Hi Jan,
I've been running for a couple of weeks now with your two patches applied:
1) dvbsky: add MyGica T230
2) remove t230 from cxusb
Everything has been working perfectly - the checksum errors when
scanning muxes have gone, and streaming has been working nicely.
Tested-by: James Hutchinson <jahutchinson99@xxxxxxxxxxxxxx>
Regards,
James
On Tue, 23 Jul 2019 at 17:02, James Hutchinson
<jahutchinson99@xxxxxxxxxxxxxx> wrote:
>
> Hi Jan,
>
> My initial testing of your two patches to move the T230 to the dvbsky
> module looks good so far.
>
> I'm testing on an 8th Gen NUC (8i3BEH) 16GB RAM, 2 x MyGica T230 T2
> USB tuners, and 2 x DVBSky S960 S2 tuners.
>
> This machine is running Debian stretch with the Debian 4.19.37
> backport kernel (incl. your two patches to move the T230 to the dvbsky
> module).
>
> I have a test script that performs 200x consecutive tvheadend network scans...
> This was executed against the UK Freeview network (6 muxes) =~1,200
> tuning requests. This took a couple of hours, but not a single
> checksum error.
>
> I moved onto streaming various channels and didn't have any problems
> so far. I only noted a couple of minor picture disturbances
> (continuity counter errors) when i tried to record two HD channels
> whilst watching a 3rd on the same mux. I'm not sure whether this was
> pushing things too far, and would like to carry out similar tests on a
> known working 4.9.x kernel.
>
> I'll do more testing over the next couple of weeks and report back.
>
> Also adding Thomas who has the same issue with the T230 tuner and
> bisected to issue to the same problematic commit as me.
>
> Regards,
> James.
>
>
>
> On Mon, 22 Jul 2019 at 17:22, Jan Pieter van Woerkom <jp@xxxxxxx> wrote:
> >
> > remove t230 from cxusb
> >
> > Signed-off-by: Jan Pieter van Woerkom <jp@xxxxxxx>
> > ---
> > diff -ru a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
> > --- a/drivers/media/usb/dvb-usb/cxusb.c 2019-07-08 00:41:56.000000000 +0200
> > +++ b/drivers/media/usb/dvb-usb/cxusb.c 2019-07-22 17:34:51.550698820 +0200
> > @@ -369,26 +369,6 @@
> > return 0;
> > }
> >
> > -static int cxusb_read_status(struct dvb_frontend *fe,
> > - enum fe_status *status)
> > -{
> > - struct dvb_usb_adapter *adap = (struct dvb_usb_adapter *)fe->dvb->priv;
> > - struct cxusb_state *state = (struct cxusb_state *)adap->dev->priv;
> > - int ret;
> > -
> > - ret = state->fe_read_status(fe, status);
> > -
> > - /* it need resync slave fifo when signal change from unlock to lock.*/
> > - if ((*status & FE_HAS_LOCK) && (!state->last_lock)) {
> > - mutex_lock(&state->stream_mutex);
> > - cxusb_streaming_ctrl(adap, 1);
> > - mutex_unlock(&state->stream_mutex);
> > - }
> > -
> > - state->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0;
> > - return ret;
> > -}
> > -
> > static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d)
> > {
> > int ep = d->props.generic_bulk_ctrl_endpoint;
> > @@ -1164,83 +1144,6 @@
> > return 0;
> > }
> >
> > -static int cxusb_mygica_t230_frontend_attach(struct dvb_usb_adapter *adap)
> > -{
> > - struct dvb_usb_device *d = adap->dev;
> > - struct cxusb_state *st = d->priv;
> > - struct i2c_adapter *adapter;
> > - struct i2c_client *client_demod;
> > - struct i2c_client *client_tuner;
> > - struct i2c_board_info info;
> > - struct si2168_config si2168_config;
> > - struct si2157_config si2157_config;
> > -
> > - /* Select required USB configuration */
> > - if (usb_set_interface(d->udev, 0, 0) < 0)
> > - err("set interface failed");
> > -
> > - /* Unblock all USB pipes */
> > - usb_clear_halt(d->udev,
> > - usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
> > - usb_clear_halt(d->udev,
> > - usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
> > - usb_clear_halt(d->udev,
> > - usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint));
> > -
> > - /* attach frontend */
> > - si2168_config.i2c_adapter = &adapter;
> > - si2168_config.fe = &adap->fe_adap[0].fe;
> > - si2168_config.ts_mode = SI2168_TS_PARALLEL;
> > - si2168_config.ts_clock_inv = 1;
> > - memset(&info, 0, sizeof(struct i2c_board_info));
> > - strscpy(info.type, "si2168", I2C_NAME_SIZE);
> > - info.addr = 0x64;
> > - info.platform_data = &si2168_config;
