Em Thu, 28 Jun 2018 18:20:48 +0200
Marco Felsch <m.felsch@xxxxxxxxxxxxxx> escreveu:
> From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
>
> Add the querystd video_op and make it return V4L2_STD_UNKNOWN while the
> TVP5150 is not locked to a signal.
>
> Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/tvp5150.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index 99d887936ea0..1990aaa17749 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -796,6 +796,15 @@ static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
> }
> }
>
> +static int tvp5150_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
> +{
> + struct tvp5150 *decoder = to_tvp5150(sd);
> +
> + *std_id = decoder->lock ? tvp5150_read_std(sd) : V4L2_STD_UNKNOWN;
This patch requires rework. What happens when a device doesn't have
IRQ enabled? Perhaps it should, instead, read some register in order
to check for the locking status, as this would work on both cases.
> +
> + return 0;
> +}
> +
> static const struct v4l2_event tvp5150_ev_fmt = {
> .type = V4L2_EVENT_SOURCE_CHANGE,
> .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
> @@ -1408,6 +1417,7 @@ static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
>
> static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
> .s_std = tvp5150_s_std,
> + .querystd = tvp5150_querystd,
> .s_stream = tvp5150_s_stream,
> .s_routing = tvp5150_s_routing,
> .g_mbus_config = tvp5150_g_mbus_config,
Thanks,
Mauro
