Mauro, Please pulll change: http://udev.netup.ru/hg/v4l-dvb-aospan-22fix/ "22-kHz set_tone fix for NetUP Dual DVB-S2-CI card". Description: 22-kHz tone can be driven in two ways: 1. LNBH24 can produce 22kHz continuous tone when TEN=1 ( 22 KHz tone output is always activated ). 2. LNBH24 can reproduce 22kHz tone timings from DSQIN or EXTM pin's when TEN=0. From LNBH24 datasheet: "In order to improve design flexibility an external tone input pin is available (EXTM). The EXTM is a Logic input pin which activates the 22 kHz tone output, on the VoTX pin, by using the LNBH24 integrated tone generator (similar to the DSQIN pin function). In fact, the output tone waveform characteristics will always be internally controlled by the LNBH24 tone generator and the EXTM signal will be used as a timing control for DiSEqC tone data encoding on the VoTX output." In NetUP Dual DVB-S2-CI card 22kHz tone timings on EXTM pin produced by STV0900 demod: .set_tone = stv0900_set_tone redefine to "set_tone = lnbp21_set_tone" is not correct for "NetUP Dual DVB-S2-CI card". -- Abylai Ospan <aospan@xxxxxxxx> NetUP Inc. P.S. Also I think diseqc doesn't work when TEN bit enabled in LNBH24 (22kHz tone can't be modulated by demod), but need to check ...
Attachment:
signature.asc
Description: This is a digitally signed message part
