Hello,
Thank you for your patch.
On Thu, Jan 10, 2019 at 06:56:23PM +0900, tskd08@xxxxxxxxx wrote:
> From: Akihiro Tsukada <tskd08@xxxxxxxxx>
>
> earth-pt1 driver was decomposed/restructured by the commit: b732539efdba
> ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers"),
> but it introduced a problem regarding concurrent streaming:
> Opening a new terrestial stream stops the reception of an existing,
> already-opened satellite stream.
>
> The demod IC in earth-pt1 boards contains 2 pairs of terr. and sat. blocks,
> supporting 4 concurrent demodulations, and the above problem was because
> the config of a terr. block contained whole reset/init of the pair blocks,
> thus each open() of a terrestrial frontend wrongly cleared the config of
> its peer satellite block of the demod.
> This whole/pair reset should be executed earlier and not on each open().
>
> Fixes: b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers")
> Signed-off-by: Akihiro Tsukada <tskd08@xxxxxxxxx>
> ---
> drivers/media/pci/pt1/pt1.c | 54 ++++++++++++++++++++++++++++++++-----
> 1 file changed, 48 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c
> index f4b8030e236..403f88ee3d9 100644
> --- a/drivers/media/pci/pt1/pt1.c
> +++ b/drivers/media/pci/pt1/pt1.c
> @@ -200,16 +200,10 @@ static const u8 va1j5jf8007t_25mhz_configs[][2] = {
> static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk)
> {
> int ret;
> - u8 buf[2] = {0x01, 0x80};
> bool is_sat;
> const u8 (*cfg_data)[2];
> int i, len;
>
> - ret = i2c_master_send(cl, buf, 2);
> - if (ret < 0)
> - return ret;
> - usleep_range(30000, 50000);
> -
> is_sat = !strncmp(cl->name, TC90522_I2C_DEV_SAT,
> strlen(TC90522_I2C_DEV_SAT));
> if (is_sat) {
> @@ -260,6 +254,46 @@ static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk)
> return 0;
> }
>
> +/*
> + * Init registers for (each pair of) terrestrial/satellite block in demod.
> + * Note that resetting terr. block also resets its peer sat. block as well.
> + * This function must be called before configuring any demod block
> + * (before pt1_wakeup(), fe->ops.init()).
> + */
> +static int pt1_demod_block_init(struct pt1 *pt1)
> +{
> + struct i2c_client *cl;
> + u8 buf[2] = {0x01, 0x80};
> + int ret;
> + int i;
> +
> + /* reset all terr. & sat. pairs first */
> + for (i = 0; i < PT1_NR_ADAPS; i++) {
> + cl = pt1->adaps[i]->demod_i2c_client;
> + if (strncmp(cl->name, TC90522_I2C_DEV_TER,
> + strlen(TC90522_I2C_DEV_TER)))
> + continue;
> +
> + ret = i2c_master_send(cl, buf, 2);
> + if (ret < 0)
> + return ret;
> + usleep_range(30000, 50000);
> + }
> +
> + for (i = 0; i < PT1_NR_ADAPS; i++) {
> + cl = pt1->adaps[i]->demod_i2c_client;
> + if (strncmp(cl->name, TC90522_I2C_DEV_SAT,
> + strlen(TC90522_I2C_DEV_SAT)))
> + continue;
> +
> + ret = i2c_master_send(cl, buf, 2);
> + if (ret < 0)
> + return ret;
> + usleep_range(30000, 50000);
> + }
It might be possible to simplify the code a little by using strcmp() and
making it into one loop, like so:
for (i = 0; i < PT1_NR_ADAPS; i++) {
cl = pt1->adaps[i]->demod_i2c_client;
if (strcmp(cl->name, TC90522_I2C_DEV_SAT) &&
strcmp(cl->name, TC90522_I2C_DEV_TER))
continue;
ret = i2c_master_send(cl, buf, 2);
if (ret < 0)
return ret;
usleep_range(30000, 50000);
}
> + return 0;
> +}
> +
> static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data)
> {
> writel(data, pt1->regs + reg * 4);
> @@ -987,6 +1021,10 @@ static int pt1_init_frontends(struct pt1 *pt1)
> goto tuner_release;
> }
>
> + ret = pt1_demod_block_init(pt1);
> + if (ret < 0)
> + goto fe_unregister;
> +
> return 0;
>
> tuner_release:
> @@ -1245,6 +1283,10 @@ static int pt1_resume(struct device *dev)
> pt1_update_power(pt1);
> usleep_range(1000, 2000);
>
> + ret = pt1_demod_block_init(pt1);
> + if (ret < 0)
> + goto resume_err;
> +
> for (i = 0; i < PT1_NR_ADAPS; i++)
> dvb_frontend_reinitialise(pt1->adaps[i]->fe);
>
> --
> 2.20.1
Many thanks,
Sean
