[PATCH v2 0/3] rcar-vin: add support for UDS (Up Down Scaler)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This series adds support for Renesas R-Car Gen3 VIN Up Down Scaler
(UDS). Some VIN instances have access to a often shared UDS which can be
used to scale the captured image up or down. If the scaler is shared it
can only be used exclusively by one VIN at a time, switching in runtime
and detection if a UDS are in use is supported in this series. If the
user tries to start a capture on a VIN which would require the use of a
scaler but that scaler is in use -EBUSY is returned.

Patch 1/3 fix a format alignment issue found when working with UDS
support. While patch 2/3 ands the UDS logic and 3/3 defines which VIN on
which SoC have access to a UDS and how it's shared.

The series is based on top of media-tree/master and is tested on R-Car
Gen3 H3, M3-W, M3-N and Gen2 Koelsch (checking for regressions as Gen2
have no UDS).

* Changes since v1
- Patch 1/3 have been replaced with a less strict version after good 
  comments from Hans.

Niklas Söderlund (3):
  rcar-vin: align width before stream start
  rcar-vin: add support for UDS (Up Down Scaler)
  rcar-vin: declare which VINs can use a Up Down Scaler (UDS)

 drivers/media/platform/rcar-vin/rcar-core.c |  18 +++
 drivers/media/platform/rcar-vin/rcar-dma.c  | 139 ++++++++++++++++++--
 drivers/media/platform/rcar-vin/rcar-v4l2.c |   9 ++
 drivers/media/platform/rcar-vin/rcar-vin.h  |  24 ++++
 4 files changed, 180 insertions(+), 10 deletions(-)

-- 
2.19.0




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux