Allow selecting the IR protocol, MCE or iMON, for a device that identifies as follows (with config id 0x7e): 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller As the driver is structured to default to iMON when both RC protocols are supported, existing users of this device (using MCE protocol) will need to manually switch to MCE (RC-6) protocol from userspace (with ir-keytable, sysfs). Signed-off-by: Darius Rad <alpha@xxxxxxxxxx> --- The hardware I have (described in the commit) only supports the iMON protocol; whereas the driver only supports the MCE protocol. The unfortunate side effect of this change is that the default setting will cause problems for existing users. Allowing a different default protocol for this device will take more invasive changes. If it will help this patch be accepted, I can propose such changes. drivers/media/rc/imon.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 7bee72108b0e..37a850421fbb 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1826,12 +1826,17 @@ static void imon_get_ffdc_type(struct imon_context *ictx) break; /* iMON VFD, MCE IR */ case 0x46: - case 0x7e: case 0x9e: dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR"); detected_display_type = IMON_DISPLAY_TYPE_VFD; allowed_protos = RC_PROTO_BIT_RC6_MCE; break; + /* iMON VFD, iMON or MCE IR */ + case 0x7e: + dev_info(ictx->dev, "0xffdc iMON VFD, iMON or MCE IR"); + detected_display_type = IMON_DISPLAY_TYPE_VFD; + allowed_protos |= RC_PROTO_BIT_RC6_MCE; + break; /* iMON LCD, MCE IR */ case 0x9f: dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR"); -- 2.20.1
