Hi Mauro,
On 18-07-30 15:09, Mauro Carvalho Chehab wrote:
> Em Thu, 28 Jun 2018 18:20:48 +0200
> Marco Felsch <m.felsch@xxxxxxxxxxxxxx> escreveu:
>
> > From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> >
> > Add the querystd video_op and make it return V4L2_STD_UNKNOWN while the
> > TVP5150 is not locked to a signal.
> >
> > Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> > ---
> > drivers/media/i2c/tvp5150.c | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> > index 99d887936ea0..1990aaa17749 100644
> > --- a/drivers/media/i2c/tvp5150.c
> > +++ b/drivers/media/i2c/tvp5150.c
> > @@ -796,6 +796,15 @@ static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
> > }
> > }
> >
> > +static int tvp5150_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
> > +{
> > + struct tvp5150 *decoder = to_tvp5150(sd);
> > +
> > + *std_id = decoder->lock ? tvp5150_read_std(sd) : V4L2_STD_UNKNOWN;
>
> This patch requires rework. What happens when a device doesn't have
> IRQ enabled? Perhaps it should, instead, read some register in order
> to check for the locking status, as this would work on both cases.
If IRQ isn't enabled, decoder->lock is set to always true during
probe(). So this case should be fine.
Regards,
Marco
> > +
> > + return 0;
> > +}
> > +
> > static const struct v4l2_event tvp5150_ev_fmt = {
> > .type = V4L2_EVENT_SOURCE_CHANGE,
> > .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
> > @@ -1408,6 +1417,7 @@ static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
> >
> > static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
> > .s_std = tvp5150_s_std,
> > + .querystd = tvp5150_querystd,
> > .s_stream = tvp5150_s_stream,
> > .s_routing = tvp5150_s_routing,
> > .g_mbus_config = tvp5150_g_mbus_config,
>
>
>
> Thanks,
> Mauro
>
