[PATCH] media: imx7.rst: Fix ReST syntax

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sphinx didn't like the code-blocks on this file:

	Documentation/media/v4l-drivers/imx7.rst:19: WARNING: Inline substitution_reference start-string without end-string.
	Documentation/media/v4l-drivers/imx7.rst:20: WARNING: Block quote ends without a blank line; unexpected unindent.
	Documentation/media/v4l-drivers/imx7.rst:27: WARNING: Inline substitution_reference start-string without end-string.
	Documentation/media/v4l-drivers/imx7.rst:79: WARNING: Error in "code-block" directive:
	maximum 1 argument(s) allowed, 26 supplied.

	.. code-block:: none
	   # Setup links
	<snip/>
	   media-ctl -V "'csi':0 [fmt:SBGGR10_1X10/800x600 field:none]"
	Documentation/media/v4l-drivers/imx7.rst:96: WARNING: Error in "code-block" directive:
	maximum 1 argument(s) allowed, 9 supplied.

	.. code-block:: none
	<snip/>.
	                    -> "imx7-mipi-csis.0":0 [ENABLED]

Fix them, in order to match the expected syntax for code blocks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
 Documentation/media/v4l-drivers/imx7.rst | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/media/v4l-drivers/imx7.rst b/Documentation/media/v4l-drivers/imx7.rst
index 804d900da535..fe411f65c01c 100644
--- a/Documentation/media/v4l-drivers/imx7.rst
+++ b/Documentation/media/v4l-drivers/imx7.rst
@@ -15,9 +15,10 @@ For image capture the i.MX7 has three units:
 - Video Multiplexer
 - MIPI CSI-2 Receiver
 
-::
-                                           |\
-   MIPI Camera Input ---> MIPI CSI-2 --- > | \
+.. code-block:: none
+
+   MIPI Camera Input ---> MIPI CSI-2 --- > |\
+                                           | \
                                            |  \
                                            | M |
                                            | U | ------>  CSI ---> Capture
@@ -77,6 +78,7 @@ CSI-2 receiver. The following example configures a video capture pipeline with
 an output of 800x600, and BGGR 10 bit bayer format:
 
 .. code-block:: none
+
    # Setup links
    media-ctl -l "'ov2680 1-0036':0 -> 'imx7-mipi-csis.0':0[1]"
    media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi_mux':1[1]"
@@ -94,6 +96,7 @@ After this streaming can start. The v4l2-ctl tool can be used to select any of
 the resolutions supported by the sensor.
 
 .. code-block:: none
+
     root@imx7s-warp:~# media-ctl -p
     Media controller API version 4.17.0
 
-- 
2.20.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux