Hi Yong,
On Sat, Sep 29, 2018 at 06:18:44PM +0800, Yong wrote:
> Hi Sakari,
>
> On Fri, 28 Sep 2018 13:19:37 +0300
> Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> wrote:
>
> > Hi Yong,
> >
> > Thanks for the update! This looks pretty good; some small bits to fix
> > still, please see my comments below.
> >
> > On Wed, Sep 26, 2018 at 04:43:40PM +0800, Yong Deng wrote:
> > > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
> > > interface and CSI1 is used for parallel interface. This is not
> > > documented in datasheet but by test and guess.
> > >
> > > This patch implement a v4l2 framework driver for it.
> > >
> > > Currently, the driver only support the parallel interface. MIPI-CSI2,
> > > ISP's support are not included in this patch.
> > >
>
> ...
>
> > > +
> > > +static void sun6i_csi_v4l2_cleanup(struct sun6i_csi *csi)
> > > +{
> > > + v4l2_async_notifier_unregister(&csi->notifier);
> > > + v4l2_async_notifier_cleanup(&csi->notifier);
> > > + sun6i_video_cleanup(&csi->video);
> > > + v4l2_device_unregister(&csi->v4l2_dev);
> > > + media_device_unregister(&csi->media_dev);
> >
> > Please unregister the media device as first.
>
> I notice that the release order of intel ipu3 is:
> cio2_notifier_exit(cio2);
> cio2_fbpt_exit_dummy(cio2);
> for (i = 0; i < CIO2_QUEUES; i++)
> cio2_queue_exit(cio2, &cio2->queue[i]);
> v4l2_device_unregister(&cio2->v4l2_dev);
> media_device_unregister(&cio2->media_dev);
> media_device_cleanup(&cio2->media_dev);
> mutex_destroy(&cio2->lock);
Well, yeah... this doesn't make a big difference after all. Unregistering
the media device first is still preferred.
>
> >
> > You're missing freeing the control handler.
> >
> > > + media_device_cleanup(&csi->media_dev);
> > > +}
> > > +
> > > +static int sun6i_csi_v4l2_init(struct sun6i_csi *csi)
> > > +{
> > > + int ret;
> > > +
> > > + csi->media_dev.dev = csi->dev;
> > > + strlcpy(csi->media_dev.model, "Allwinner Video Capture Device",
> > > + sizeof(csi->media_dev.model));
> >
> > strscpy, please.
> >
> > > + csi->media_dev.hw_revision = 0;
> > > +
> > > + media_device_init(&csi->media_dev);
> > > +
> > > + ret = v4l2_ctrl_handler_init(&csi->ctrl_handler, 0);
> >
> > Do you need controls? The driver doesn't appear to register any.
>
> Some one suggest this. They want the drver can pass control queries to
> the subdev.
If you need that, it should be done in the user space instead. The imx
staging driver does so but it is not supported by the control framework:
you may only call v4l2_ctrl_handler_free() for the purpose of freeing the
resources of the control handler --- not while it is still accessible from
the user space.
>
> >
> > > + if (ret) {
> > > + dev_err(csi->dev, "V4L2 controls handler init failed (%d)\n",
> > > + ret);
> > > + goto clean_media;
> > > + }
> > > +
> > > + csi->v4l2_dev.mdev = &csi->media_dev;
> > > + csi->v4l2_dev.ctrl_handler = &csi->ctrl_handler;
> > > + ret = v4l2_device_register(csi->dev, &csi->v4l2_dev);
> > > + if (ret) {
> > > + dev_err(csi->dev, "V4L2 device registration failed (%d)\n",
>
> ...
>
> > > +
> > > +/*
> > > + * PHYS_OFFSET isn't available on all architectures. In order to
> > > + * accomodate for COMPILE_TEST, let's define it to something dumb.
> > > + */
> > > +#ifndef PHYS_OFFSET
> >
> > How about:
> >
> > #if !defined(CONFIG_COMPILE_TEST) && !defined(PHYS_OFFSET)
>
> Do you mean:
> #if defined(CONFIG_COMPILE_TEST) && !defined(PHYS_OFFSET)
Oh, yes. Indeed.
--
Kind regards,
Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx
