + 1 won't always work.
> >> 
> >> No, if I understood the datasheet right Y is always connected to AIP1A
> >> and C to AIP1B. Since I improved the struct v4l2_fwnode_connector to
> >> hold more connector-port information the 'port+1' logic isn't used
> >> anymore.
> >> 
> >>>>> +			if (ret < 0) {
> >>>>> +				media_device_unregister_entity(con);
> >>>>> +				return ret;
> >>>>> +			}
> >>>>> +		}
> >>>>> +
> >>>>> +		/* enable default input */
> >>>>> +		if (flags == MEDIA_LNK_FL_ENABLED) {
> >>>>> +			decoder->input =
> >>>>> +				is_svideo ? TVP5150_SVIDEO :
> >>>>> +				port == 0 ? TVP5150_COMPOSITE0 :
> >>>>> +				TVP5150_COMPOSITE1;
> >>>>> +
> >>>>> +			tvp5150_selmux(sd);
> >>>>> +		}
> >>> 
> >>> You could move this after the loop and operation on
> >>> decoder->connectors[0]. Hopefully you could then use if's instead of
> >>> nested ? : operators, as the above isn't very readable.
> >> 
> >> That's also doable. Mauro which solution do you prefer?
> >> 
> >>>>> +	}
> >>>>> +#endif
> >>>>> +	return 0;
> >>>>> +}
> >>>>> +
> >>>>> +
> >>> 
> >>> One blank line is enough.
> >> 
> >> Fixed.
> >> 
> >>>>>  /* ----------------------------------------------------------------------- */
> >>>>>  
> >>>>>  static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
> >>>>> @@ -1367,6 +1564,10 @@ static const struct v4l2_subdev_ops tvp5150_ops = {
> >>>>>  	.pad = &tvp5150_pad_ops,
> >>>>>  };
> >>>>>  
> >>>>> +static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
> >>>>> +	.registered = tvp5150_registered,
> >>>>> +};
> >>>>> +
> >>>>>  /****************************************************************************
> >>>>>  			I2C Client & Driver
> >>>>>   ****************************************************************************/
> >>>>> @@ -1515,38 +1716,168 @@ static int tvp5150_init(struct i2c_client *c)
> >>>>>  	return 0;
> >>>>>  }
> >>>>>  
> >>>>> -static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
> >>>>> +#if defined(CONFIG_MEDIA_CONTROLLER)
> >>>>> +static int tvp5150_add_of_connectors(struct tvp5150 *decoder)
> >>>>>  {
> >>>>> -	struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
> >>>>> -	struct device_node *ep;
> >>>>> -	unsigned int flags;
> >>>>> -	int ret = 0;
> >>>>> +	struct device *dev = decoder->sd.dev;
> >>> 
> >>> You use dev in a singla location, I think you could use decoder->sd.dev
> >>> directly.
> >> 
> >> This function is no longer used but you're right.
> >> 
> >>> 
> >>>>> +	struct tvp5150_connector *connectors;
> >>>>> +	unsigned int connectors_num = decoder->connectors_num;
> >>>>> +	int i, ret;
> >>> 
> >>> i is never negative, you can make it an unsiged int.
> >>> 
> >>>>>  
> >>>>> -	ep = of_graph_get_next_endpoint(np, NULL);
> >>>>> -	if (!ep)
> >>>>> -		return -EINVAL;
> >>>>> +	/*
> >>>>> +	 * Only add of_connectors if device really is a OF device since
> >>>>> +	 * the driver is used by usb devices e.g. em28xx and embedded
> >>>>> +	 * devices.
> >>>>> +	 */
> >>>>> +	if (!decoder->connectors_num)
> >>> 
> >>> Maybe if (!connectors_num) ?
> >>> 
> >>>>> +		return 0;
> >>>>>  
> >>>>> -	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
> >>>>> -	if (ret)
> >>>>> -		goto err;
> >>>>> +	/* Allocate and initialize all available input connectors */
> >>>>> +	connectors = devm_kcalloc(dev, connectors_num, sizeof(*connectors),
> >>>>> +				  GFP_KERNEL);
> >>>>> +	if (!connectors)
> >>>>> +		return -ENOMEM;
> >>>>> +
> >>>>> +	for (i = 0; i < connectors_num; i++) {
> >>>>> +		struct v4l2_fwnode_connector *c = &connectors[i].base;
> >>>>> +
> >>>>> +		ret = v4l2_fwnode_parse_connector(
> >>>>> +				   of_fwnode_handle(decoder->endpoints[i]), c);
> >>> 
> >>> I think you should handle errors here.
> >>> 
> >>>>> +
> >>>>> +		connectors[i].ent.flags = MEDIA_ENT_FL_CONNECTOR;
> >>>>> +		connectors[i].ent.function = c->type == V4L2_CON_SVIDEO ?
> >>>>> +			MEDIA_ENT_F_CONN_SVIDEO : MEDIA_ENT_F_CONN_COMPOSITE;
> >>>>> +		connectors[i].ent.name = c->label;
> >>> 
> >>> I don't think using the label as the entity name is a good idea, as we
> >>> require entity names to be unique, and labels offer no such guarantee.
> >> 
> >> Good point. What about <connector dt-name>:<label>? The devicetree name
> >> is unique.
> > 
> > That should work. Is there a risk it wouldn't fit in the entity name
> > field though ?
> > 
> >>>>> +	}
> >>>>> +
> >>>>> +	decoder->connectors = connectors;
> >>>>> +
> >>>>> +	return 0;
> >>>>> +}
> >>>>> +
> >>>>> +static int tvp5150_mc_init(struct tvp5150 *decoder)
> >>>>> +{
> >>>>> +	struct v4l2_subdev *sd = &decoder->sd;
> >>>>> +	unsigned int i;
> >>>>> +
> >>>>> +	sd->entity.ops = &tvp5150_sd_media_ops;
> >>>>> +	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
> >>>>> +
> >>>>> +	/* Initialize all TVP5150 pads */
> >>>>> +	for (i = 0; i < TVP5150_NUM_PADS; i++) {
> >>>>> +		if (i < TVP5150_NUM_PADS - 1) {
> >>>>> +			decoder->pads[i].flags = MEDIA_PAD_FL_SINK;
> >>>>> +			decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG;
> >>>>> +		} else {
> >>>>> +			decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE;
> >>>>> +			decoder->pads[i].sig_type = PAD_SIGNAL_DV;
> >>>>> +		}
> >>>>> +	}
> >>> 
> >>> You can simplify this to
> >>> 
> >>> 	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {
> >>> 		decoder->pads[i].flags = MEDIA_PAD_FL_SINK;
> >>> 		decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG;
> >>> 	}
> >>> 
> >>> 	decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE;
> >>> 	decoder->pads[i].sig_type = PAD_SIGNAL_DV;
> >> 
> >> Yes, already done.
> >> 
> >>>>> +
> >>>>> +	return media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS,
> >>>>> +				      decoder->pads);
> >>>>> +}
> >>>>> +
> >>>>> +#else /* !defined(CONFIG_MEDIA_CONTROLLER) */
> >>>>> +
> >>>>> +static inline int tvp5150_add_of_connectors(struct tvp5150 *decoder)
> >>>>> +{
> >>>>> +	return 0;
> >>>>> +}
> >>>>>  
> >>>>> -	flags = bus_cfg.bus.parallel.flags;
> >>>>> +static inline int tvp5150_mc_init(struct tvp5150 *decoder)
> >>>>> +{
> >>>>> +	return 0;
> >>>>> +}
> >>>>> +#endif /* defined(CONFIG_MEDIA_CONTROLLER) */
> >>>>>  
> >>>>> -	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
> >>>>> -	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
> >>>>> -	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
> >>>>> -	      flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
> >>>>> +static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
> >>>>> +{
> >>>>> +	struct device *dev = decoder->sd.dev;
> >>>>> +	struct device_node *ep_np;
> >>>>> +	unsigned int i = 0, in = 0;
> >>> 
> >>> Let's rename in to num_inputs or num_connectors.
> >> 
> >> I refactored the code, so in is no longer used.
> >> 
> >>>>> +	int ret;
> >>>>> +	bool found = false;
> >>>>> +
> >>>>> +	/* at least 1 output and 1 input */
> >>>>> +	decoder->endpoints_num = of_graph_get_endpoint_count(np);
> >>>>> +	if (decoder->endpoints_num < 2 || decoder->endpoints_num > 4) {
> >>>>> +		dev_err(dev, "At least 1 input and 1 output must be connected to the device.\n");
> >>>>>  		ret = -EINVAL;
> >>>>>  		goto err;
> >>>>>  	}
> >>>>>  
> >>>>> -	decoder->mbus_type = bus_cfg.bus_type;
> >>>>> +	for_each_endpoint_of_node(np, ep_np) {
> >>>>> +		struct v4l2_fwnode_endpoint bus_cfg = {
> >>>>> +			.bus_type = V4L2_MBUS_UNKNOWN
> >>>>> +		};
> >>>>> +		struct v4l2_fwnode_connector c;
> >>>>> +		struct of_endpoint ep;
> >>>>> +		unsigned int flags;
> >>>>> +
> >>>>> +		of_graph_parse_endpoint(ep_np, &ep);
> >>>>> +		switch (ep.port) {
> >>>>> +		case TVP5150_PAD_AIP1A:
> >>>>> +			/* fall through */
> >>> 
> >>> I don't think you need this comment.
> >>> 
> >>>>> +		case TVP5150_PAD_AIP1B:
> >>>>> +			ret = v4l2_fwnode_parse_connector(
> >>>>> +						   of_fwnode_handle(ep_np), &c);
> >>> 
> >>> You use of_fwnode_handle(ep_np) twice, you could move it outside of the
> >>> switch () to keep lines shorter.
> >>> 
> >>>>> +			if (c.type != V4L2_CON_COMPOSITE &&
> >>>>> +			    c.type != V4L2_CON_SVIDEO) {
> >>>>> +				dev_err(dev,
> >>>>> +					"Invalid endpoint %d on port %d\n",
> >>> 
> >>> The correct format specifier for unsigned int is %u.
> >>> 
> >>> Should the error message be more explicit ? "Invalid connector type for
> >>> port@%u/endpoint@%u" ?
> >>> 
> >>> 
> >>>>> +					c.remote_id, c.remote_port);
> >>>>> +				ret = -EINVAL;
> >>>>> +				goto err;
> >>> 
> >>> If you break out of the loop you need an of_node_put(ep_np).
> >>> Alternatively, you could store ep_np in the endpoints array right before
> >>> of_graph_parse_endpoint() and call of_node_put() right after
> >>> of_graph_parse_endpoint().
> >>> 
> >>>>> +			}
> >>>>> +			in++;
> >>>>> +			break;
> >>>>> +		case TVP5150_PAD_VID_OUT:
> >>>>> +			ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np),
> >>>>> +							 &bus_cfg);
> >>>>> +			if (ret)
> >>>>> +				goto err;
> >>>>> +
> >>>>> +			flags = bus_cfg.bus.parallel.flags;
> >>>>> +
> >>>>> +			if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
> >>>>> +			    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
> >>>>> +			      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
> >>>>> +			      flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
> >>>>> +				ret = -EINVAL;
> >>>>> +				goto err;
> >>>>> +			}
> >>>>> +
> >>>>> +			decoder->mbus_type = bus_cfg.bus_type;
> >>>>> +			break;
> >>>>> +		default:
> >>>>> +			dev_err(dev, "Invalid port %d for endpoint %pOF\n",
> >>> 
> >>> %u here too.
> >>> 
> >>>>> +				ep.port, ep.local_node);
> >>>>> +			ret = -EINVAL;
> >>>>> +			goto err;
> >>>>> +		}
> >>>>> +
> >>>>> +		of_node_get(ep_np);
> >>>>> +		decoder->endpoints[i] = ep_np;
> >>>>> +		i++;
> >>>>> +
> >>>>> +		found = true;
> >>>>> +	}
> >>>>>  
> >>>>> +	decoder->connectors_num = in;
> >>>>> +	return found ? 0 : -ENODEV;
> >>>>>  err:
> >>>>> -	of_node_put(ep);
> >>>>>  	return ret;
> >>> 
> >>> You can remove the err label and return ret directly.
> >> 
> >> I took your comments into account for the refactored function, thanks.
> >> 
> >>>>>  }
> >>>>>  
> >>>>> +static void tvp5150_dt_cleanup(struct tvp5150 *decoder)
> >>>>> +{
> >>>>> +	unsigned int i;
> >>>>> +
> >>>>> +	for (i = 0; i < TVP5150_NUM_PADS; i++)
> >>>>> +		of_node_put(decoder->endpoints[i]);
> >>>>> +}
> >>>>> +
> >>>>>  static const char * const tvp5150_test_patterns[2] = {
> >>>>>  	"Disabled",
> >>>>>  	"Black screen"
> >>>>> @@ -1585,7 +1916,7 @@ static int tvp5150_probe(struct i2c_client *c,
> >>>>>  		res = tvp5150_parse_dt(core, np);
> >>>>>  		if (res) {
> >>>>>  			dev_err(sd->dev, "DT parsing error: %d\n", res);
> >>>>> -			return res;
> >>>>> +			goto err_cleanup_dt;
> >>>>>  		}
> >>>>>  	} else {
> >>>>>  		/* Default to BT.656 embedded sync */
> >>>>> @@ -1593,25 +1924,20 @@ static int tvp5150_probe(struct i2c_client *c,
> >>>>>  	}
> >>>>>  
> >>>>>  	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
> >>>>> +	sd->internal_ops = &tvp5150_internal_ops;
> >>>>>  	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> >>>>>  
> >>>>> -#if defined(CONFIG_MEDIA_CONTROLLER)
> >>>>> -	core->pads[TVP5150_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
> >>>>> -	core->pads[TVP5150_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG;
> >>>>> -	core->pads[TVP5150_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
> >>>>> -	core->pads[TVP5150_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV;
> >>>>> -
> >>>>> -	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
> >>>>> -
> >>>>> -	res = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, core->pads);
> >>>>> -	if (res < 0)
> >>>>> -		return res;
> >>>>> +	res = tvp5150_mc_init(core);
> >>>>> +	if (res)
> >>>>> +		goto err_cleanup_dt;
> >>>>>  
> >>>>> -#endif
> >>>>> +	res = tvp5150_add_of_connectors(core);
> >>>>> +	if (res)
> >>>>> +		goto err_cleanup_dt;
> >>>>>  
> >>>>>  	res = tvp5150_detect_version(core);
> >>>>>  	if (res < 0)
> >>>>> -		return res;
> >>>>> +		goto err_cleanup_dt;
> >>>>>  
> >>>>>  	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
> >>>>>  	core->detected_norm = V4L2_STD_UNKNOWN;
> >>>>> @@ -1637,7 +1963,7 @@ static int tvp5150_probe(struct i2c_client *c,
> >>>>>  	sd->ctrl_handler = &core->hdl;
> >>>>>  	if (core->hdl.error) {
> >>>>>  		res = core->hdl.error;
> >>>>> -		goto err;
> >>>>> +		goto err_free_v4l2_ctrls;
> >>>>>  	}
> >>>>>  
> >>>>>  	tvp5150_set_default(tvp5150_read_std(sd), &core->rect);
> >>>>> @@ -1649,19 +1975,24 @@ static int tvp5150_probe(struct i2c_client *c,
> >>>>>  						tvp5150_isr, IRQF_TRIGGER_HIGH |
> >>>>>  						IRQF_ONESHOT, "tvp5150", core);
> >>>>>  		if (res)
> >>>>> -			goto err;
> >>>>> +			goto err_free_v4l2_ctrls;
> >>>>>  	}
> >>>>>  
> >>>>>  	res = v4l2_async_register_subdev(sd);
> >>>>>  	if (res < 0)
> >>>>> -		goto err;
> >>>>> +		goto err_free_v4l2_ctrls;
> >>>>>  
> >>>>>  	if (debug > 1)
> >>>>>  		tvp5150_log_status(sd);
> >>>>> +
> >>>>>  	return 0;
> >>>>>  
> >>>>> -err:
> >>>>> +err_free_v4l2_ctrls:
> >>>>>  	v4l2_ctrl_handler_free(&core->hdl);
> >>>>> +err_cleanup_dt:
> >>>>> +	if (IS_ENABLED(CONFIG_OF) && np)
> >>>>> +		tvp5150_dt_cleanup(core);
> >>>>> +
> >>>>>  	return res;
> >>>>>  }
> >>>>>  

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux