Actually, i have not heard of other chipset's revision about task1530k since 2008 (http://article.gmane.org/gmane.linux.drivers.spca50x.devel/2826 ) But it's possible that , there will be many others cam using that. Luis, in fact there seem's to be a pattern against revision & chipset id -> sensor, but actually, i cannot assure that there'nt an exception. Jean, should decide on that :) pd: Jean, I am waiting for the user that was doing the patch for the t613 against a new sensor... :) Best Regards On Wed, Dec 16, 2009 at 1:34 AM, Luis Maia <lmaia@xxxxxxxxxxxx> wrote: > I found an email that discussed the similar problem that my camera had, > showing up just a black screen, it's dated but i think maybe it wasn't > fully solved because there's no answer. > > http://osdir.com/ml/drivers.spca50x.devel/2006-11/msg00036.html > > Note the : ">/ > /Vimicro/zc3xx.h: [zcxx_probeSensor:307] sensor 3w Vga ??? > 0xC400" > > /Do you know if this was solved?! > Because i suspect that maybe there are more 0x?400 revision of the chipset. > Btw, if this is a pattern could we consider to mask the bits in retword > (retword &= 0x0FFF)? > Because looking at the current table it seems to make more sense. > > Best regards, > Luis Maia. > Jean-Francois Moine wrote: >> >> On Tue, 15 Dec 2009 10:25:29 -0300 >> leandro Costantino <lcostantino@xxxxxxxxx> wrote: >> >> >>> >>> Jean, >>> let me know , if you need to the test this patch, since i added the >>> tas1530k long time ago, and still have the webcam :) >>> Best Regards >>> >>> On Tue, Dec 15, 2009 at 4:54 AM, Jean-Francois Moine >>> <moinejf@xxxxxxx> wrote: >>> >>>> >>>> On Tue, 15 Dec 2009 03:45:00 +0000 >>>> Luis Maia <lmaia@xxxxxxxxxxxx> wrote: >>>> >>>> >>>>> >>>>> Added extra chipset revision (sensor) to fix camera zc0301 with >>>>> ID: 0ac8:301b . >>>>> Since i own one of this cameras fixed and tested it. >>>>> ------------- >>>>> >>>>> diff -uNr linux-2.6.32.1/drivers/media/video/gspca/zc3xx.c >>>>> linux-2.6.32.1-patch/drivers/media/video/gspca/zc3xx.c >>>>> --- linux-2.6.32.1/drivers/media/video/gspca/zc3xx.c 2009-12-14 >>>>> 17:47:25.000000000 +0000 >>>>> +++ linux-2.6.32.1-patch/drivers/media/video/gspca/zc3xx.c >>>>> 2009-12-15 02:42:13.000000000 +0000 >>>>> @@ -6868,6 +6868,7 @@ >>>>> {0x8001, 0x13}, >>>>> {0x8000, 0x14}, /* CS2102K */ >>>>> {0x8400, 0x15}, /* TAS5130K */ >>>>> + {0xe400, 0x15}, >>>>> }; >>>>> >>>>> static int vga_3wr_probe(struct gspca_dev *gspca_dev) >>>>> @@ -7634,7 +7635,7 @@ >>>>> {USB_DEVICE(0x0698, 0x2003)}, >>>>> {USB_DEVICE(0x0ac8, 0x0301), .driver_info = SENSOR_PAS106}, >>>>> {USB_DEVICE(0x0ac8, 0x0302), .driver_info = SENSOR_PAS106}, >>>>> - {USB_DEVICE(0x0ac8, 0x301b)}, >>>>> + {USB_DEVICE(0x0ac8, 0x301b), .driver_info = SENSOR_PB0330}, >>>>> {USB_DEVICE(0x0ac8, 0x303b)}, >>>>> {USB_DEVICE(0x0ac8, 0x305b), .driver_info = >>>>> SENSOR_TAS5130C_VF0250}, {USB_DEVICE(0x0ac8, 0x307b)}, >>>>> >> >> Hello Luis and Leandro, >> >> Thanks for the patch. Luis said his sensor is the tas5130K, so the 2nd >> part of the patch is useless. But, maybe, Leandro, have you heard about >> other chipset revision IDs? >> >> Best regards. >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
