On Thu, Feb 21, 2019 at 10:20:20AM -0600, Benoit Parrot wrote: > Hi Maxime, > > A couple of questions, > > Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote on Thu [2018-Oct-11 04:21:00 -0500]: > > The clock rate, while hardcoded until now, is actually a function of the > > resolution, framerate and bytes per pixel. Now that we have an algorithm to > > adjust our clock rate, we can select it dynamically when we change the > > mode. > > > > This changes a bit the clock rate being used, with the following effect: > > > > +------+------+------+------+-----+-----------------+----------------+-----------+ > > | Hact | Vact | Htot | Vtot | FPS | Hardcoded clock | Computed clock | Deviation | > > +------+------+------+------+-----+-----------------+----------------+-----------+ > > | 640 | 480 | 1896 | 1080 | 15 | 56000000 | 61430400 | 8.84 % | > > | 640 | 480 | 1896 | 1080 | 30 | 112000000 | 122860800 | 8.84 % | > > | 1024 | 768 | 1896 | 1080 | 15 | 56000000 | 61430400 | 8.84 % | > > | 1024 | 768 | 1896 | 1080 | 30 | 112000000 | 122860800 | 8.84 % | > > | 320 | 240 | 1896 | 984 | 15 | 56000000 | 55969920 | 0.05 % | > > | 320 | 240 | 1896 | 984 | 30 | 112000000 | 111939840 | 0.05 % | > > | 176 | 144 | 1896 | 984 | 15 | 56000000 | 55969920 | 0.05 % | > > | 176 | 144 | 1896 | 984 | 30 | 112000000 | 111939840 | 0.05 % | > > | 720 | 480 | 1896 | 984 | 15 | 56000000 | 55969920 | 0.05 % | > > | 720 | 480 | 1896 | 984 | 30 | 112000000 | 111939840 | 0.05 % | > > | 720 | 576 | 1896 | 984 | 15 | 56000000 | 55969920 | 0.05 % | > > | 720 | 576 | 1896 | 984 | 30 | 112000000 | 111939840 | 0.05 % | > > | 1280 | 720 | 1892 | 740 | 15 | 42000000 | 42002400 | 0.01 % | > > | 1280 | 720 | 1892 | 740 | 30 | 84000000 | 84004800 | 0.01 % | > > | 1920 | 1080 | 2500 | 1120 | 15 | 84000000 | 84000000 | 0.00 % | > > | 1920 | 1080 | 2500 | 1120 | 30 | 168000000 | 168000000 | 0.00 % | > > | 2592 | 1944 | 2844 | 1944 | 15 | 84000000 | 165862080 | 49.36 % | > > +------+------+------+------+-----+-----------------+----------------+-----------+ > > Is the computed clock above the same for both parallel and CSI2? > > I want to add controls for PIXEL_RATE and LINK_FREQ, would you have any > quick pointer on taking the computed clock and translating that into the > PIXEL_RATE and LINK_FREQ values? > > I am trying to use this sensor with TI CAL driver which at the moment uses > the PIXEL_RATE values in order to compute ths_settle and ths_term values > needed to program the DPHY properly. This is similar in behavior as the way > omap3isp relies on this info as well. I haven't looked that much into the csi-2 case, but the pixel rate should be the same at least. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
