Later datasheet versions (rev 1.00) clarifies that the FLD register should be set after LINKCNT. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> Reviewed-by: Ulrich Hecht <uli+renesas@xxxxxxxx> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- drivers/media/platform/rcar-vin/rcar-csi2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c index 0a4a71be60bee89b..b8017743b2dcfb08 100644 --- a/drivers/media/platform/rcar-vin/rcar-csi2.c +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c @@ -530,7 +530,6 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv) rcsi2_write(priv, PHTC_REG, 0); /* Configure */ - rcsi2_write(priv, FLD_REG, fld); rcsi2_write(priv, VCDT_REG, vcdt); if (vcdt2) rcsi2_write(priv, VCDT2_REG, vcdt2); @@ -561,6 +560,7 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv) rcsi2_write(priv, PHYCNT_REG, phycnt); rcsi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN | LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP); + rcsi2_write(priv, FLD_REG, fld); rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ); rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ); -- 2.21.0