> > - request_module(info.type);
> > - client_demod = i2c_new_device(&d->i2c_adap, &info);
> > - if (client_demod == NULL || client_demod->dev.driver == NULL)
> > - return -ENODEV;
> > -
> > - if (!try_module_get(client_demod->dev.driver->owner)) {
> > - i2c_unregister_device(client_demod);
> > - return -ENODEV;
> > - }
> > -
> > - st->i2c_client_demod = client_demod;
> > -
> > - /* attach tuner */
> > - memset(&si2157_config, 0, sizeof(si2157_config));
> > - si2157_config.fe = adap->fe_adap[0].fe;
> > - si2157_config.if_port = 1;
> > - memset(&info, 0, sizeof(struct i2c_board_info));
> > - strscpy(info.type, "si2157", I2C_NAME_SIZE);
> > - info.addr = 0x60;
> > - info.platform_data = &si2157_config;
> > - request_module(info.type);
> > - client_tuner = i2c_new_device(adapter, &info);
> > - if (client_tuner == NULL || client_tuner->dev.driver == NULL) {
> > - module_put(client_demod->dev.driver->owner);
> > - i2c_unregister_device(client_demod);
> > - return -ENODEV;
> > - }
> > - if (!try_module_get(client_tuner->dev.driver->owner)) {
> > - i2c_unregister_device(client_tuner);
> > - module_put(client_demod->dev.driver->owner);
> > - i2c_unregister_device(client_demod);
> > - return -ENODEV;
> > - }
> > -
> > - st->i2c_client_tuner = client_tuner;
> > -
> > - /* hook fe: need to resync the slave fifo when signal locks. */
> > - mutex_init(&st->stream_mutex);
> > - st->last_lock = 0;
> > - st->fe_read_status = adap->fe_adap[0].fe->ops.read_status;
> > - adap->fe_adap[0].fe->ops.read_status = cxusb_read_status;
> > -
> > - return 0;
> > -}
> > -
> > /*
> > * DViCO has shipped two devices with the same USB ID, but only one of them
> > * needs a firmware download. Check the device class details to see if they
> > @@ -1322,7 +1225,6 @@
> > static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
> > static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
> > static struct dvb_usb_device_properties cxusb_mygica_d689_properties;
> > -static struct dvb_usb_device_properties cxusb_mygica_t230_properties;
> >
> > static int cxusb_probe(struct usb_interface *intf,
> > const struct usb_device_id *id)
> > @@ -1353,8 +1255,6 @@
> > THIS_MODULE, NULL, adapter_nr) ||
> > 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
> > THIS_MODULE, NULL, adapter_nr) ||
> > - 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties,
> > - THIS_MODULE, NULL, adapter_nr) ||
> > 0)
> > return 0;
> >
> > @@ -1405,7 +1305,6 @@
> > DVICO_BLUEBIRD_DUAL_4_REV_2,
> > CONEXANT_D680_DMB,
> > MYGICA_D689,
> > - MYGICA_T230,
> > NR__cxusb_table_index
> > };
> >
> > @@ -1470,9 +1369,6 @@
> > [MYGICA_D689] = {
> > USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689)
> > },
> > - [MYGICA_T230] = {
> > - USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230)
> > - },
> > {} /* Terminating entry */
> > };
> > MODULE_DEVICE_TABLE (usb, cxusb_table);
> > @@ -2128,60 +2024,6 @@
> > },
> > }
> > };
> > -
> > -static struct dvb_usb_device_properties cxusb_mygica_t230_properties = {
> > - .caps = DVB_USB_IS_AN_I2C_ADAPTER,
> > -
> > - .usb_ctrl = CYPRESS_FX2,
> > -
> > - .size_of_priv = sizeof(struct cxusb_state),
> > -
> > - .num_adapters = 1,
> > - .adapter = {
> > - {
> > - .num_frontends = 1,
> > - .fe = {{
> > - .streaming_ctrl = cxusb_streaming_ctrl,
> > - .frontend_attach = cxusb_mygica_t230_frontend_attach,
> > -
> > - /* parameter for the MPEG2-data transfer */
> > - .stream = {
> > - .type = USB_BULK,
> > - .count = 5,
> > - .endpoint = 0x02,
> > - .u = {
> > - .bulk = {
> > - .buffersize = 8192,
> > - }
> > - }
> > - },
> > - } },
> > - },
> > - },
> > -
> > - .power_ctrl = cxusb_d680_dmb_power_ctrl,
> > -
> > - .i2c_algo = &cxusb_i2c_algo,
> > -
> > - .generic_bulk_ctrl_endpoint = 0x01,
> > -
> > - .rc.core = {
> > - .rc_interval = 100,
> > - .rc_codes = RC_MAP_D680_DMB,
> > - .module_name = KBUILD_MODNAME,
> > - .rc_query = cxusb_d680_dmb_rc_query,
> > - .allowed_protos = RC_PROTO_BIT_UNKNOWN,
> > - },
> > -
> > - .num_device_descs = 1,
> > - .devices = {
> > - {
> > - "Mygica T230 DVB-T/T2/C",
> > - { NULL },
> > - { &cxusb_table[MYGICA_T230], NULL },
> > - },
> > - }
> > -};
> >
> > static struct usb_driver cxusb_driver = {
> > .name = "dvb_usb_cxusb",
